Hi, this is a driver for the IR receiver available in Amlogic Meson6 and Meson8 SoCs. The device can operate in two modes: in "NEC" mode the hardware can decode frames using the NEC IR protocol, while in "general" mode the receiver simply reports the duration of pulses and spaces for software decoding. In order to have the maximum compatibility with different protocols the driver implements software decoding. The third patch (dts files) depends on some other patchsets [1][2] that are still under review, so at the moment is not meant to be merged. [1] https://lkml.org/lkml/2014/10/5/162 [2] https://lkml.org/lkml/2014/10/7/712 Beniamino Galvani (3): media: rc: add driver for Amlogic Meson IR remote receiver media: rc: meson: document device tree bindings ARM: dts: meson: add dts nodes for IR receiver .../devicetree/bindings/media/meson-ir.txt | 14 ++ arch/arm/boot/dts/meson.dtsi | 7 + arch/arm/boot/dts/meson8-vega-s89e.dts | 6 + arch/arm/boot/dts/meson8.dtsi | 7 + drivers/media/rc/Kconfig | 11 ++ drivers/media/rc/Makefile | 1 + drivers/media/rc/meson-ir.c | 214 +++++++++++++++++++++ 7 files changed, 260 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/meson-ir.txt create mode 100644 drivers/media/rc/meson-ir.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
