Add board profile for Hauppauge WinTV-HVR5525.
Device is build upon following main components:
Conexant CX23888
Montage M88RS6000
Allegro A8293
Silicon Labs Si2168-B40
Silicon Labs Si2157-A30
Signed-off-by: Antti Palosaari <crope@xxxxxx>
---
drivers/media/pci/cx23885/Kconfig | 1 +
drivers/media/pci/cx23885/cx23885-cards.c | 43 ++++++++++++++
drivers/media/pci/cx23885/cx23885-dvb.c | 98 +++++++++++++++++++++++++++++++
drivers/media/pci/cx23885/cx23885.h | 1 +
4 files changed, 143 insertions(+)
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index f613314..74d774e 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -41,6 +41,7 @@ config VIDEO_CX23885
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_M88RS6000T if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
---help---
This is a video4linux driver for Conexant 23885 based
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index db99ca2..2a92bcd 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -706,6 +706,11 @@ struct cx23885_board cx23885_boards[] = {
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_HVR5525] = {
+ .name = "Hauppauge WinTV-HVR5525",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -989,6 +994,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x4254,
.subdevice = 0x0982,
.card = CX23885_BOARD_DVBSKY_T982,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0xf038,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR5525,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1161,6 +1170,8 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
case 85721:
/* WinTV-HVR1290 (PCIe, OEM, RCA in, IR,
Dual channel ATSC and Basic analog */
+ case 150329:
+ /* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */
break;
default:
printk(KERN_WARNING "%s: warning: "
@@ -1632,6 +1643,29 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
msleep(100);
cx23885_gpio_set(dev, GPIO_2);
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR5525:
+ /*
+ * GPIO-00 IR_WIDE
+ * GPIO-02 wake#
+ * GPIO-03 VAUX Pres.
+ * GPIO-07 PROG#
+ * GPIO-08 SAT_RESN
+ * GPIO-09 TER_RESN
+ * GPIO-10 B2_SENSE
+ * GPIO-11 B1_SENSE
+ * GPIO-15 IR_LED_STATUS
+ * GPIO-19 IR_NARROW
+ * GPIO-20 Blauster1
+ * ALTGPIO VAUX_SWITCH
+ * AUX_PLL_CLK : Blaster2
+ */
+ /* Put the parts into reset and back */
+ cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
+ cx23885_gpio_clear(dev, GPIO_8 | GPIO_9);
+ msleep(100);
+ cx23885_gpio_set(dev, GPIO_8 | GPIO_9);
+ msleep(100);
+ break;
}
}
@@ -1873,6 +1907,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR4400:
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
+ case CX23885_BOARD_HAUPPAUGE_HVR5525:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
@@ -1997,6 +2032,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR5525:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 0f60bc4..63c0de3 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -74,6 +74,7 @@
#include "sp2.h"
#include "m88ds3103.h"
#include "m88ts2022.h"
+#include "m88rs6000t.h"
static unsigned int debug;
@@ -915,6 +916,16 @@ static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
.agc = 0x99,
};
+static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = {
+ .i2c_addr = 0x69,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .ts_mode = M88DS3103_TS_PARALLEL,
+ .ts_clk = 16000,
+ .ts_clk_pol = 1,
+ .agc = 0x99,
+};
+
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{
struct cx23885_dev *dev = (struct cx23885_dev *)device;
@@ -1999,6 +2010,93 @@ static int dvb_register(struct cx23885_tsport *port)
}
port->i2c_client_tuner = client_tuner;
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR5525:
+ switch (port->nr) {
+ struct m88rs6000t_config m88rs6000t_config;
+
+ /* port b - satellite */
+ case 1:
+ /* attach frontend */
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ &hauppauge_hvr5525_m88ds3103_config,
+ &dev->i2c_bus[0].i2c_adap, &adapter);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach SEC */
+ if (!dvb_attach(a8293_attach, fe0->dvb.frontend,
+ &dev->i2c_bus[0].i2c_adap,
+ &hauppauge_a8293_config))
+ goto frontend_detach;
+
+ /* attach tuner */
+ memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config));
+ m88rs6000t_config.fe = fe0->dvb.frontend;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "m88rs6000t", I2C_NAME_SIZE);
+ info.addr = 0x21;
+ info.platform_data = &m88rs6000t_config;
+ request_module("%s", info.type);
+ client_tuner = i2c_new_device(adapter, &info);
+ if (!client_tuner || !client_tuner->dev.driver)
+ goto frontend_detach;
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+
+ /* delegate signal strength measurement to tuner */
+ fe0->dvb.frontend->ops.read_signal_strength =
+ fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+ break;
+ /* port c - terrestrial/cable */
+ case 2:
+ /* attach frontend */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.fe = &fe0->dvb.frontend;
+ si2168_config.ts_mode = SI2168_TS_SERIAL;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+ request_module("%s", info.type);
+ client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+ if (!client_demod || !client_demod->dev.driver)
+ goto frontend_detach;
+ if (!try_module_get(client_demod->dev.driver->owner)) {
+ i2c_unregister_device(client_demod);
+ goto frontend_detach;
+ }
+ port->i2c_client_demod = client_demod;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = fe0->dvb.frontend;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+ request_module("%s", info.type);
+ client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+ if (!client_tuner || !client_tuner->dev.driver) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index f55cd12..4f358eb 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -99,6 +99,7 @@
#define CX23885_BOARD_DVBSKY_S950 49
#define CX23885_BOARD_DVBSKY_S952 50
#define CX23885_BOARD_DVBSKY_T982 51
+#define CX23885_BOARD_HAUPPAUGE_HVR5525 52
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
