Re: [PATCH v3 0/3] drm: describe display bus format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, 18 Nov 2014 14:46:17 +0100
Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote:

> Hello,
> 
> This series makes use of the MEDIA_BUS_FMT definition to describe how
> the data are transmitted to the display.
> 
> This will allow drivers to configure their output display bus according
> to the display capabilities.
> For example some display controllers support DPI (or raw RGB) connectors
> and need to specify which format will be transmitted on the DPI bus
> (RGB444, RGB565, RGB888, ...).
> 
> This series also adds a field to the panel_desc struct so that one
> can specify which format is natevely supported by a panel.

Thierry, Laurent, Dave, can you take a look at this patch series: this
is the last missing dependency to get the atmel-hlcdc DRM driver
mainlined, and I was expecting to get this driver in 3.19...

Best Regards,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux