dtv_property_legacy_params_sync: doesn't know how to handle a DVBv3 call to delivery system 0
Hi,
I'm new to this list, just updated VDR (2.06) and a newer kernel (3.12)
and getting
the above messages from my dtt200u receiver fill my kernel log.
Is there a straightforward way to stop them?
The suggestion from the VDR list is that this is a driver issue.
dvb-fe-tool gives the following output but can't set the V5 delivery
system for some reason.
Thanks
INFO Device WideView USB DVB-T (/dev/dvb/adapter0/frontend0) capabilities:
INFO CAN_FEC_1_2
INFO CAN_FEC_2_3
INFO CAN_FEC_3_4
INFO CAN_FEC_5_6
INFO CAN_FEC_7_8
INFO CAN_FEC_AUTO
INFO CAN_GUARD_INTERVAL_AUTO
INFO CAN_HIERARCHY_AUTO
INFO CAN_INVERSION_AUTO
INFO CAN_QAM_16
INFO CAN_QAM_64
INFO CAN_QAM_AUTO
INFO CAN_QPSK
INFO CAN_RECOVER
INFO CAN_TRANSMISSION_MODE_AUTO
INFO DVB API Version 5.10, Current v5 delivery system: UNDEFINED
INFO Supported delivery system:
INFO DVBT
INFO Got parameters for DVBT:
INFO FREQUENCY = 0
INFO MODULATION = QPSK
INFO BANDWIDTH_HZ = 0
INFO INVERSION = OFF
INFO CODE_RATE_HP = NONE
INFO CODE_RATE_LP = NONE
INFO GUARD_INTERVAL = 1/32
INFO TRANSMISSION_MODE = 2K
INFO HIERARCHY = NONE
INFO DELIVERY_SYSTEM = DVBT
INFO FREQUENCY = 0
INFO MODULATION = QPSK
INFO BANDWIDTH_HZ = 0
INFO INVERSION = OFF
INFO CODE_RATE_HP = NONE
INFO CODE_RATE_LP = NONE
INFO GUARD_INTERVAL = 1/32
INFO TRANSMISSION_MODE = 2K
INFO HIERARCHY = NONE
INFO DELIVERY_SYSTEM = DVBT
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
