This comment is already at the au0828-i2c where it belongs.
So, remove it from a board's entry. It doesn't make any sense
there, as we're setting the clock to 250kHz there, slowing it
down only at the au0828-i2c.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c
index d229c6dbddb9..585a8f84228c 100644
--- a/drivers/media/usb/au0828/au0828-cards.c
+++ b/drivers/media/usb/au0828/au0828-cards.c
@@ -73,12 +73,6 @@ struct au0828_board au0828_boards[] = {
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.has_ir_i2c = 1,
- /* The au0828 hardware i2c implementation does not properly
- support the xc5000's i2c clock stretching. So we need to
- lower the clock frequency enough where the 15us clock
- stretch fits inside of a normal clock cycle, or else the
- au0828 fails to set the STOP bit. A 30 KHz clock puts the
- clock pulse width at 18us */
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
.input = {
{
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
