Re: [PATCH] vb2: replace VIDEO_MAX_FRAME with VB2_MAX_FRAME

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/28/2014 07:26 PM, Mauro Carvalho Chehab wrote:
> Em Fri, 10 Oct 2014 10:04:58 +0200
> Hans Verkuil <hverkuil@xxxxxxxxx> escreveu:
> 
>> (This patch is from Divneil except for the vivid changes which I added. He had
>> difficulties posting the patch without the mailer mangling it, so I'm reposting
>> it for him)
>>
>> - vb2 drivers to rely on VB2_MAX_FRAME.
>>
>> - VB2_MAX_FRAME bumps the value to 64 from current 32
> 
> Hmm... what's the point of announcing a maximum of 32 buffers to userspace,
> but using internally 64?

Where do we announce 32 buffers? The only place where a maximum is enforced is
in REQBUFS/CREATE_BUFS. Most (all?) vb2 drivers leave enforcing the maximum to
vb2, they only care about the minimum, so they will automatically use the new
maximum.

> 
> Btw, wouldn't this change break for DaVinci:
> 	include/media/davinci/vpfe_capture.h:   u8 *fbuffers[VIDEO_MAX_FRAME];

That driver still uses vb1, so this patch won't break it.

Regards,

	Hans

> 
> Regards,
> Mauro
> 
>>
>> Signed-off-by: Divneil Wadhawan <divneil.wadhawan@xxxxxx>
>> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>> ---
>>   drivers/media/pci/saa7134/saa7134-ts.c       | 4 ++--
>>   drivers/media/pci/saa7134/saa7134-vbi.c      | 4 ++--
>>   drivers/media/pci/saa7134/saa7134-video.c    | 2 +-
>>   drivers/media/platform/mem2mem_testdev.c     | 2 +-
>>   drivers/media/platform/ti-vpe/vpe.c          | 2 +-
>>   drivers/media/platform/vivid/vivid-core.h    | 2 +-
>>   drivers/media/platform/vivid/vivid-ctrls.c   | 2 +-
>>   drivers/media/platform/vivid/vivid-vid-cap.c | 2 +-
>>   drivers/media/v4l2-core/videobuf2-core.c     | 8 ++++----
>>   include/media/videobuf2-core.h               | 4 +++-
>>   10 files changed, 17 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/media/pci/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c
>> index bd25323..0d04995 100644
>> --- a/drivers/media/pci/saa7134/saa7134-ts.c
>> +++ b/drivers/media/pci/saa7134/saa7134-ts.c
>> @@ -227,8 +227,8 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
>>   	/* sanitycheck insmod options */
>>   	if (tsbufs < 2)
>>   		tsbufs = 2;
>> -	if (tsbufs > VIDEO_MAX_FRAME)
>> -		tsbufs = VIDEO_MAX_FRAME;
>> +	if (tsbufs > VB2_MAX_FRAME)
>> +		tsbufs = VB2_MAX_FRAME;
>>   	if (ts_nr_packets < 4)
>>   		ts_nr_packets = 4;
>>   	if (ts_nr_packets > 312)
>> diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c
>> index 4f0b101..2269837 100644
>> --- a/drivers/media/pci/saa7134/saa7134-vbi.c
>> +++ b/drivers/media/pci/saa7134/saa7134-vbi.c
>> @@ -203,8 +203,8 @@ int saa7134_vbi_init1(struct saa7134_dev *dev)
>>   
>>   	if (vbibufs < 2)
>>   		vbibufs = 2;
>> -	if (vbibufs > VIDEO_MAX_FRAME)
>> -		vbibufs = VIDEO_MAX_FRAME;
>> +	if (vbibufs > VB2_MAX_FRAME)
>> +		vbibufs = VB2_MAX_FRAME;
>>   	return 0;
>>   }
>>   
>> diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c
>> index fc4a427..c7f39be 100644
>> --- a/drivers/media/pci/saa7134/saa7134-video.c
>> +++ b/drivers/media/pci/saa7134/saa7134-video.c
>> @@ -2030,7 +2030,7 @@ int saa7134_video_init1(struct saa7134_dev *dev)
>>   	int ret;
>>   
>>   	/* sanitycheck insmod options */
>> -	if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
>> +	if (gbuffers < 2 || gbuffers > VB2_MAX_FRAME)
>>   		gbuffers = 2;
>>   	if (gbufsize > gbufsize_max)
>>   		gbufsize = gbufsize_max;
>> diff --git a/drivers/media/platform/mem2mem_testdev.c b/drivers/media/platform/mem2mem_testdev.c
>> index c1b03cf..e1ff7e0 100644
>> --- a/drivers/media/platform/mem2mem_testdev.c
>> +++ b/drivers/media/platform/mem2mem_testdev.c
>> @@ -55,7 +55,7 @@ MODULE_PARM_DESC(debug, "activates debug info");
>>   #define MEM2MEM_NAME		"m2m-testdev"
>>   
>>   /* Per queue */
>> -#define MEM2MEM_DEF_NUM_BUFS	VIDEO_MAX_FRAME
>> +#define MEM2MEM_DEF_NUM_BUFS	VB2_MAX_FRAME
>>   /* In bytes, per queue */
>>   #define MEM2MEM_VID_MEM_LIMIT	(16 * 1024 * 1024)
>>   
>> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
>> index 9a081c2..04e37c0 100644
>> --- a/drivers/media/platform/ti-vpe/vpe.c
>> +++ b/drivers/media/platform/ti-vpe/vpe.c
>> @@ -1971,7 +1971,7 @@ static const struct v4l2_ctrl_config vpe_bufs_per_job = {
>>   	.type = V4L2_CTRL_TYPE_INTEGER,
>>   	.def = VPE_DEF_BUFS_PER_JOB,
>>   	.min = 1,
>> -	.max = VIDEO_MAX_FRAME,
>> +	.max = VB2_MAX_FRAME,
>>   	.step = 1,
>>   };
>>   
>> diff --git a/drivers/media/platform/vivid/vivid-core.h b/drivers/media/platform/vivid/vivid-core.h
>> index 811c286..c0375a1 100644
>> --- a/drivers/media/platform/vivid/vivid-core.h
>> +++ b/drivers/media/platform/vivid/vivid-core.h
>> @@ -346,7 +346,7 @@ struct vivid_dev {
>>   	/* video capture */
>>   	struct tpg_data			tpg;
>>   	unsigned			ms_vid_cap;
>> -	bool				must_blank[VIDEO_MAX_FRAME];
>> +	bool				must_blank[VB2_MAX_FRAME];
>>   
>>   	const struct vivid_fmt		*fmt_cap;
>>   	struct v4l2_fract		timeperframe_vid_cap;
>> diff --git a/drivers/media/platform/vivid/vivid-ctrls.c b/drivers/media/platform/vivid/vivid-ctrls.c
>> index d5cbf00..7162f97 100644
>> --- a/drivers/media/platform/vivid/vivid-ctrls.c
>> +++ b/drivers/media/platform/vivid/vivid-ctrls.c
>> @@ -332,7 +332,7 @@ static int vivid_vid_cap_s_ctrl(struct v4l2_ctrl *ctrl)
>>   		break;
>>   	case VIVID_CID_PERCENTAGE_FILL:
>>   		tpg_s_perc_fill(&dev->tpg, ctrl->val);
>> -		for (i = 0; i < VIDEO_MAX_FRAME; i++)
>> +		for (i = 0; i < VB2_MAX_FRAME; i++)
>>   			dev->must_blank[i] = ctrl->val < 100;
>>   		break;
>>   	case VIVID_CID_INSERT_SAV:
>> diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c
>> index 331c544..55e8158 100644
>> --- a/drivers/media/platform/vivid/vivid-vid-cap.c
>> +++ b/drivers/media/platform/vivid/vivid-vid-cap.c
>> @@ -252,7 +252,7 @@ static int vid_cap_start_streaming(struct vb2_queue *vq, unsigned count)
>>   
>>   	dev->vid_cap_seq_count = 0;
>>   	dprintk(dev, 1, "%s\n", __func__);
>> -	for (i = 0; i < VIDEO_MAX_FRAME; i++)
>> +	for (i = 0; i < VB2_MAX_FRAME; i++)
>>   		dev->must_blank[i] = tpg_g_perc_fill(&dev->tpg) < 100;
>>   	if (dev->start_streaming_error) {
>>   		dev->start_streaming_error = false;
>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>> index 15b02f9..60354b4 100644
>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>> @@ -911,7 +911,7 @@ static int __reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
>>   	/*
>>   	 * Make sure the requested values and current defaults are sane.
>>   	 */
>> -	num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME);
>> +	num_buffers = min_t(unsigned int, req->count, VB2_MAX_FRAME);
>>   	num_buffers = max_t(unsigned int, num_buffers, q->min_buffers_needed);
>>   	memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
>>   	memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
>> @@ -1015,7 +1015,7 @@ static int __create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create
>>   	unsigned int num_planes = 0, num_buffers, allocated_buffers;
>>   	int ret;
>>   
>> -	if (q->num_buffers == VIDEO_MAX_FRAME) {
>> +	if (q->num_buffers == VB2_MAX_FRAME) {
>>   		dprintk(1, "maximum number of buffers already allocated\n");
>>   		return -ENOBUFS;
>>   	}
>> @@ -1026,7 +1026,7 @@ static int __create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create
>>   		q->memory = create->memory;
>>   	}
>>   
>> -	num_buffers = min(create->count, VIDEO_MAX_FRAME - q->num_buffers);
>> +	num_buffers = min(create->count, VB2_MAX_FRAME - q->num_buffers);
>>   
>>   	/*
>>   	 * Ask the driver, whether the requested number of buffers, planes per
>> @@ -2725,7 +2725,7 @@ struct vb2_fileio_data {
>>   	struct v4l2_requestbuffers req;
>>   	struct v4l2_plane p;
>>   	struct v4l2_buffer b;
>> -	struct vb2_fileio_buf bufs[VIDEO_MAX_FRAME];
>> +	struct vb2_fileio_buf bufs[VB2_MAX_FRAME];
>>   	unsigned int cur_index;
>>   	unsigned int initial_index;
>>   	unsigned int q_count;
>> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
>> index a8608ce..66dcc40 100644
>> --- a/include/media/videobuf2-core.h
>> +++ b/include/media/videobuf2-core.h
>> @@ -18,6 +18,8 @@
>>   #include <linux/videodev2.h>
>>   #include <linux/dma-buf.h>
>>   
>> +#define VB2_MAX_FRAME		64
>> +
>>   struct vb2_alloc_ctx;
>>   struct vb2_fileio_data;
>>   struct vb2_threadio_data;
>> @@ -402,7 +404,7 @@ struct vb2_queue {
>>   /* private: internal use only */
>>   	struct mutex			mmap_lock;
>>   	enum v4l2_memory		memory;
>> -	struct vb2_buffer		*bufs[VIDEO_MAX_FRAME];
>> +	struct vb2_buffer		*bufs[VB2_MAX_FRAME];
>>   	unsigned int			num_buffers;
>>   
>>   	struct list_head		queued_list;

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux