Hi Jean-Michel,
Thank you for the patch.
On Wednesday 22 October 2014 17:30:47 Jean-Michel Hautbois wrote:
> Some I2C devices have multiple addresses assigned, for example each address
> corresponding to a different internal register map page of the device.
> So far drivers which need support for this have handled this with a driver
> specific and non-generic implementation, e.g. passing the additional address
> via platform data.
>
> This patch provides a new helper function called i2c_new_secondary_device()
> which is intended to provide a generic way to get the secondary address
> as well as instantiate a struct i2c_client for the secondary address.
>
> The function expects a pointer to the primary i2c_client, a name
> for the secondary address and an optional default address. The name is used
> as a handle to specify which secondary address to get.
>
> The default address is used as a fallback in case no secondary address
> was explicitly specified. In case no secondary address and no default
> address were specified the function returns NULL.
>
> For now the function only supports look-up of the secondary address
> from devicetree, but it can be extended in the future
> to for example support board files and/or ACPI.
As this is core code I believe the DT bindings should be documented somewhere
in Documentation/devicetree/bindings/i2c/.
> Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
> ---
> drivers/i2c/i2c-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c.h | 8 ++++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index 2f90ac6..fd3b07c 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -1166,6 +1166,46 @@ struct i2c_client *i2c_new_dummy(struct i2c_adapter
> *adapter, u16 address) }
> EXPORT_SYMBOL_GPL(i2c_new_dummy);
>
> +/**
> + * i2c_new_secondary_device - Helper to get the instantiated secondary
> address
It does more than that, it also creates the device.
> + * @client: Handle to the primary client
> + * @name: Handle to specify which secondary address to get
> + * @default_addr: Used as a fallback if no secondary address was specified
> + * Context: can sleep
> + *
> + * This returns an I2C client bound to the "dummy" driver based on DT
> parsing.
Could you elaborate on that ? I would explain that the address is retrieved
from the firmware based on the name, and that default_addr is used in case the
firmware doesn't provide any information.
> + *
> + * This returns the new i2c client, which should be saved for later use
> with
> + * i2c_unregister_device(); or NULL to indicate an error.
> + */
> +struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
> + const char *name,
> + u16 default_addr)
> +{
> + int i;
> + u32 addr;
> + struct device_node *np;
> +
> + np = client->dev.of_node;
> +
> + if (np) {
> + i = of_property_match_string(np, "reg-names", name);
> + if (i >= 0)
> + of_property_read_u32_index(np, "reg", i, &addr);
This call could fail in which case addr will be uninitialized.
> + else if (default_addr != 0)
> + addr = default_addr;
> + else
> + addr = NULL;
addr isn't a pointer. I'm surprised the compiler hasn't warned you.
> + } else {
> + addr = default_addr;
> + }
The whole logic can be simplified to
struct device_node *np = client->dev.of_node;
u32 addr = default_addr;
int i;
if (np) {
i = of_property_match_string(np, "reg-names", name);
if (i >= 0)
of_property_read_u32_index(np, "reg", i, &addr);
}
> +
> + dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
> + return i2c_new_dummy(client->adapter, addr);
> +}
> +EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
> +
> +
> /*
> -------------------------------------------------------------------------
> */
>
> /* I2C bus adapters -- one roots each I2C or SMBUS segment */
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index b556e0a..8629287 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -322,6 +322,14 @@ extern int i2c_probe_func_quick_read(struct i2c_adapter
> *, unsigned short addr); extern struct i2c_client *
> i2c_new_dummy(struct i2c_adapter *adap, u16 address);
>
> +/* Helper function providing a generic way to get the secondary address
> + * as well as a client handle to this extra address.
> + */
The function is already documented in i2c-core.c, I would ditch this comment.
> +extern struct i2c_client *
> +i2c_new_secondary_device(struct i2c_client *client,
> + const char *name,
> + u16 default_addr);
> +
> extern void i2c_unregister_device(struct i2c_client *);
> #endif /* I2C */
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
