From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
These values are unsigned, so use %u instead of %d.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/smiapp-pll.c | 94 ++++++++++++++++++++--------------------
1 file changed, 47 insertions(+), 47 deletions(-)
diff --git a/drivers/media/i2c/smiapp-pll.c b/drivers/media/i2c/smiapp-pll.c
index ab5d9a3..d14af5c 100644
--- a/drivers/media/i2c/smiapp-pll.c
+++ b/drivers/media/i2c/smiapp-pll.c
@@ -65,26 +65,26 @@ static int bounds_check(struct device *dev, uint32_t val,
static void print_pll(struct device *dev, struct smiapp_pll *pll)
{
- dev_dbg(dev, "pre_pll_clk_div\t%d\n", pll->pre_pll_clk_div);
- dev_dbg(dev, "pll_multiplier \t%d\n", pll->pll_multiplier);
+ dev_dbg(dev, "pre_pll_clk_div\t%u\n", pll->pre_pll_clk_div);
+ dev_dbg(dev, "pll_multiplier \t%u\n", pll->pll_multiplier);
if (!(pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS)) {
- dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div);
- dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div);
+ dev_dbg(dev, "op_sys_clk_div \t%u\n", pll->op_sys_clk_div);
+ dev_dbg(dev, "op_pix_clk_div \t%u\n", pll->op_pix_clk_div);
}
- dev_dbg(dev, "vt_sys_clk_div \t%d\n", pll->vt_sys_clk_div);
- dev_dbg(dev, "vt_pix_clk_div \t%d\n", pll->vt_pix_clk_div);
+ dev_dbg(dev, "vt_sys_clk_div \t%u\n", pll->vt_sys_clk_div);
+ dev_dbg(dev, "vt_pix_clk_div \t%u\n", pll->vt_pix_clk_div);
- dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz);
- dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz);
- dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz);
+ dev_dbg(dev, "ext_clk_freq_hz \t%u\n", pll->ext_clk_freq_hz);
+ dev_dbg(dev, "pll_ip_clk_freq_hz \t%u\n", pll->pll_ip_clk_freq_hz);
+ dev_dbg(dev, "pll_op_clk_freq_hz \t%u\n", pll->pll_op_clk_freq_hz);
if (!(pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS)) {
- dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n",
+ dev_dbg(dev, "op_sys_clk_freq_hz \t%u\n",
pll->op_sys_clk_freq_hz);
- dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n",
+ dev_dbg(dev, "op_pix_clk_freq_hz \t%u\n",
pll->op_pix_clk_freq_hz);
}
- dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz);
- dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
+ dev_dbg(dev, "vt_sys_clk_freq_hz \t%u\n", pll->vt_sys_clk_freq_hz);
+ dev_dbg(dev, "vt_pix_clk_freq_hz \t%u\n", pll->vt_pix_clk_freq_hz);
}
/*
@@ -123,11 +123,11 @@ static int __smiapp_pll_calculate(struct device *dev,
* Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
* too high.
*/
- dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div);
+ dev_dbg(dev, "pre_pll_clk_div %u\n", pll->pre_pll_clk_div);
/* Don't go above max pll multiplier. */
more_mul_max = limits->max_pll_multiplier / mul;
- dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n",
+ dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %u\n",
more_mul_max);
/* Don't go above max pll op frequency. */
more_mul_max =
@@ -135,30 +135,30 @@ static int __smiapp_pll_calculate(struct device *dev,
more_mul_max,
limits->max_pll_op_freq_hz
/ (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
- dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n",
+ dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %u\n",
more_mul_max);
/* Don't go above the division capability of op sys clock divider. */
more_mul_max = min(more_mul_max,
limits->op.max_sys_clk_div * pll->pre_pll_clk_div
/ div);
- dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
+ dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %u\n",
more_mul_max);
/* Ensure we won't go above min_pll_multiplier. */
more_mul_max = min(more_mul_max,
DIV_ROUND_UP(limits->max_pll_multiplier, mul));
- dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n",
+ dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %u\n",
more_mul_max);
/* Ensure we won't go below min_pll_op_freq_hz. */
more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz,
pll->ext_clk_freq_hz / pll->pre_pll_clk_div
* mul);
- dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n",
+ dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %u\n",
more_mul_min);
/* Ensure we won't go below min_pll_multiplier. */
more_mul_min = max(more_mul_min,
DIV_ROUND_UP(limits->min_pll_multiplier, mul));
- dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n",
+ dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %u\n",
more_mul_min);
if (more_mul_min > more_mul_max) {
@@ -168,23 +168,23 @@ static int __smiapp_pll_calculate(struct device *dev,
}
more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
- dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
+ dev_dbg(dev, "more_mul_factor: %u\n", more_mul_factor);
more_mul_factor = lcm(more_mul_factor, limits->op.min_sys_clk_div);
- dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
+ dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %u\n",
more_mul_factor);
i = roundup(more_mul_min, more_mul_factor);
if (!is_one_or_even(i))
i <<= 1;
- dev_dbg(dev, "final more_mul: %d\n", i);
+ dev_dbg(dev, "final more_mul: %u\n", i);
if (i > more_mul_max) {
- dev_dbg(dev, "final more_mul is bad, max %d\n", more_mul_max);
+ dev_dbg(dev, "final more_mul is bad, max %u\n", more_mul_max);
return -EINVAL;
}
pll->pll_multiplier = mul * i;
pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div;
- dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div);
+ dev_dbg(dev, "op_sys_clk_div: %u\n", pll->op_sys_clk_div);
pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
/ pll->pre_pll_clk_div;
@@ -197,7 +197,7 @@ static int __smiapp_pll_calculate(struct device *dev,
pll->pll_op_clk_freq_hz / pll->op_sys_clk_div;
pll->op_pix_clk_div = pll->bits_per_pixel;
- dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div);
+ dev_dbg(dev, "op_pix_clk_div: %u\n", pll->op_pix_clk_div);
pll->op_pix_clk_freq_hz =
pll->op_sys_clk_freq_hz / pll->op_pix_clk_div;
@@ -214,7 +214,7 @@ static int __smiapp_pll_calculate(struct device *dev,
vt_op_binning_div = pll->binning_horizontal;
else
vt_op_binning_div = 1;
- dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
+ dev_dbg(dev, "vt_op_binning_div: %u\n", vt_op_binning_div);
/*
* Profile 2 supports vt_pix_clk_div E [4, 10]
@@ -227,30 +227,30 @@ static int __smiapp_pll_calculate(struct device *dev,
*
* Find absolute limits for the factor of vt divider.
*/
- dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
+ dev_dbg(dev, "scale_m: %u\n", pll->scale_m);
min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
* pll->scale_n,
lane_op_clock_ratio * vt_op_binning_div
* pll->scale_m);
/* Find smallest and biggest allowed vt divisor. */
- dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
+ dev_dbg(dev, "min_vt_div: %u\n", min_vt_div);
min_vt_div = max(min_vt_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->vt.max_pix_clk_freq_hz));
- dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
+ dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %u\n",
min_vt_div);
min_vt_div = max_t(uint32_t, min_vt_div,
limits->vt.min_pix_clk_div
* limits->vt.min_sys_clk_div);
- dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
+ dev_dbg(dev, "min_vt_div: min_vt_clk_div: %u\n", min_vt_div);
max_vt_div = limits->vt.max_sys_clk_div * limits->vt.max_pix_clk_div;
- dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
+ dev_dbg(dev, "max_vt_div: %u\n", max_vt_div);
max_vt_div = min(max_vt_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->vt.min_pix_clk_freq_hz));
- dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
+ dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %u\n",
max_vt_div);
/*
@@ -258,28 +258,28 @@ static int __smiapp_pll_calculate(struct device *dev,
* with all values of pix_clk_div.
*/
min_sys_div = limits->vt.min_sys_clk_div;
- dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
+ dev_dbg(dev, "min_sys_div: %u\n", min_sys_div);
min_sys_div = max(min_sys_div,
DIV_ROUND_UP(min_vt_div,
limits->vt.max_pix_clk_div));
- dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
+ dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %u\n", min_sys_div);
min_sys_div = max(min_sys_div,
pll->pll_op_clk_freq_hz
/ limits->vt.max_sys_clk_freq_hz);
- dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
+ dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %u\n", min_sys_div);
min_sys_div = clk_div_even_up(min_sys_div);
- dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
+ dev_dbg(dev, "min_sys_div: one or even: %u\n", min_sys_div);
max_sys_div = limits->vt.max_sys_clk_div;
- dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
+ dev_dbg(dev, "max_sys_div: %u\n", max_sys_div);
max_sys_div = min(max_sys_div,
DIV_ROUND_UP(max_vt_div,
limits->vt.min_pix_clk_div));
- dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
+ dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %u\n", max_sys_div);
max_sys_div = min(max_sys_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->vt.min_pix_clk_freq_hz));
- dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
+ dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %u\n", max_sys_div);
/*
* Find pix_div such that a legal pix_div * sys_div results
@@ -296,7 +296,7 @@ static int __smiapp_pll_calculate(struct device *dev,
if (pix_div < limits->vt.min_pix_clk_div
|| pix_div > limits->vt.max_pix_clk_div) {
dev_dbg(dev,
- "pix_div %d too small or too big (%d--%d)\n",
+ "pix_div %u too small or too big (%u--%u)\n",
pix_div,
limits->vt.min_pix_clk_div,
limits->vt.max_pix_clk_div);
@@ -390,9 +390,9 @@ int smiapp_pll_calculate(struct device *dev,
lane_op_clock_ratio = pll->csi2.lanes;
else
lane_op_clock_ratio = 1;
- dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
+ dev_dbg(dev, "lane_op_clock_ratio: %u\n", lane_op_clock_ratio);
- dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
+ dev_dbg(dev, "binning: %ux%u\n", pll->binning_horizontal,
pll->binning_vertical);
switch (pll->bus_type) {
@@ -411,7 +411,7 @@ int smiapp_pll_calculate(struct device *dev,
}
/* Figure out limits for pre-pll divider based on extclk */
- dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
+ dev_dbg(dev, "min / max pre_pll_clk_div: %u / %u\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
max_pre_pll_clk_div =
min_t(uint16_t, limits->max_pre_pll_clk_div,
@@ -422,20 +422,20 @@ int smiapp_pll_calculate(struct device *dev,
clk_div_even_up(
DIV_ROUND_UP(pll->ext_clk_freq_hz,
limits->max_pll_ip_freq_hz)));
- dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
+ dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %u / %u\n",
min_pre_pll_clk_div, max_pre_pll_clk_div);
i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
mul = div_u64(pll->pll_op_clk_freq_hz, i);
div = pll->ext_clk_freq_hz / i;
- dev_dbg(dev, "mul %d / div %d\n", mul, div);
+ dev_dbg(dev, "mul %u / div %u\n", mul, div);
min_pre_pll_clk_div =
max_t(uint16_t, min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
limits->max_pll_op_freq_hz)));
- dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
+ dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %u / %u\n",
min_pre_pll_clk_div, max_pre_pll_clk_div);
for (pll->pre_pll_clk_div = min_pre_pll_clk_div;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
