Add support for:
[2040:b138] Hauppauge WinTV HVR-900H (111xxx)
The hardware is similar to [2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)
The only difference is the demod Si2161 instead of Si2165 (but both are
supported by the si2165 driver).
Signed-off-by: Matthias Schwarzott <zzam@xxxxxxxxxx>
---
drivers/media/usb/cx231xx/cx231xx-cards.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 8039b76..a03a31a 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -705,7 +705,7 @@ struct cx231xx_board cx231xx_boards[] = {
},
},
[CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx] = {
- .name = "Hauppauge WinTV 930C-HD (1113xx) / PCTV QuatroStick 521e",
+ .name = "Hauppauge WinTV 930C-HD (1113xx) / HVR-900H (111xxx) / PCTV QuatroStick 521e",
.tuner_type = TUNER_NXP_TDA18271,
.tuner_addr = 0x60,
.tuner_gpio = RDE250_XCV_TUNER,
@@ -815,6 +815,9 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
{USB_DEVICE(0x2040, 0xb131),
.driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx},
+ /* Hauppauge WinTV-HVR-900-H */
+ {USB_DEVICE(0x2040, 0xb138),
+ .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
{USB_DEVICE(0x2040, 0xb140),
.driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
{USB_DEVICE(0x2040, 0xc200),
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
