There is RTL2832P devices having extra MN88472 demodulator. This
patch add support for such configuration. Logically MN88472 slave
demodulator is connected to RTL2832 master demodulator, both I2C
bus and TS input. RTL2832 is integrated to RTL2832U and RTL2832P
chips. Chip version RTL2832P has extra TS interface for connecting
slave demodulator.
Signed-off-by: Antti Palosaari <crope@xxxxxx>
---
drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 143 +++++++++++++++++++++++++-------
drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 5 ++
3 files changed, 118 insertions(+), 31 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index 7423033..9050933 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -130,6 +130,7 @@ config DVB_USB_RTL28XXU
select DVB_RTL2830
select DVB_RTL2832
select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
+ select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 5ea52c7..e3c20f4 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -24,6 +24,7 @@
#include "rtl2830.h"
#include "rtl2832.h"
+#include "mn88472.h"
#include "qt1010.h"
#include "mt2060.h"
@@ -420,6 +421,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_mn88472 = {0xff38, CMD_I2C_RD, 1, buf};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
@@ -449,7 +451,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0xa1) {
priv->tuner = TUNER_RTL2832_FC0012;
priv->tuner_name = "FC0012";
- goto found;
+ goto tuner_found;
}
/* check FC0013 ID register; reg=00 val=a3 */
@@ -457,7 +459,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0xa3) {
priv->tuner = TUNER_RTL2832_FC0013;
priv->tuner_name = "FC0013";
- goto found;
+ goto tuner_found;
}
/* check MT2266 ID register; reg=00 val=85 */
@@ -465,7 +467,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x85) {
priv->tuner = TUNER_RTL2832_MT2266;
priv->tuner_name = "MT2266";
- goto found;
+ goto tuner_found;
}
/* check FC2580 ID register; reg=01 val=56 */
@@ -473,7 +475,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x56) {
priv->tuner = TUNER_RTL2832_FC2580;
priv->tuner_name = "FC2580";
- goto found;
+ goto tuner_found;
}
/* check MT2063 ID register; reg=00 val=9e || 9c */
@@ -481,7 +483,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
priv->tuner = TUNER_RTL2832_MT2063;
priv->tuner_name = "MT2063";
- goto found;
+ goto tuner_found;
}
/* check MAX3543 ID register; reg=00 val=38 */
@@ -489,7 +491,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x38) {
priv->tuner = TUNER_RTL2832_MAX3543;
priv->tuner_name = "MAX3543";
- goto found;
+ goto tuner_found;
}
/* check TUA9001 ID register; reg=7e val=2328 */
@@ -497,7 +499,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
priv->tuner = TUNER_RTL2832_TUA9001;
priv->tuner_name = "TUA9001";
- goto found;
+ goto tuner_found;
}
/* check MXL5007R ID register; reg=d9 val=14 */
@@ -505,7 +507,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x14) {
priv->tuner = TUNER_RTL2832_MXL5007T;
priv->tuner_name = "MXL5007T";
- goto found;
+ goto tuner_found;
}
/* check E4000 ID register; reg=02 val=40 */
@@ -513,7 +515,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x40) {
priv->tuner = TUNER_RTL2832_E4000;
priv->tuner_name = "E4000";
- goto found;
+ goto tuner_found;
}
/* check TDA18272 ID register; reg=00 val=c760 */
@@ -521,7 +523,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
priv->tuner = TUNER_RTL2832_TDA18272;
priv->tuner_name = "TDA18272";
- goto found;
+ goto tuner_found;
}
/* check R820T ID register; reg=00 val=69 */
@@ -529,7 +531,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x69) {
priv->tuner = TUNER_RTL2832_R820T;
priv->tuner_name = "R820T";
- goto found;
+ goto tuner_found;
}
/* check R828D ID register; reg=00 val=69 */
@@ -537,13 +539,37 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret == 0 && buf[0] == 0x69) {
priv->tuner = TUNER_RTL2832_R828D;
priv->tuner_name = "R828D";
- goto found;
+ goto tuner_found;
}
-
-found:
+tuner_found:
dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
+ /* probe slave demod */
+ if (priv->tuner == TUNER_RTL2832_R828D) {
+ /* power on MN88472 demod on GPIO0 */
+ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01);
+ if (ret)
+ goto err;
+
+ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
+ if (ret)
+ goto err;
+
+ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
+ if (ret)
+ goto err;
+
+ /* check MN88472 answers */
+ ret = rtl28xxu_ctrl_msg(d, &req_mn88472);
+ if (ret == 0 && buf[0] == 0x02) {
+ dev_dbg(&d->udev->dev, "%s: MN88472 found\n", __func__);
+ priv->slave_demod = SLAVE_DEMOD_MN88472;
+ goto demod_found;
+ }
+ }
+
+demod_found:
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret < 0)
@@ -768,6 +794,18 @@ static int rtl2832u_frontend_callback(void *adapter_priv, int component,
return 0;
}
+/* FIXME: this is a bit hackish solution */
+/* slave demod TS output is connected to master demod TS input */
+static int rtl28xxu_mn88472_init(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe_to_adap(fe);
+ struct rtl28xxu_priv *priv = fe_to_priv(fe);
+ /* enable RTL2832 PIP mode */
+ adap->fe[0]->dtv_property_cache.frequency = 0;
+ adap->fe[0]->ops.set_frontend(adap->fe[0]);
+ return priv->init(fe);
+}
+
static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
@@ -818,7 +856,48 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
/* set fe callback */
adap->fe[0]->callback = rtl2832u_frontend_callback;
+ if (priv->slave_demod) {
+ struct i2c_board_info info = {};
+ struct i2c_client *client;
+
+ /*
+ * We continue on reduced mode, without DVB-T2/C, using master
+ * demod, when slave demod fails.
+ */
+ ret = 0;
+
+ /* attach slave demodulator */
+ if (priv->slave_demod == SLAVE_DEMOD_MN88472) {
+ struct mn88472_config mn88472_config = {};
+
+ mn88472_config.fe = &adap->fe[1];
+ mn88472_config.i2c_wr_max = 22,
+ strlcpy(info.type, "mn88472", I2C_NAME_SIZE);
+ info.addr = 0x18;
+ info.platform_data = &mn88472_config;
+ request_module(info.type);
+ client = i2c_new_device(priv->demod_i2c_adapter, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ priv->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ priv->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+
+ priv->i2c_client_slave_demod = client;
+ }
+
+ /* override init as we want configure RTL2832 as TS input */
+ priv->init = adap->fe[1]->ops.init;
+ adap->fe[1]->ops.init = rtl28xxu_mn88472_init;
+ }
+
return 0;
+err_slave_demod_failed:
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
@@ -1024,25 +1103,19 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
&rtl28xxu_rtl2832_r820t_config, NULL);
break;
case TUNER_RTL2832_R828D:
- /* power off mn88472 demod on GPIO0 */
- ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x00, 0x01);
- if (ret)
- goto err;
-
- ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
- if (ret)
- goto err;
-
- ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
- if (ret)
- goto err;
-
- fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap,
+ fe = dvb_attach(r820t_attach, adap->fe[0],
+ priv->demod_i2c_adapter,
&rtl2832u_r828d_config);
-
- /* Use tuner to get the signal strength */
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
+
+ if (adap->fe[1]) {
+ fe = dvb_attach(r820t_attach, adap->fe[1],
+ priv->demod_i2c_adapter,
+ &rtl2832u_r828d_config);
+ adap->fe[1]->ops.read_signal_strength =
+ adap->fe[1]->ops.tuner_ops.get_rf_strength;
+ }
break;
default:
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
@@ -1097,11 +1170,19 @@ err:
static void rtl28xxu_exit(struct dvb_usb_device *d)
{
struct rtl28xxu_priv *priv = d->priv;
- struct i2c_client *client = priv->client;
+ struct i2c_client *client;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* remove I2C tuner */
+ client = priv->client;
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+
+ /* remove I2C slave demod */
+ client = priv->i2c_client_slave_demod;
if (client) {
module_put(client->dev.driver->owner);
i2c_unregister_device(client);
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
index a26cab1..58f2730 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
@@ -58,6 +58,11 @@ struct rtl28xxu_priv {
struct i2c_adapter *demod_i2c_adapter;
bool rc_active;
struct i2c_client *client;
+ struct i2c_client *i2c_client_slave_demod;
+ int (*init)(struct dvb_frontend *fe);
+ #define SLAVE_DEMOD_NONE 0
+ #define SLAVE_DEMOD_MN88472 1
+ unsigned int slave_demod:1;
};
enum rtl28xxu_chip_id {
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
