Instead of sending command 13 to the tuner, send command 16 when sleeping. This behaviour is observed when using manufacturer provided binary-only Linux driver for TechnoTrend CT2-4400 (Windows driver does not do power management). The issue with command 13 is that firmware loading is necessary after that. This is not an issue with tuners that do not require firmware, but resuming from sleep on an Si2158 takes noticeable time as firmware is loaded on resume. Signed-off-by: Olli Salonen <olli.salonen@xxxxxx> --- drivers/media/tuners/si2157.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c index efb5cce..c84f7b8 100644 --- a/drivers/media/tuners/si2157.c +++ b/drivers/media/tuners/si2157.c @@ -197,9 +197,10 @@ static int si2157_sleep(struct dvb_frontend *fe) s->active = false; - memcpy(cmd.args, "\x13", 1); - cmd.wlen = 1; - cmd.rlen = 0; + /* standby */ + memcpy(cmd.args, "\x16\x00", 2); + cmd.wlen = 2; + cmd.rlen = 1; ret = si2157_cmd_execute(s, &cmd); if (ret) goto err; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
