[PATCH] [media] gspca_touptek: Add support for ToupTek UCMOS series USB cameras

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adds support for AmScope MU800 / ToupTek UCMOS08000KPB USB microscope camera.

Signed-off-by: John McMaster <johndmcmaster@xxxxxxxxx>
---
 drivers/media/usb/gspca/Kconfig   |   10 +
 drivers/media/usb/gspca/Makefile  |    2 +
 drivers/media/usb/gspca/touptek.c |  729 +++++++++++++++++++++++++++++++++++++
 3 files changed, 741 insertions(+)
 create mode 100644 drivers/media/usb/gspca/touptek.c

diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig
index eed10d7..60af3b1 100644
--- a/drivers/media/usb/gspca/Kconfig
+++ b/drivers/media/usb/gspca/Kconfig
@@ -395,6 +395,16 @@ config USB_GSPCA_TOPRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_topro.
 
+config USB_GSPCA_TOUPTEK
+	tristate "Touptek USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for cameras based on the ToupTek UCMOS
+	  / AmScope MU series camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_touptek.
+
 config USB_GSPCA_TV8532
 	tristate "TV8532 USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/usb/gspca/Makefile b/drivers/media/usb/gspca/Makefile
index f46975e..9f5ccec 100644
--- a/drivers/media/usb/gspca/Makefile
+++ b/drivers/media/usb/gspca/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_USB_GSPCA_STK1135)  += gspca_stk1135.o
 obj-$(CONFIG_USB_GSPCA_STV0680)  += gspca_stv0680.o
 obj-$(CONFIG_USB_GSPCA_T613)     += gspca_t613.o
 obj-$(CONFIG_USB_GSPCA_TOPRO)    += gspca_topro.o
+obj-$(CONFIG_USB_GSPCA_TOUPTEK)  += gspca_touptek.o
 obj-$(CONFIG_USB_GSPCA_TV8532)   += gspca_tv8532.o
 obj-$(CONFIG_USB_GSPCA_VC032X)   += gspca_vc032x.o
 obj-$(CONFIG_USB_GSPCA_VICAM)    += gspca_vicam.o
@@ -86,6 +87,7 @@ gspca_stv0680-objs  := stv0680.o
 gspca_sunplus-objs  := sunplus.o
 gspca_t613-objs     := t613.o
 gspca_topro-objs    := topro.o
+gspca_touptek-objs  := touptek.o
 gspca_tv8532-objs   := tv8532.o
 gspca_vc032x-objs   := vc032x.o
 gspca_vicam-objs    := vicam.o
diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c
new file mode 100644
index 0000000..2fd876c
--- /dev/null
+++ b/drivers/media/usb/gspca/touptek.c
@@ -0,0 +1,729 @@
+/*
+ * ToupTek UCMOS / AmScope MU series camera driver
+ * TODO: contrast with ScopeTek / AmScope MDC cameras
+ *
+ * Copyright (C) 2012-2014 John McMaster <JohnDMcMaster@xxxxxxxxx>
+ *
+ * Special thanks to Bushing for helping with the decrypt algorithm and
+ * Sean O'Sullivan / the Rensselaer Center for Open Source
+ * Software (RCOS) for helping me learn kernel development
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "gspca.h"
+
+#define MODULE_NAME "touptek"
+
+MODULE_AUTHOR("John McMaster");
+MODULE_DESCRIPTION("ToupTek UCMOS / Amscope MU microscope camera driver");
+MODULE_LICENSE("GPL");
+
+/*
+Exposure reg is linear with exposure time
+Exposure (sec), E (reg)
+0.000400, 0x0002
+0.001000, 0x0005
+0.005000, 0x0019
+0.020000, 0x0064
+0.080000, 0x0190
+0.400000, 0x07D0
+1.000000, 0x1388
+2.000000, 0x2710
+
+Three gain stages
+0x1000: master channel enable bit
+0x007F: low gain bits
+0x0080: medium gain bit
+0x0100: high gain bit
+gain = enable * (1 + regH) * (1 + regM) * z * regL
+
+Gain implementation
+Want to do something similar to mt9v011.c's set_balance
+
+Gain does not vary with resolution (checked 640x480 vs 1600x1200)
+
+Constant derivation:
+
+Raw data:
+Gain,   GTOP,   B,	  R,	  GBOT
+1.00,   0x105C, 0x1068, 0x10C8, 0x105C
+1.20,   0x106E, 0x107E, 0x10D6, 0x106E
+1.40,   0x10C0, 0x10CA, 0x10E5, 0x10C0
+1.60,   0x10C9, 0x10D4, 0x10F3, 0x10C9
+1.80,   0x10D2, 0x10DE, 0x11C1, 0x10D2
+2.00,   0x10DC, 0x10E9, 0x11C8, 0x10DC
+2.20,   0x10E5, 0x10F3, 0x11CF, 0x10E5
+2.40,   0x10EE, 0x10FE, 0x11D7, 0x10EE
+2.60,   0x10F7, 0x11C4, 0x11DE, 0x10F7
+2.80,   0x11C0, 0x11CA, 0x11E5, 0x11C0
+3.00,   0x11C5, 0x11CF, 0x11ED, 0x11C5
+
+zR = 0.0069605943152454778
+	about 3/431 = 0.0069605568445475635
+zB = 0.0095695970695970703
+	about 6/627 = 0.0095693779904306216
+zG = 0.010889328063241107
+	about 6/551 = 0.010889292196007259
+about 10 bits for constant + 7 bits for value => at least 17 bit intermediate
+with 32 bit ints should be fine for overflow etc
+Essentially gains are in range 0-0x001FF
+
+However, V4L expects a main gain channel + R and B balance
+To keep things simple for now saturate the values of balance is too high/low
+This isn't really ideal but easy way to fit the Linux model
+
+Converted using gain model turns out to be quite linear:
+Gain, GTOP, B, R, GBOT
+1.00, 92, 104, 144, 92
+1.20, 110, 126, 172, 110
+1.40, 128, 148, 202, 128
+1.60, 146, 168, 230, 146
+1.80, 164, 188, 260, 164
+2.00, 184, 210, 288, 184
+2.20, 202, 230, 316, 202
+2.40, 220, 252, 348, 220
+2.60, 238, 272, 376, 238
+2.80, 256, 296, 404, 256
+3.00, 276, 316, 436, 276
+
+Maximum gain is 0x7FF * 2 * 2 => 0x1FFC (8188)
+or about 13 effective bits of gain
+The highest the commercial driver goes in my setup 436
+However, because could *maybe* damage circuits
+limit the gain until have a reason to go higher
+Solution: gain clipped and warning emitted
+*/
+#define GAIN_MAX		511
+
+/* Frame sync is a short read */
+#define BULK_SIZE		0x4000
+
+/* MT9E001 reg names to give a rough approximation */
+#define REG_COARSE_INTEGRATION_TIME_	0x3012
+#define REG_GROUPED_PARAMETER_HOLD_	0x3022
+#define REG_MODE_SELECT			0x0100
+#define REG_OP_SYS_CLK_DIV		0x030A
+#define REG_VT_SYS_CLK_DIV		0x0302
+#define REG_PRE_PLL_CLK_DIV		0x0304
+#define REG_VT_PIX_CLK_DIV		0x0300
+#define REG_OP_PIX_CLK_DIV		0x0308
+#define REG_PLL_MULTIPLIER		0x0306
+#define REG_COARSE_INTEGRATION_TIME_	0x3012
+#define REG_FRAME_LENGTH_LINES		0x0340
+#define REG_FRAME_LENGTH_LINES_		0x300A
+#define REG_GREEN1_GAIN			0x3056
+#define REG_GREEN2_GAIN			0x305C
+#define REG_GROUPED_PARAMETER_HOLD	0x0104
+#define REG_LINE_LENGTH_PCK_		0x300C
+#define REG_MODE_SELECT			0x0100
+#define REG_PLL_MULTIPLIER		0x0306
+#define REG_READ_MODE			0x3040
+#define REG_BLUE_GAIN			0x3058
+#define REG_RED_GAIN			0x305A
+#define REG_RESET_REGISTER		0x301A
+#define REG_SCALE_M			0x0404
+#define REG_SCALING_MODE		0x0400
+#define REG_SOFTWARE_RESET		0x0103
+#define REG_X_ADDR_END			0x0348
+#define REG_X_ADDR_START		0x0344
+#define REG_X_ADDR_START		0x0344
+#define REG_X_OUTPUT_SIZE		0x034C
+#define REG_Y_ADDR_END			0x034A
+#define REG_Y_ADDR_START		0x0346
+#define REG_Y_OUTPUT_SIZE		0x034E
+
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+	/* How many bytes this frame */
+	unsigned int this_f;
+
+	/*
+	Device has separate gains for each Bayer quadrant
+	V4L supports master gain which is referenced to G1/G2 and supplies
+	individual balance controls for R/B
+	*/
+	struct v4l2_ctrl *blue;
+	struct v4l2_ctrl *red;
+};
+
+/* Used to simplify reg write error handling */
+struct cmd {
+	u16 value;
+	u16 index;
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+	{800, 600,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.bytesperline = 800,
+		.sizeimage = 800 * 600,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+	{1600, 1200,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.bytesperline = 1600,
+		.sizeimage = 1600 * 1200,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+	{3264, 2448,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.bytesperline = 3264,
+		.sizeimage = 3264 * 2448,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+};
+
+/*
+As theres no known frame sync, the only way to keep synced is to try hard
+to never miss any packets
+*/
+#if MAX_NURBS < 4
+#error "Not enough URBs in the gspca table"
+#endif
+
+static int val_reply(struct gspca_dev *gspca_dev, const char *reply, int rc)
+{
+	if (rc < 0) {
+		PERR("reply has error %d", rc);
+		return -EIO;
+	}
+	if (rc != 1) {
+		PERR("Bad reply size %d", rc);
+		return -EIO;
+	}
+	if (reply[0] != 0x08) {
+		PERR("Bad reply 0x%02X", reply[0]);
+		return -EIO;
+	}
+	return 0;
+}
+
+static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index)
+{
+	char buff[1];
+	int rc;
+
+	PDEBUG(D_USBO, "reg_w bReq=0x0B, bReqT=0xC0, wVal=0x%04X, wInd=0x%04X\n",
+		value, index);
+	rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0),
+		0x0B, 0xC0, value, index, buff, 1, 500);
+	PDEBUG(D_USBO, "rc=%d, ret={0x%02X}", rc, buff[0]);
+	if (rc < 0) {
+		PERR("Failed reg_w(0x0B, 0xC0, 0x%04X, 0x%04X) w/ rc %d\n",
+			value, index, rc);
+		gspca_dev->usb_err = rc;
+		return;
+	}
+	if (val_reply(gspca_dev, buff, rc)) {
+		PERR("Bad reply to reg_w(0x0B, 0xC0, 0x%04X, 0x%04X\n",
+			value, index);
+		gspca_dev->usb_err = -EIO;
+	}
+}
+
+static void reg_w_buf(struct gspca_dev *gspca_dev,
+		const struct cmd *p, int l)
+{
+	do {
+		reg_w(gspca_dev, p->value, p->index);
+		p++;
+	} while (--l > 0);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+	u16 value;
+	unsigned int w = gspca_dev->pixfmt.width;
+
+	if (w == 800)
+		value = val * 5;
+	else if (w == 1600)
+		value = val * 3;
+	else if (w == 3264)
+		value = val * 3 / 2;
+	else {
+		PERR("Invalid width %u\n", w);
+		gspca_dev->usb_err = -EINVAL;
+		return;
+	}
+	PDEBUG(D_STREAM, "exposure: 0x%04X ms\n", value);
+	/* Wonder if theres a good reason for sending it twice */
+	/* probably not but leave it in because...why not */
+	reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
+	reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
+}
+
+static int gainify(int in)
+{
+	/*
+	TODO: check if there are any issues with corner cases
+	0x000 (0):0x07F (127): regL
+	0x080 (128) - 0x0FF (255): regM, regL
+	0x100 (256) - max: regH, regM, regL
+	*/
+	if (in <= 0x7F)
+		return 0x1000 | in;
+	else if (in <= 0xFF)
+		return 0x1080 | in / 2;
+	else
+		return 0x1180 | in / 4;
+}
+
+static void setggain(struct gspca_dev *gspca_dev, u16 global_gain)
+{
+	u16 normalized;
+
+	normalized = gainify(global_gain);
+	PDEBUG(D_STREAM, "gain G1/G2 (0x%04X): 0x%04X (src 0x%04X)\n",
+		 REG_GREEN1_GAIN,
+		 normalized, global_gain);
+
+	reg_w(gspca_dev, normalized, REG_GREEN1_GAIN);
+	reg_w(gspca_dev, normalized, REG_GREEN2_GAIN);
+}
+
+static void setbgain(struct gspca_dev *gspca_dev,
+		u16 gain, u16 global_gain)
+{
+	u16 normalized;
+
+	normalized = global_gain +
+		((u32)global_gain) * gain / GAIN_MAX;
+	if (normalized > GAIN_MAX) {
+		PDEBUG(D_STREAM, "Truncating blue 0x%04X w/ value 0x%04X\n",
+			 GAIN_MAX, normalized);
+		normalized = GAIN_MAX;
+	}
+	normalized = gainify(normalized);
+	PDEBUG(D_STREAM, "gain B (0x%04X): 0x%04X w/ source 0x%04X\n",
+		 REG_BLUE_GAIN, normalized, gain);
+
+	reg_w(gspca_dev, normalized, REG_BLUE_GAIN);
+}
+
+static void setrgain(struct gspca_dev *gspca_dev,
+		u16 gain, u16 global_gain)
+{
+	u16 normalized;
+
+	normalized = global_gain +
+		((u32)global_gain) * gain / GAIN_MAX;
+	if (normalized > GAIN_MAX) {
+		PDEBUG(D_STREAM, "Truncating gain 0x%04X w/ value 0x%04X\n",
+			 GAIN_MAX, normalized);
+		normalized = GAIN_MAX;
+	}
+	normalized = gainify(normalized);
+	PDEBUG(D_STREAM, "gain R (0x%04X): 0x%04X w / source 0x%04X\n",
+		 REG_RED_GAIN, normalized, gain);
+
+	reg_w(gspca_dev, normalized, REG_RED_GAIN);
+}
+
+static void configure_wh(struct gspca_dev *gspca_dev)
+{
+	unsigned int w = gspca_dev->pixfmt.width;
+
+	PDEBUG(D_STREAM, "configure_wh\n");
+
+	if (w == 800) {
+		static const struct cmd reg_init_res[] = {
+			{0x0060, REG_X_ADDR_START},
+			{0x0CD9, REG_X_ADDR_END},
+			{0x0036, REG_Y_ADDR_START},
+			{0x098F, REG_Y_ADDR_END},
+			{0x07C7, REG_READ_MODE},
+		};
+
+		reg_w_buf(gspca_dev,
+			       reg_init_res, ARRAY_SIZE(reg_init_res));
+	} else if (w == 1600) {
+		static const struct cmd reg_init_res[] = {
+			{0x009C, REG_X_ADDR_START},
+			{0x0D19, REG_X_ADDR_END},
+			{0x0068, REG_Y_ADDR_START},
+			{0x09C5, REG_Y_ADDR_END},
+			{0x06C3, REG_READ_MODE},
+		};
+
+		reg_w_buf(gspca_dev,
+			       reg_init_res, ARRAY_SIZE(reg_init_res));
+	} else if (w == 3264) {
+		static const struct cmd reg_init_res[] = {
+			{0x00E8, REG_X_ADDR_START},
+			{0x0DA7, REG_X_ADDR_END},
+			{0x009E, REG_Y_ADDR_START},
+			{0x0A2D, REG_Y_ADDR_END},
+			{0x0241, REG_READ_MODE},
+		};
+
+		reg_w_buf(gspca_dev,
+			       reg_init_res, ARRAY_SIZE(reg_init_res));
+	} else {
+		PERR("bad width %u\n", w);
+		gspca_dev->usb_err = -EINVAL;
+		return;
+	}
+
+	reg_w(gspca_dev, 0x0000, REG_SCALING_MODE);
+	reg_w(gspca_dev, 0x0010, REG_SCALE_M);
+	reg_w(gspca_dev, w, REG_X_OUTPUT_SIZE);
+	reg_w(gspca_dev, gspca_dev->pixfmt.height, REG_Y_OUTPUT_SIZE);
+
+	if (w == 800) {
+		reg_w(gspca_dev, 0x0384, REG_FRAME_LENGTH_LINES_);
+		reg_w(gspca_dev, 0x0960, REG_LINE_LENGTH_PCK_);
+	} else if (w == 1600) {
+		reg_w(gspca_dev, 0x0640, REG_FRAME_LENGTH_LINES_);
+		reg_w(gspca_dev, 0x0FA0, REG_LINE_LENGTH_PCK_);
+	} else if (w == 3264) {
+		reg_w(gspca_dev, 0x0B4B, REG_FRAME_LENGTH_LINES_);
+		reg_w(gspca_dev, 0x1F40, REG_LINE_LENGTH_PCK_);
+	} else {
+		PERR("bad width %u\n", w);
+		gspca_dev->usb_err = -EINVAL;
+		return;
+	}
+}
+
+/* Packets that were encrypted, no idea if the grouping is significant */
+static void configure_encrypted(struct gspca_dev *gspca_dev)
+{
+	static const struct cmd reg_init_begin[] = {
+		{0x0100, REG_SOFTWARE_RESET},
+		{0x0000, REG_MODE_SELECT},
+		{0x0100, REG_GROUPED_PARAMETER_HOLD},
+		{0x0004, REG_VT_PIX_CLK_DIV},
+		{0x0001, REG_VT_SYS_CLK_DIV},
+		{0x0008, REG_OP_PIX_CLK_DIV},
+		{0x0001, REG_OP_SYS_CLK_DIV},
+		{0x0004, REG_PRE_PLL_CLK_DIV},
+		{0x0040, REG_PLL_MULTIPLIER},
+		{0x0000, REG_GROUPED_PARAMETER_HOLD},
+		{0x0100, REG_GROUPED_PARAMETER_HOLD},
+	};
+	static const struct cmd reg_init_end[] = {
+		{0x0000, REG_GROUPED_PARAMETER_HOLD},
+		{0x0301, 0x31AE},
+		{0x0805, 0x3064},
+		{0x0071, 0x3170},
+		{0x10DE, REG_RESET_REGISTER},
+		{0x0000, REG_MODE_SELECT},
+		{0x0010, REG_PLL_MULTIPLIER},
+		{0x0100, REG_MODE_SELECT},
+	};
+
+	PDEBUG(D_STREAM, "Encrypted begin, w = %u\n", gspca_dev->pixfmt.width);
+	reg_w_buf(gspca_dev, reg_init_begin, ARRAY_SIZE(reg_init_begin));
+	configure_wh(gspca_dev);
+	reg_w_buf(gspca_dev, reg_init_end, ARRAY_SIZE(reg_init_end));
+	reg_w(gspca_dev, 0x0100, REG_GROUPED_PARAMETER_HOLD);
+	reg_w(gspca_dev, 0x0000, REG_GROUPED_PARAMETER_HOLD);
+
+	PDEBUG(D_STREAM, "Encrypted end\n");
+}
+
+static int configure(struct gspca_dev *gspca_dev)
+{
+	int rc;
+	uint8_t buff[4];
+
+	PDEBUG(D_STREAM, "configure()\n");
+
+	/*
+	First driver sets a sort of encryption key
+	A number of futur requests of this type have wValue and wIndex encrypted
+	as follows:
+	-Compute key = this wValue rotate left by 4 bits
+		(decrypt.py rotates right because we are decrypting)
+	-Later packets encrypt packets by XOR'ing with key
+		XOR encrypt/decrypt is symmetrical
+		wValue, and wIndex are encrypted
+		bRequest is not and bRequestType is always 0xC0
+			This allows resyncing if key is unknown?
+	By setting 0 we XOR with 0 and the shifting and XOR drops out
+	*/
+	rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0),
+			     0x16, 0xC0, 0x0000, 0x0000, buff, 2, 500);
+	if (val_reply(gspca_dev, buff, rc)) {
+		PERR("failed key req");
+		return -EIO;
+	}
+
+	/*
+	Next does some sort of 2 packet challenge / response
+	evidence suggests its an Atmel I2C crypto part but nobody cares to look
+	(to make sure its not cloned hardware?)
+	Ignore: I want to work with their hardware, not clone it
+	16 bytes out challenge, requestType: 0x40
+	16 bytes in response, requestType: 0xC0
+	*/
+
+	rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
+			     0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500);
+	if (rc < 0) {
+		PERR("failed to replay packet 176 w/ rc %d\n", rc);
+		return rc;
+	}
+
+	rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
+			     0x01, 0x40, 0x0000, 0x000F, NULL, 0, 500);
+	if (rc < 0) {
+		PERR("failed to replay packet 178 w/ rc %d\n", rc);
+		return rc;
+	}
+
+	rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
+			     0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500);
+	if (rc < 0) {
+		PERR("failed to replay packet 180 w/ rc %d\n", rc);
+		return rc;
+	}
+
+	/*
+	Serial number?  Doesn't seem to be required
+	cam1: \xE6\x0D\x00\x00, cam2: \x70\x19\x00\x00 
+	rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0),
+			     0x20, 0xC0, 0x0000, 0x0000, buff, 4, 500);
+	*/
+
+	/* Large (EEPROM?) read, skip it since no idea what to do with it */
+	gspca_dev->usb_err = 0;
+	configure_encrypted(gspca_dev);
+	if (gspca_dev->usb_err)
+		return gspca_dev->usb_err;
+
+	/* Omitted this by accident, does not work without it */
+	rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0),
+			     0x01, 0x40, 0x0003, 0x000F, NULL, 0, 500);
+
+	PDEBUG(D_STREAM, "Configure complete\n");
+	return 0;
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+		     const struct usb_device_id *id)
+{
+	gspca_dev->cam.cam_mode = vga_mode;
+	gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
+
+	/* Yes we want URBs and we want them now! */
+	gspca_dev->cam.no_urb_create = 0;
+	gspca_dev->cam.bulk_nurbs = 4;
+	/* Largest size the windows driver uses */
+	gspca_dev->cam.bulk_size = BULK_SIZE;
+	/* Def need to use bulk transfers */
+	gspca_dev->cam.bulk = 1;
+
+	return 0;
+}
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int rc;
+
+	sd->this_f = 0;
+
+	rc = configure(gspca_dev);
+	if (rc < 0) {
+		PERR("Failed configure");
+		return rc;
+	}
+	/* First two frames have messed up gains
+	Drop them to avoid special cases in user apps? */
+	return 0;
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,	/* isoc packet */
+			int len)	/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (len != BULK_SIZE) {
+		/* can we finish a frame? */
+		if (sd->this_f + len == gspca_dev->pixfmt.sizeimage) {
+			gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+			PDEBUG(D_FRAM, "finish frame sz %u/%u w/ len %u\n",
+				 sd->this_f, gspca_dev->pixfmt.sizeimage, len);
+		/* lost some data, discard the frame */
+		} else {
+			gspca_frame_add(gspca_dev, DISCARD_PACKET, NULL, 0);
+			PDEBUG(D_FRAM, "abort frame sz %u/%u w/ len %u\n",
+				 sd->this_f, gspca_dev->pixfmt.sizeimage, len);
+		}
+		sd->this_f = 0;
+	} else {
+		if (sd->this_f == 0)
+			gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+		else
+			gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+		sd->this_f += len;
+	}
+}
+
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+static int sd_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct gspca_dev *gspca_dev =
+		container_of(ctrl->handler, struct gspca_dev, ctrl_handler);
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dev->usb_err = 0;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		setexposure(gspca_dev, ctrl->val);
+		break;
+	case V4L2_CID_GAIN:
+		/* gspca_dev->gain automatically updated */
+		setggain(gspca_dev, gspca_dev->gain->val);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		sd->blue->val = ctrl->val;
+		setbgain(gspca_dev, sd->blue->val, gspca_dev->gain->val);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		sd->red->val = ctrl->val;
+		setrgain(gspca_dev, sd->red->val, gspca_dev->gain->val);
+		break;
+	}
+	return gspca_dev->usb_err;
+}
+
+static const struct v4l2_ctrl_ops sd_ctrl_ops = {
+	.s_ctrl = sd_s_ctrl,
+};
+
+static int sd_init_controls(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
+
+	gspca_dev->vdev.ctrl_handler = hdl;
+	v4l2_ctrl_handler_init(hdl, 4);
+
+	gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+	/* Mostly limited by URB timeouts */
+	/* XXX: make dynamic based on frame rate? */
+		V4L2_CID_EXPOSURE, 0, 800, 1, 350);
+	gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+			V4L2_CID_GAIN, 0, 511, 1, 128);
+	sd->blue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+			V4L2_CID_BLUE_BALANCE, 0, 1023, 1, 80);
+	sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+			V4L2_CID_RED_BALANCE, 0, 1023, 1, 295);
+
+	if (hdl->error) {
+		PERR("Could not initialize controls\n");
+		return hdl->error;
+	}
+	return 0;
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.config = sd_config,
+	.init = sd_init,
+	.init_controls = sd_init_controls,
+	.start = sd_start,
+	.pkt_scan = sd_pkt_scan,
+};
+
+/* Table of supported USB devices */
+static const struct usb_device_id device_table[] = {
+	/* Commented out devices should be related */
+	/* AS: AmScope, TT: ToupTek */
+	/* { USB_DEVICE(0x0547, 0x6035) },  TT UCMOS00350KPA */
+	/* { USB_DEVICE(0x0547, 0x6130) },  TT UCMOS01300KPA */
+	/* { USB_DEVICE(0x0547, 0x6200) },  TT UCMOS02000KPA */
+	/* { USB_DEVICE(0x0547, 0x6310) },  TT UCMOS03100KPA */
+	/* { USB_DEVICE(0x0547, 0x6510) },  TT UCMOS05100KPA */
+	/* { USB_DEVICE(0x0547, 0x6800) },  TT UCMOS08000KPA */
+	/* { USB_DEVICE(0x0547, 0x6801) },  TT UCMOS08000KPB */
+	{ USB_DEVICE(0x0547, 0x6801) }, /* TT UCMOS08000KPB, AS MU800 */
+	/* { USB_DEVICE(0x0547, 0x6900) },  TT UCMOS09000KPA */
+	/* { USB_DEVICE(0x0547, 0x6901) },  TT UCMOS09000KPB */
+	/* { USB_DEVICE(0x0547, 0x6010) },  TT UCMOS10000KPA */
+	/* { USB_DEVICE(0x0547, 0x6014) },  TT UCMOS14000KPA */
+	/* { USB_DEVICE(0x0547, 0x6131) },  TT UCMOS01300KMA */
+	/* { USB_DEVICE(0x0547, 0x6511) },  TT UCMOS05100KMA */
+	/* { USB_DEVICE(0x0547, 0x8080) },  TT UHCCD00800KPA */
+	/* { USB_DEVICE(0x0547, 0x8140) },  TT UHCCD01400KPA */
+	/* { USB_DEVICE(0x0547, 0x8141) },  TT EXCCD01400KPA */
+	/* { USB_DEVICE(0x0547, 0x8200) },  TT UHCCD02000KPA */
+	/* { USB_DEVICE(0x0547, 0x8201) },  TT UHCCD02000KPB */
+	/* { USB_DEVICE(0x0547, 0x8310) },  TT UHCCD03100KPA */
+	/* { USB_DEVICE(0x0547, 0x8500) },  TT UHCCD05000KPA */
+	/* { USB_DEVICE(0x0547, 0x8510) },  TT UHCCD05100KPA */
+	/* { USB_DEVICE(0x0547, 0x8600) },  TT UHCCD06000KPA */
+	/* { USB_DEVICE(0x0547, 0x8800) },  TT UHCCD08000KPA */
+	/* { USB_DEVICE(0x0547, 0x8315) },  TT UHCCD03150KPA */
+	/* { USB_DEVICE(0x0547, 0x7800) },  TT UHCCD00800KMA */
+	/* { USB_DEVICE(0x0547, 0x7140) },  TT UHCCD01400KMA */
+	/* { USB_DEVICE(0x0547, 0x7141) },  TT UHCCD01400KMB */
+	/* { USB_DEVICE(0x0547, 0x7200) },  TT UHCCD02000KMA */
+	/* { USB_DEVICE(0x0547, 0x7315) },  TT UHCCD03150KMA */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+static int sd_probe(struct usb_interface *intf,
+		    const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+			     THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+};
+
+static int __init sd_mod_init(void)
+{
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
+
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux