This is a preparation for deleting the otherwise useless i2c_clients
that are allocated for all the i2c master adapters.
Signed-off-by: Matthias Schwarzott <zzam@xxxxxxxxxx>
Reviewed-by: Antti Palosaari <crope@xxxxxx>
---
drivers/media/usb/cx231xx/cx231xx-cards.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 791f00c..092fb85 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -980,23 +980,20 @@ static void cx231xx_config_tuner(struct cx231xx *dev)
}
-static int read_eeprom(struct cx231xx *dev, u8 *eedata, int len)
+static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
+ u8 *eedata, int len)
{
int ret = 0;
- u8 addr = 0xa0 >> 1;
u8 start_offset = 0;
int len_todo = len;
u8 *eedata_cur = eedata;
int i;
- struct i2c_msg msg_write = { .addr = addr, .flags = 0,
+ struct i2c_msg msg_write = { .addr = client->addr, .flags = 0,
.buf = &start_offset, .len = 1 };
- struct i2c_msg msg_read = { .addr = addr, .flags = I2C_M_RD };
-
- /* mutex_lock(&dev->i2c_lock); */
- cx231xx_enable_i2c_port_3(dev, false);
+ struct i2c_msg msg_read = { .addr = client->addr, .flags = I2C_M_RD };
/* start reading at offset 0 */
- ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_write, 1);
+ ret = i2c_transfer(client->adapter, &msg_write, 1);
if (ret < 0) {
cx231xx_err("Can't read eeprom\n");
return ret;
@@ -1006,7 +1003,7 @@ static int read_eeprom(struct cx231xx *dev, u8 *eedata, int len)
msg_read.len = (len_todo > 64) ? 64 : len_todo;
msg_read.buf = eedata_cur;
- ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_read, 1);
+ ret = i2c_transfer(client->adapter, &msg_read, 1);
if (ret < 0) {
cx231xx_err("Can't read eeprom\n");
return ret;
@@ -1062,9 +1059,14 @@ void cx231xx_card_setup(struct cx231xx *dev)
{
struct tveeprom tvee;
static u8 eeprom[256];
+ struct i2c_client client;
+
+ memset(&client, 0, sizeof(client));
+ client.adapter = &dev->i2c_bus[1].i2c_adap;
+ client.addr = 0xa0 >> 1;
- read_eeprom(dev, eeprom, sizeof(eeprom));
- tveeprom_hauppauge_analog(&dev->i2c_bus[1].i2c_client,
+ read_eeprom(dev, &client, eeprom, sizeof(eeprom));
+ tveeprom_hauppauge_analog(&client,
&tvee, eeprom + 0xc0);
break;
}
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
