On Sat, 2014-12-27 at 10:35 +0100, Jurgen Kramer wrote: > I am seeing kernel oopses using recent media_builds on kernel 3.17: > > [ 506.969697] BUG: unable to handle kernel NULL pointer dereference at > 0000000000000058 > [ 506.969720] IP: [<ffffffffa03a233a>] vb2_thread+0x17a/0x480 > [videobuf2_core] > [ 506.969739] PGD 0 > [ 506.969746] Oops: 0002 [#1] SMP > [ 506.969754] Modules linked in: nf_conntrack_netbios_ns > nf_conntrack_broadcast cfg80211 rfkill ip6t_rpfilter ip6t_REJECT > xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter > ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 > ip6table_mangle ip6table_security ip6table_raw ip6table_filter > ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 > nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw sp2(OE) > si2157(OE) si2168(OE) i2c_mux nouveau cx25840(OE) cx23885(OE) > altera_ci(OE) tda18271(OE) altera_stapl(OE) videobuf2_dvb(OE) > videobuf2_core(OE) videobuf2_dma_sg(OE) videobuf2_memops(OE) snd_seq > snd_seq_device snd_pcm snd_timer snd video i2c_algo_bit ttm > drm_kms_helper soundcore iTCO_wdt ppdev gpio_ich iTCO_vendor_support > tveeprom(OE) cx2341x(OE) > [ 506.969871] coretemp dvb_core(OE) v4l2_common(OE) videodev(OE) > media(OE) kvm crc32c_intel raid456 async_raid6_recov async_memcpy > async_pq async_xor drm xor async_tx raid6_pq microcode serio_raw shpchp > i7core_edac edac_core i2c_i801 lpc_ich mfd_core parport_pc parport > ite_cir(OE) rc_core(OE) tpm_infineon tpm_tis tpm acpi_cpufreq nfsd > auth_rpcgss nfs_acl lockd sunrpc mxm_wmi asix usbnet r8169 mii wmi > [ 506.969970] CPU: 0 PID: 3160 Comm: vb2-cx23885[0] Tainted: G > OE 3.17.4-200.fc20.x86_64 #1 > [ 506.969982] Hardware name: To Be Filled By O.E.M. To Be Filled By > O.E.M./P55 Extreme, BIOS P2.70 08/20/2010 > [ 506.969993] task: ffff8800bc18e220 ti: ffff88020d36c000 task.ti: > ffff88020d36c000 > [ 506.970002] RIP: 0010:[<ffffffffa03a233a>] [<ffffffffa03a233a>] > vb2_thread+0x17a/0x480 [videobuf2_core] > [ 506.970021] RSP: 0018:ffff88020d36fe68 EFLAGS: 00010246 > [ 506.970663] RAX: 0000000000000000 RBX: 0000000000000000 RCX: > 000000000000000b > [ 506.971305] RDX: 0000000000000058 RSI: ffff8800bc18e220 RDI: > 0000000000000058 > [ 506.971952] RBP: ffff88020d36fec0 R08: ffff88020d36c000 R09: > 000000000000158f > [ 506.972611] R10: 00000000000030de R11: 0000000000000010 R12: > 0000000000000058 > [ 506.973275] R13: ffff8800b81814a0 R14: 0000000000000000 R15: > ffff880225c61028 > [ 506.973947] FS: 0000000000000000(0000) GS:ffff880233c00000(0000) > knlGS:0000000000000000 > [ 506.974634] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 506.975321] CR2: 0000000000000058 CR3: 0000000001c14000 CR4: > 00000000000007f0 > [ 506.976021] Stack: > [ 506.976723] ffff8800bc18e220 0000000000000070 00ffffff81c1b460 > 0000000000000000 > [ 506.977442] ffff880200000000 ffff880225c61028 ffff88020d1d8480 > ffff880225c61028 > [ 506.978165] ffffffffa03a21c0 0000000000000000 0000000000000000 > ffff88020d36ff48 > [ 506.979055] Call Trace: > [ 506.979795] [<ffffffffa03a21c0>] ? vb2_internal_qbuf+0x210/0x210 > [videobuf2_core] > [ 506.980545] [<ffffffff810b0498>] kthread+0xd8/0xf0 > [ 506.981293] [<ffffffff810b03c0>] ? kthread_create_on_node > +0x190/0x190 > [ 506.982045] [<ffffffff8172e33c>] ret_from_fork+0x7c/0xb0 > [ 506.982806] [<ffffffff810b03c0>] ? kthread_create_on_node > +0x190/0x190 > [ 506.983568] Code: 89 e7 ba 58 00 00 00 0f 85 94 01 00 00 40 f6 c7 02 > 0f 85 72 01 00 00 40 f6 c7 04 0f 85 50 01 00 00 89 d1 31 c0 c1 e9 03 f6 > c2 04 <f3> 48 ab 74 0a c7 07 00 00 00 00 48 83 c7 04 f6 c2 02 74 0a 31 > [ 506.984464] RIP [<ffffffffa03a233a>] vb2_thread+0x17a/0x480 > [videobuf2_core] > [ 506.985306] RSP <ffff88020d36fe68> > [ 506.986147] CR2: 0000000000000058 > [ 506.990986] ---[ end trace 1973fbcab83c3353 ]--- > > First I thought is was related to CAM initialization but after removing > the CAMS and doing a fresh cold start I am still seeing the oopses. > After the oops everything is still functioning. I am using 3x DVBSKY > T980C. How can I debug this further? > The problem persist while my system went through a motherboard/mem/cpu upgrade. The oops occurs when one of the DVB-C cards get its first use (in my case mythtv): [ 102.050294] si2157 18-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw' [ 181.460968] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 181.460991] IP: [<ffffffffa04d833a>] vb2_thread+0x17a/0x480 [videobuf2_core] [ 181.461019] PGD 0 [ 181.461024] Oops: 0002 [#1] SMP [ 181.461032] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter cfg80211 rfkill ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw sp2(OE) si2157(OE) si2168(OE) i2c_mux cx25840(OE) cx23885(OE) altera_ci(OE) tda18271(OE) altera_stapl(OE) videobuf2_dvb(OE) videobuf2_core(OE) videobuf2_dma_sg(OE) videobuf2_memops(OE) snd_seq snd_seq_device x86_pkg_temp_thermal snd_pcm snd_timer coretemp snd soundcore tveeprom(OE) kvm_intel kvm cx2341x(OE) dvb_core(OE) rc_core(OE) v4l2_common(OE) videodev(OE) [ 181.461264] crct10dif_pclmul raid456 crc32_pclmul async_raid6_recov async_memcpy crc32c_intel media(OE) async_pq async_xor ghash_clmulni_intel xor async_tx microcode i915 i2c_algo_bit drm_kms_helper drm shpchp e1000e raid6_pq i2c_i801 ptp pps_core mei_me serio_raw mei i2c_hid sdhci_acpi sdhci tpm_tis mmc_core dw_dmac i2c_designware_platform dw_dmac_core i2c_designware_core tpm acpi_pad nfsd auth_rpcgss nfs_acl lockd sunrpc mxm_wmi wmi video [ 181.461374] CPU: 7 PID: 2279 Comm: vb2-cx23885[0] Tainted: G OE 3.17.7-200.fc20.x86_64 #1 [ 181.461393] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.50 12/17/2014 [ 181.461413] task: ffff8803f5f3f5c0 ti: ffff8800367a4000 task.ti: ffff8800367a4000 [ 181.461429] RIP: 0010:[<ffffffffa04d833a>] [<ffffffffa04d833a>] vb2_thread+0x17a/0x480 [videobuf2_core] [ 181.461460] RSP: 0018:ffff8800367a7e68 EFLAGS: 00010246 [ 181.461944] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b [ 181.462481] RDX: 0000000000000058 RSI: ffff8803f5f3f5c0 RDI: 0000000000000058 [ 181.462995] RBP: ffff8800367a7ec0 R08: ffff8800367a4000 R09: 0000000000000000 [ 181.463621] R10: 0000000000000004 R11: 0000000000000005 R12: 0000000000000058 [ 181.464151] R13: ffff880036875e80 R14: 0000000000000000 R15: ffff880400999028 [ 181.464660] FS: 0000000000000000(0000) GS:ffff88041fbc0000(0000) knlGS:0000000000000000 [ 181.465272] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.465804] CR2: 0000000000000058 CR3: 0000000001c14000 CR4: 00000000001407e0 [ 181.466441] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 181.466990] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 181.467541] Stack: [ 181.468094] ffff8803f5f3f5c0 0000000000000070 00ff880409993ae0 0000000000000000 [ 181.468672] ffff880300000000 ffff880400999028 ffff8803e81c83c0 ffff880400999028 [ 181.469334] ffffffffa04d81c0 0000000000000000 0000000000000000 ffff8800367a7f48 [ 181.469981] Call Trace: [ 181.470668] [<ffffffffa04d81c0>] ? vb2_internal_qbuf+0x210/0x210 [videobuf2_core] [ 181.471292] [<ffffffff810b04a8>] kthread+0xd8/0xf0 [ 181.471987] [<ffffffff810b03d0>] ? kthread_create_on_node +0x190/0x190 [ 181.472690] [<ffffffff8172ebbc>] ret_from_fork+0x7c/0xb0 [ 181.473333] [<ffffffff810b03d0>] ? kthread_create_on_node +0x190/0x190 [ 181.474081] Code: 89 e7 ba 58 00 00 00 0f 85 94 01 00 00 40 f6 c7 02 0f 85 72 01 00 00 40 f6 c7 04 0f 85 50 01 00 00 89 d1 31 c0 c1 e9 03 f6 c2 04 <f3> 48 ab 74 0a c7 07 00 00 00 00 48 83 c7 04 f6 c2 02 74 0a 31 [ 181.475582] RIP [<ffffffffa04d833a>] vb2_thread+0x17a/0x480 [videobuf2_core] [ 181.476271] RSP <ffff8800367a7e68> [ 181.476939] CR2: 0000000000000058 [ 181.479707] ---[ end trace fc6ff9e31c18c55f ]--- [ 183.034654] dvb_ca adapter 0: DVB CAM detected and initialised successfully [ 369.140017] dvb_ca adapter 1: DVB CAM detected and initialised successfully [ 449.206849] dvb_ca adapter 2: DVB CAM detected and initialised successfully The system works for a while after this oops but eventually gives out. Any pointers how to debug this would be appreciated. Jurgen -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
