Re: [PATCH/RFC v4 15/21] media: Add registration helpers for V4L2 flash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/11/2014 02:26 PM, Sakari Ailus wrote:

Hi Jacek,


...

+static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
+{
+    struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+    struct led_classdev_flash *flash = v4l2_flash->flash;
+    struct v4l2_flash_ctrl *ctrl = &v4l2_flash->ctrl;
+    struct v4l2_flash_ctrl_config *config = &v4l2_flash->config;
+    enum led_brightness torch_brightness;
+    bool external_strobe;
+    int ret;
+
+    switch (c->id) {
+    case V4L2_CID_FLASH_LED_MODE:
+        switch (c->val) {
+        case V4L2_FLASH_LED_MODE_NONE:
+            call_flash_op(v4l2_flash, torch_brightness_set,
+                            &flash->led_cdev, 0);
+            return call_flash_op(v4l2_flash, strobe_set, flash,
+                            false);
+        case V4L2_FLASH_LED_MODE_FLASH:
+            /* Turn off torch LED */
+            call_flash_op(v4l2_flash, torch_brightness_set,
+                            &flash->led_cdev, 0);
+            external_strobe = (ctrl->source->val ==
+                    V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+            return call_flash_op(v4l2_flash, external_strobe_set,
+                        flash, external_strobe);
+        case V4L2_FLASH_LED_MODE_TORCH:
+            /* Stop flash strobing */
+            ret = call_flash_op(v4l2_flash, strobe_set, flash,
+                            false);
+            if (ret)
+                return ret;
+
+            torch_brightness =
+                v4l2_flash_intensity_to_led_brightness(
+                        &config->torch_intensity,
+                        ctrl->torch_intensity->val);
+            call_flash_op(v4l2_flash, torch_brightness_set,
+                    &flash->led_cdev, torch_brightness);
+            return ret;
+        }
+        break;
+    case V4L2_CID_FLASH_STROBE_SOURCE:
+        external_strobe = (c->val ==
V4L2_FLASH_STROBE_SOURCE_EXTERNAL);

Is the external_strobe argument match exactly to the strobe source
control? You seem to assume that in g_volatile_ctrl() above. I think
having it the either way is fine but not both. :-)

The STROBE_SOURCE_EXTERNAL control state is volatile if a flash device
depends on muxes that route strobe signals to more then one flash
device. In such a case it behaves similarly to FLASH_STROBE control,
i.e. it activates external strobe only for the flash timeout period.
I touched this issue in the cover letter of this patch series,
paragraph 2.

I meant that flash->external_strobe is directly used as
V4L2_CID_FLASH_STROBE_SOURCE. Are the two guaranteed to be the same?

Yes, the external_strobe sysfs attribute is mapped to it.

Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux