A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK
but the endpoint otheriwse functions as interrupt.
Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe.
Signed-off-by: Malcolm Priestley <tvboxspy@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
drivers/media/usb/dvb-usb-v2/lmedm04.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c
index f1edb29..15db9f6 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -354,6 +354,7 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap_to_d(adap);
struct lme2510_state *lme_int = adap_to_priv(adap);
+ struct usb_host_endpoint *ep;
lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
@@ -375,6 +376,12 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap)
adap,
8);
+ /* Quirk of pipe reporting PIPE_BULK but behaves as interrupt */
+ ep = usb_pipe_endpoint(d->udev, lme_int->lme_urb->pipe);
+
+ if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
+ lme_int->lme_urb->pipe = usb_rcvbulkpipe(d->udev, 0xa),
+
lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
