Hi,
I have seen similar dmesg message in some other situations (still with
3.15.6 at least):
Jul 31 00:08:38 daphile user.err kernel: xhci_hcd 0000:02:00.0: ERROR:
unexpected command completion code 0x11.
Jul 31 00:08:38 daphile user.info kernel: usb 6-2: Not enough bandwidth
for altsetting 1
Jul 31 00:08:38 daphile user.err kernel: usb 6-2: 1:1: usb_set_interface
failed (-22)
The problem has been related to the use of USB DAC with NEC uPD72020x
based PCIe USB card. And the problem is very strange because the some
DACs work perfectly fine with it and some do not. On the other hand
those non-working DACs work fine when connected to some other
(motherboard) USB connector. So it's quite complicated interaction
problem, who's to blame.
Do you think this could be anyhow related this thread?
Kimmo
On 12.08.2014 19:35, Laurent Pinchart wrote:
On Tuesday 12 August 2014 18:27:03 Hans Verkuil wrote:
On 08/12/2014 06:21 PM, Laurent Pinchart wrote:
Hi Hans,
On Tuesday 12 August 2014 17:38:55 Hans Verkuil wrote:
On 08/12/2014 05:07 PM, Hans de Goede wrote:
On 08/07/2014 04:49 PM, Udo van den Heuvel wrote:
On 2014-08-04 11:17, Laurent Pinchart wrote:
(CC'ing Hans de Goede, the pwc maintainer, and the linux-media mailing
list)
Thanks for the bug report. I've been looking into this, and there
seem to be 2 problems:
1: xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code
0x11.
This seems to be what is causing things to not work with a usb-3 port
for you. Might be fixed by this commit:
https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/drive
rs/usb/host?h=usb-next&id=3213b151387df0b95f4eada104f68eb1c1409cb3
Can you please do "lspci -nn", and then copy and paste the output here,
so that we can see what sort of xhci controller you've (and try to
reproduce the problem).
2: The triggering of a WARN_ON in __vb2_queue_cancel() when called on
streamoff. I've been looking at the code and I cannot figure out why
this is triggering I'm afraid.
You can ignore this one.
The uvc driver is doing messy things with vb2 which causes this warning.
That said, it will not break things for you. It is just a warning that
the driver needs to be improved.
I can certainly take the blame when my code needs to be improved, but in
this case the webcam is supported by the pwc driver, not the uvc driver
:-)
It was a bit confusing, but he has two problems: one pwc, one (the warning)
for uvc.
Right, I've missed the second one, my bad. A similar issue was present with
the pwc driver, which you have fixed in "[PATCH] pwc: fix WARN_ON" I believe.
I'll have a look at the uvcvideo issue. It can be ignored for now.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
