Moikka!
But that patch is rather useless :] Only thing needed is to change
existing value in file drivers/media/usb/dvb-usb-v2/rtl28xxu.c :
mn88472_config.i2c_wr_max = 22,
... and that leaves room for use even smaller values if there is an I2C
adapter which cannot write even 17 bytes.
2nd thing is to add comment mn88472.h to specify that max limit and
that's all.
regards
Antti
On 12/08/2014 10:31 PM, Benjamin Larsson wrote:
The max amount of payload bytes in each i2c transfer when
loading the demodulator firmware is 16 bytes.
Signed-off-by: Benjamin Larsson <benjamin@xxxxxxxxxxxx>
---
drivers/staging/media/mn88472/mn88472.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/mn88472/mn88472.c b/drivers/staging/media/mn88472/mn88472.c
index ffee187..df7dbe9 100644
--- a/drivers/staging/media/mn88472/mn88472.c
+++ b/drivers/staging/media/mn88472/mn88472.c
@@ -15,6 +15,7 @@
*/
#include "mn88472_priv.h"
+#define FW_BUF_SIZE 16
static int mn88472_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s)
@@ -331,10 +332,10 @@ static int mn88472_init(struct dvb_frontend *fe)
goto err;
for (remaining = fw->size; remaining > 0;
- remaining -= (dev->i2c_wr_max - 1)) {
+ remaining -= FW_BUF_SIZE) {
len = remaining;
- if (len > (dev->i2c_wr_max - 1))
- len = (dev->i2c_wr_max - 1);
+ if (len > FW_BUF_SIZE)
+ len = FW_BUF_SIZE;
ret = regmap_bulk_write(dev->regmap[0], 0xf6,
&fw->data[fw->size - remaining], len);
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
