Hi all,
I've got an issue with ir-keytable when I try to use the -d parameter
to choose the device.
I've got one device:
olli@dl160:~$ sudo ir-keytable -v
Found device /sys/class/rc/rc0/
Input sysfs node is /sys/class/rc/rc0/input18/
Event sysfs node is /sys/class/rc/rc0/input18/event2/
Parsing uevent /sys/class/rc/rc0/input18/event2/uevent
/sys/class/rc/rc0/input18/event2/uevent uevent MAJOR=13
/sys/class/rc/rc0/input18/event2/uevent uevent MINOR=66
/sys/class/rc/rc0/input18/event2/uevent uevent DEVNAME=input/event2
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-terratec-slim-2
/sys/class/rc/rc0/uevent uevent DRV_NAME=em28xx
input device is /dev/input/event2
/sys/class/rc/rc0/protocols protocol rc-5 (disabled)
/sys/class/rc/rc0/protocols protocol nec (enabled)
/sys/class/rc/rc0/protocols protocol rc-6 (disabled)
Found /sys/class/rc/rc0/ (/dev/input/event2) with:
Driver em28xx, table rc-terratec-slim-2
Supported protocols: NEC RC-5 RC-6
Enabled protocols: NEC
Name: em28xx IR (em28178 #0)
bus: 3, vendor/product: eb1a:8179, version: 0x0001
Repeat delay = 500 ms, repeat period = 125 ms
But when I try to change the protocol using the -d parameter, I get an error:
olli@dl160:~$ sudo ir-keytable -v -p RC-6 -d /dev/input/event2
Opening /dev/input/event2
Input Protocol version: 0x00010001
Invalid protocols selected
Couldn't change the IR protocols
However, if instead of -d I use -s it works fine:
olli@dl160:~$ sudo ir-keytable -v -p RC-6 -s rc0
Found device /sys/class/rc/rc0/
Input sysfs node is /sys/class/rc/rc0/input18/
Event sysfs node is /sys/class/rc/rc0/input18/event2/
Parsing uevent /sys/class/rc/rc0/input18/event2/uevent
/sys/class/rc/rc0/input18/event2/uevent uevent MAJOR=13
/sys/class/rc/rc0/input18/event2/uevent uevent MINOR=66
/sys/class/rc/rc0/input18/event2/uevent uevent DEVNAME=input/event2
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-terratec-slim-2
/sys/class/rc/rc0/uevent uevent DRV_NAME=em28xx
input device is /dev/input/event2
/sys/class/rc/rc0/protocols protocol rc-5 (disabled)
/sys/class/rc/rc0/protocols protocol nec (enabled)
/sys/class/rc/rc0/protocols protocol rc-6 (disabled)
Opening /dev/input/event2
Input Protocol version: 0x00010001
Protocols changed to RC-6
Am I doing something daft or is there an issue?
Cheers,
-olli
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
