Re: [PATCH 2/2] mn88472: fix firmware loading

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/08/2014 12:10 AM, Benjamin Larsson wrote:
The firmware must be loaded one byte at a time via the 0xf6 register.

I don't think so. Currently it downloads firmware in 22 byte chunks and it seems to work, at least for me, both mn88472 and mn88473.

Signed-off-by: Benjamin Larsson <benjamin@xxxxxxxxxxxx>
---
  drivers/staging/media/mn88472/mn88472.c | 21 +++++++--------------
  1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/media/mn88472/mn88472.c b/drivers/staging/media/mn88472/mn88472.c
index ffee187..ba1bc8d 100644
--- a/drivers/staging/media/mn88472/mn88472.c
+++ b/drivers/staging/media/mn88472/mn88472.c
@@ -290,7 +290,7 @@ static int mn88472_init(struct dvb_frontend *fe)
  {
  	struct i2c_client *client = fe->demodulator_priv;
  	struct mn88472_dev *dev = i2c_get_clientdata(client);
-	int ret, len, remaining;
+	int ret, i;
  	const struct firmware *fw = NULL;
  	u8 *fw_file = MN88472_FIRMWARE;

@@ -330,19 +330,12 @@ static int mn88472_init(struct dvb_frontend *fe)
  	if (ret)
  		goto err;

-	for (remaining = fw->size; remaining > 0;
-			remaining -= (dev->i2c_wr_max - 1)) {
-		len = remaining;
-		if (len > (dev->i2c_wr_max - 1))
-			len = (dev->i2c_wr_max - 1);
-
-		ret = regmap_bulk_write(dev->regmap[0], 0xf6,
-				&fw->data[fw->size - remaining], len);
-		if (ret) {
-			dev_err(&client->dev,
-					"firmware download failed=%d\n", ret);
-			goto err;
-		}
+	for (i = 0 ; i < fw->size ; i++)
+		ret |= regmap_write(dev->regmap[0], 0xf6, fw->data[i]);
+	if (ret) {
+		dev_err(&client->dev,
+				"firmware download failed=%d\n", ret);
+		goto err;
  	}

Not nice.

1) You mask status and you could not know if error code is valid after mask few thousand error codes.

2) Even worse, it is loop that runs thousand of times. Guess how much I/O errors there could happen. There is many times situation when first error occur then all the rest commands are failing too. And many cases failing I2C command could be failed USB message, which could take few seconds. Very typical USB timeout is 2 secs, this means 2k firmware, 2*2000=4000 sec => it blocks that routine over *one* hour.


  	ret = regmap_write(dev->regmap[0], 0xf5, 0x00);


regards
Antti

--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux