Add support for:
[2040:b139] Hauppauge WinTV HVR-901H (1114xx)
According to the inf file, the hardware is similar to [2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)
The only difference is the demod Si2161 instead of Si2165 (but both are
supported by the si2165 driver).
Signed-off-by: Matthias Schwarzott <zzam@xxxxxxxxxx>
---
drivers/media/usb/cx231xx/cx231xx-cards.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index a03a31a..791f00c 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -744,7 +744,7 @@ struct cx231xx_board cx231xx_boards[] = {
} },
},
[CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx] = {
- .name = "Hauppauge WinTV 930C-HD (1114xx) / PCTV QuatroStick 522e",
+ .name = "Hauppauge WinTV 930C-HD (1114xx) / HVR-901H (1114xx) / PCTV QuatroStick 522e",
.tuner_type = TUNER_ABSENT,
.tuner_addr = 0x60,
.tuner_gpio = RDE250_XCV_TUNER,
@@ -818,6 +818,9 @@ struct usb_device_id cx231xx_id_table[] = {
/* Hauppauge WinTV-HVR-900-H */
{USB_DEVICE(0x2040, 0xb138),
.driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
+ /* Hauppauge WinTV-HVR-901-H */
+ {USB_DEVICE(0x2040, 0xb139),
+ .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx},
{USB_DEVICE(0x2040, 0xb140),
.driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
{USB_DEVICE(0x2040, 0xc200),
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
