From: Kiran AVND <avnd.kiran@xxxxxxxxxxx>
during reset sequence, it is advisable to follow the below
sequence, in order to avoid unexpected behavior from MFC
. set SFR 0x7110 MFC_BUS_RESET_CTRL 0x1
// wait for REQ_STATUS to be 1
. get SFR 0x7110 MFC_BUS_RESET_CTRL 0x3
// reset now
Signed-off-by: Kiran AVND <avnd.kiran@xxxxxxxxxxx>
Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
---
drivers/media/platform/s5p-mfc/regs-mfc-v6.h | 1 +
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 25 ++++++++++++++++++++++++-
2 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h
index 51cb2dd..83e01f3 100644
--- a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h
+++ b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h
@@ -71,6 +71,7 @@
#define S5P_FIMV_R2H_CMD_ENC_BUFFER_FUL_RET_V6 16
#define S5P_FIMV_R2H_CMD_ERR_RET_V6 32
+#define S5P_FIMV_MFC_BUS_RESET_CTRL 0x7110
#define S5P_FIMV_FW_VERSION_V6 0xf000
#define S5P_FIMV_INSTANCE_ID_V6 0xf008
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index f5bb6b2..0d3661b 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -129,6 +129,25 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
return 0;
}
+int s5p_mfc_bus_reset(struct s5p_mfc_dev *dev)
+{
+ unsigned int status;
+ unsigned long timeout;
+
+ /* Reset */
+ mfc_write(dev, 0x1, S5P_FIMV_MFC_BUS_RESET_CTRL);
+ timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
+ /* Check bus status */
+ do {
+ if (time_after(jiffies, timeout)) {
+ mfc_err("Timeout while resetting MFC.\n");
+ return -EIO;
+ }
+ status = mfc_read(dev, S5P_FIMV_MFC_BUS_RESET_CTRL);
+ } while ((status & 0x2) == 0);
+ return 0;
+}
+
/* Reset the device */
int s5p_mfc_reset(struct s5p_mfc_dev *dev)
{
@@ -147,11 +166,15 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev)
for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++)
mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4));
+ /* check bus reset control before reset */
+ if (dev->risc_on)
+ if (s5p_mfc_bus_reset(dev))
+ return -EIO;
/* Reset
* set RISC_ON to 0 during power_on & wake_up.
* V6 needs RISC_ON set to 0 during reset also.
*/
- if ((!dev->risc_on) || (!IS_MFCV7(dev)))
+ if ((!dev->risc_on) || (!IS_MFCV7_PLUS(dev)))
mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
