On 12.01.2015 12:55, Hans Verkuil wrote:
On 01/11/2015 10:33 AM, Raimonds Cicans wrote:
After upgrade from kernel 3.13.10 (do not have commit) to 3.17.7
(have commit) I started receiving following IOMMU related messages:
This makes no sense. The cx23885 driver in 3.17.7 doesn't use vb2.
Are you using the media_build repo perhaps to install the latest media
drivers on a 3.17 kernel?
Sorry for misinforming you. IMHO I saw somewhere that 453afdd
was included in 3.17.0-rc_something.
In last two weeks I did too much tests.
As far as I remember kernel / driver combinations was following
3.13.10 built in driver - not affected
3.17.7 + https://github.com/ljalves/linux_media (media tree + few new
TBS open source drivers) - affected
3.18.1 + https://github.com/ljalves/linux_media (media tree + few new
TBS open source drivers) - affected
3.19.0-rc3 built in driver (+ few new TBS open source drivers injected
by https://github.com/bas-t/saa716x-intree) - affected
Bisection I did on pure 3.13.10 + pure media tree
As you can see bug(s) are kernel version agnostic
1)
AMD-Vi: Event logged [IO_PAGE_FAULT device=0a:00.0 domain=0x001d
address=0x000000000637c000 flags=0x0000]
where device=0a:00.0 is TBS6981 card
sometimes this message was followed by storm of following messages:
cx23885[0]: mpeg risc op code error
This looks awfully like the bug that is fixed in commit
7675fe99d280ea83388a4382c54573c80db37cda.
...
2)
------------[ cut here ]------------
WARNING: CPU: 1 PID: 6946 at drivers/iommu/amd_iommu.c:2637
dma_ops_domain_unmap.part.12+0x55/0x72()
CPU: 1 PID: 6946 Comm: w_scan Tainted: G W 3.19.0-rc3-myrc01 #1
Hmm, and this says 3.19-rc3.
I really need to know what kernel and media drivers you are using!
Look above
Yesterday I did git bisect on Linux media tree (v3.13 - HEAD)
and found that your commit is guilty in the first message.
Try with commit 7675fe99d280ea83388a4382c54573c80db37cda.
Did not help. Same errors.
I think the only relevant bug is #2. Just before Christmas I found some
issues with the vb2 threading code, although that was for video output streams,
not video capture. But it may well be that similar problems exist for capture.
I'll look at that this week or early next week.
I did new checks on 3.18.2 + https://github.com/ljalves/linux_media
(media tree + few new TBS open source drivers)
and found strange coincidence:
I did two tests in following way: started w_scan on first front-end and
after 5-10 seconds on second
and after some time received first bug in both tests.
Than just for fun reversed order.
I did two tests in following way: started w_scan on second front-end and
after 5-10 seconds on first
and after some time received second bug followed after some time by
first bug in both tests.
Then I wanted to check following sequences:
1) init first front-end -> start scan on second -> start scan on first
2) init second front-end -> start scan on first -> start scan on second
By init I mean: run dvb-fe-tool -sDVBS -a0 // or -a1
But on first test of first sequence I received new bug:
[ 369.295899] BUG: unable to handle kernel NULL pointer dereference
at (nil)
[ 369.295945] IP: [<ffffffffc05173df>] cx23885_buf_prepare+0x8c/0xa9
[cx23885]
[ 369.295989] PGD 0
[ 369.296002] Oops: 0000 [#1] SMP
[ 369.296020] Modules linked in: ip6table_filter ip6_tables act_police
cls_basic cls_flow cls_fw cls_u32 sch_fq_codel sch_tbf sch_prio sch_htb
sch_hfsc sch_ingress sch_sfq xt_CHECKSUM ipt_rpfilter xt_statistic xt_CT
xt_realm xt_addrtype xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4
ipt_ECN ipt_CLUSTERIP ipt_ah xt_set nf_nat_ftp xt_time xt_TCPMSS
xt_tcpmss xt_policy xt_pkttype xt_physdev br_netfilter xt_NFQUEUE
xt_NFLOG xt_mark xt_mac xt_length xt_helper xt_hashlimit xt_DSCP xt_dscp
xt_CLASSIFY xt_AUDIT iptable_raw iptable_nat nf_nat_ipv4 nf_nat
iptable_mangle hwmon_vid bridge stp llc ipv6 cx25840(O)
snd_hda_codec_hdmi snd_usb_audio snd_hwdep uvcvideo(O) snd_usbmidi_lib
videobuf2_vmalloc(O) snd_rawmidi ir_lirc_codec(O) ir_xmp_decoder(O)
lirc_dev(O) ir_mce_kbd_decoder(O) ir_sharp_decoder(O) ir_sanyo_decoder(O)
[ 369.296375] ir_sony_decoder(O) ir_jvc_decoder(O) ir_rc6_decoder(O)
ir_rc5_decoder(O) ir_nec_decoder(O) rc_rc6_mce(O) mceusb(O) cx23885(O)
tveeprom(O) cx2341x(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O)
videobuf2_memops(O) videobuf2_core(O) v4l2_common(O) videodev(O) k10temp
rc_core(O) microcode saa716x_core(O) dvb_core(O) cx24117(O) i2c_piix4
snd_hda_intel snd_hda_controller snd_hda_codec r8169 mii nouveau ttm
drm_kms_helper
[ 369.296547] CPU: 0 PID: 7016 Comm: vb2-cx23885[0] Tainted:
G O 3.18.1-hardened-r1-myrc06-NOSEC #1
[ 369.296574] Hardware name: To be filled by O.E.M. To be filled by
O.E.M./M5A97 LE R2.0, BIOS 2501 04/09/2014
[ 369.296601] task: ffff88020c720830 ti: ffff88020c720db0 task.ti:
ffff88020c720db0
[ 369.296622] RIP: 0010:[<ffffffffc05173df>] [<ffffffffc05173df>]
cx23885_buf_prepare+0x8c/0xa9 [cx23885]
[ 369.296664] RSP: 0000:ffff88020adc3dc8 EFLAGS: 00010202
[ 369.296680] RAX: 0000000000005e00 RBX: ffff88009ce07400 RCX:
00000000000002f0
[ 369.296703] RDX: 0000000000000001 RSI: ffff88009ce07760 RDI:
ffff880236af1000
[ 369.296722] RBP: ffff880234645568 R08: 0000000000000020 R09:
000000000000ba06
[ 369.296741] R10: 000000000000b800 R11: 000000000000b731 R12:
0000000000005e00
[ 369.296760] R13: ffff880234644000 R14: 0000000000000000 R15:
0000000000000000
[ 369.296780] FS: 00007fe5ff77a700(0000) GS:ffff88023fc00000(0000)
knlGS:0000000000000000
[ 369.296801] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 369.296818] CR2: 0000000000000000 CR3: 0000000208ab2000 CR4:
00000000000007f0
[ 369.296836] Stack:
[ 369.296845] ffff88009ce07400 ffff88009ce07400 0000000000000000
ffff88009ce07058
[ 369.296875] ffff8800b2c47d40 ffffffffc04caf21 ffff8802334c6d68
ffff8802346454f0
[ 369.296903] ffff8802334c6828 ffff88009ce07400 0000000000000000
ffffffffc04cb3bb
[ 369.296932] Call Trace:
[ 369.296960] [<ffffffffc04caf21>] ? __buf_prepare+0x1a6/0x25f
[videobuf2_core]
[ 369.296994] [<ffffffffc04cb3bb>] ? vb2_internal_qbuf+0x4c/0x1b7
[videobuf2_core]
[ 369.297028] [<ffffffffc04cb6b2>] ? vb2_thread+0x18c/0x1eb
[videobuf2_core]
[ 369.297060] [<ffffffffc04cb526>] ? vb2_internal_qbuf+0x1b7/0x1b7
[videobuf2_core]
[ 369.297086] [<ffffffff970d2fc4>] ? kthread+0xc5/0xcd
[ 369.297106] [<ffffffff970d2eff>] ? kthread_create_on_node+0x155/0x155
[ 369.297129] [<ffffffff97672d54>] ? ret_from_fork+0x74/0xa0
[ 369.297149] [<ffffffff970d2eff>] ? kthread_create_on_node+0x155/0x155
[ 369.297166] Code: 49 63 c4 48 39 c1 72 32 85 d2 74 04 44 89 63 58 8b
8d f0 00 00 00 49 8b bd 18 01 00 00 48 8d b3 60 03 00 00 44 8b 85 f4 00
00 00 <49> 8b 16 45 31 c9 e8 a6 f2 ff ff 31 c0 eb 05 b8 ea ff ff ff 5b
[ 369.297397] RIP [<ffffffffc05173df>] cx23885_buf_prepare+0x8c/0xa9
[cx23885]
[ 369.297431] RSP <ffff88020adc3dc8>
[ 369.297443] CR2: 0000000000000000
[ 369.302964] ---[ end trace a7bff82df7b103ca ]---
I called "shutdown -r 0" but computer did not reappeared (I accessed it
remotely).
Even built in watchdog did not help.
I will try to continue test last 2 sequences after somebody returns home
and restarts computer.
Thank you.
Raimonds Cicans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
