Hi Josh,
Thank you for the patch.
On Monday 08 December 2014 19:29:07 Josh Wu wrote:
> Add the document for ov2640 dt.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> ---
> v1 -> v2:
> 1. change the compatible string to be consistent with verdor file.
That's nice, but you still need to send a patch to add the ovti vendor prefix
to Documentation/devicetree/bindings/vendor-prefixes.txt. It's not there yet.
> 2. change the clock and pins' name.
> 3. add missed pinctrl in example.
>
> .../devicetree/bindings/media/i2c/ov2640.txt | 44 +++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> b/Documentation/devicetree/bindings/media/i2c/ov2640.txt new file mode
> 100644
> index 0000000..15be3cb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> @@ -0,0 +1,44 @@
> +* Omnivision ov2640 CMOS sensor
> +
> +The Omnivision OV2640 sensor support multiple resolutions output, such as
> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
> +output format.
> +
> +Required Properties :
> +- compatible: Must be "ovti,ov2640"
> +- clocks: reference master clock, if using external fixed clock, you
> + no need to have such property.
That's not true anymore, the clocks property is mandatory in all cases. Just
describe it as
- clocks: reference to the xvclk input clock.
> +- clock-names: Must be "xvclk", it means the master clock for ov2640.
I would drop "it means the master clock for ov2640".
> +Optional Properties:
> +- resetb-gpios: reset pin
- resetb-gpios: reference to the GPIO connected to the resetb pin, if any.
> +- pwdn-gpios: power down pin
- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.
> +
> +The device node must contain one 'port' child node for its digital output
> +video port, in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +
> + i2c1: i2c@f0018000 {
> + ov2640: camera@0x30 {
> + compatible = "ovti,ov2640";
> + reg = <0x30>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn
&pinctrl_ov2640_reset>;
> +
> + resetb-gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
> + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
> +
> + clocks = <&pck1>;
> + clock-names = "xvclk";
> +
> + port {
> + ov2640_0: endpoint {
> + remote-endpoint = <&isi_0>;
> + bus-width = <8>;
> + };
> + };
> + };
> + };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
