This is used by the I2C code in order to slow down the
speed to 20 kHz on devices with xc5000 or xc5000c.
So, we need it to be filled for all devices.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
---
drivers/media/usb/au0828/au0828-cards.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c
index 8f2fc2fe6a89..814cc15e8c2f 100644
--- a/drivers/media/usb/au0828/au0828-cards.c
+++ b/drivers/media/usb/au0828/au0828-cards.c
@@ -97,20 +97,20 @@ struct au0828_board au0828_boards[] = {
},
[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
.name = "Hauppauge HVR950Q rev xxF8",
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
.name = "Hauppauge Woodbury",
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
+ .tuner_type = TUNER_NXP_TDA18271,
+ .tuner_addr = 0x60,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
