RE: [PATCH 1/3] s5p-mfc-v6+: Use display_delay_enable CID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Nicolas Dufresne [mailto:nicolas.dufresne@xxxxxxxxxxxxx]
> Sent: Monday, December 15, 2014 10:11 PM
> To: linux-media@xxxxxxxxxxxxxxx
> Cc: Kamil Debski; Arun Kumar K; Nicolas Dufresne
> Subject: [PATCH 1/3] s5p-mfc-v6+: Use display_delay_enable CID
> 
> The MFC driver has two controls, DISPLAY_DELAY and DISPLAY_DELAY_ENABLE
> that allow forcing the decoder to return a decoded frame sooner
> regardless of the order. The added support for firmware version 6 and
> higher was not taking into account the DISPLAY_DELAY_ENABLE boolean.
> Instead it had a comment stating that DISPLAY_DELAY should be set to a
> negative value to disable it. This is not possible since the control
> range is from 0 to 65535. This feature was also supposed to be disabled
> by default in order to produce frames in display order.
> 
> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>

Acked-by: Kamil Debski <k.debski@xxxxxxxxxxx>

> ---
>  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 6 +-----
>  1 file changed, 1 insertion(+), 5 deletions(-)
> 
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> index 92032a0..0675515 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> @@ -1340,11 +1340,7 @@ static int s5p_mfc_init_decode_v6(struct
> s5p_mfc_ctx *ctx)
>  	/* FMO_ASO_CTRL - 0: Enable, 1: Disable */
>  	reg |= (fmo_aso_ctrl << S5P_FIMV_D_OPT_FMO_ASO_CTRL_MASK_V6);
> 
> -	/* When user sets desplay_delay to 0,
> -	 * It works as "display_delay enable" and delay set to 0.
> -	 * If user wants display_delay disable, It should be
> -	 * set to negative value. */
> -	if (ctx->display_delay >= 0) {
> +	if (ctx->display_delay_enable) {
>  		reg |= (0x1 << S5P_FIMV_D_OPT_DDELAY_EN_SHIFT_V6);
>  		writel(ctx->display_delay, mfc_regs->d_display_delay);
>  	}
> --
> 2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux