Am Mittwoch, den 10.12.2014, 22:04 -0200 schrieb Fabio Estevam:
> On Wed, Dec 10, 2014 at 7:54 PM, Pierluigi Passaro
> <pierluigi.passaro@xxxxxxxxxxxxxxxxxx> wrote:
> > Hi all,
> > I'm trying to use VPU code driver on iMX51 with kernel 3.18, following these
> > steps:
> > - disabled DVI interface
> > - enabled LCD interface
> > - configured and enabled VPU
> > - copied iMX51 vpu firmware without header and renamed
> > v4l-coda7541-imx53.bin in /lib/firmware
> >
> > Attached you can find the patch and the defconfig I used.
> >
> > The boot process hangs after loading the firmware at the first attempt of
> > writing in VPU address space in the function coda_write of file
> > driver/media/platform/coda/coda-common.c
> >
> > Is there anything preventing the coda driver to work with iMX51?
> > Could anyone provide any suggestion on how investigate the problem?
>
> I have only tested the coda driver on mx6, but looking at the
> mx51.dtsi you would need this:
>
> --- a/arch/arm/boot/dts/imx51.dtsi
> +++ b/arch/arm/boot/dts/imx51.dtsi
> @@ -121,6 +121,7 @@
> iram: iram@1ffe0000 {
> compatible = "mmio-sram";
> reg = <0x1ffe0000 0x20000>;
> + clocks = <&clks IMX5_CLK_OCRAM>;
> };
>
> ipu: ipu@40000000 {
> @@ -584,6 +585,18 @@
> clock-names = "ipg", "ahb", "ptp";
> status = "disabled";
> };
> +
> + vpu: vpu@83ff4000 {
> + compatible = "fsl,imx53-vpu";
This should be "fsl,imx51-vpu", and add a "cnm,codahx14".
According to the old imx-vpu-lib code and the vpu_fw_imx51.bin firmware
file, the i.MX51 has a CodaHx14 (0xF00A) as opposed to the i.MX53's
Coda7541 (0xF012).
> + reg = <0x83ff4000 0x1000>;
> + interrupts = <9>;
> + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
> + <&clks IMX5_CLK_VPU_GATE>;
> + clock-names = "per", "ahb";
> + resets = <&src 1>;
> + iram = <&iram>;
> + };
> };
> +
> };
> };
>
> Also, not sure if all the required coda patches are available in
> 3.18, so I tried it on linux-next 20141210 on a imx51-babbage (I had
> to disable USB, otherwise linux-next will hang on this board):
>
> [ 1.368454] coda 83ff4000.vpu: Initialized CODA7541.
> [ 1.373572] coda 83ff4000.vpu: Firmware version: 1.4.50
> [ 1.396695] coda 83ff4000.vpu: codec registered as /dev/video[0-3]
>
> Also, no sure if we need to distinguish mx51 versus mx53 in the coda driver.
>
> Adding Philipp in case he can comment.
Yes, the i.MX51 and i.MX53 firmware files are different. So at least an
entry for i.MX51 with the correct firmware file name has to be added.
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
