There are still a few bugs that can happen when suspending and a video stream is active. This patch series fix them. After that, resume works fine, even it suspend happened while streaming. There is one remaining issue though: xc5000 firmware doesn't load after resume. What happens (on both analog and digital) is: [ 143.071323] xc5000: xc5000_suspend() [ 143.071324] xc5000: xc5000_tuner_reset() [ 143.099992] au0828: Suspend [ 143.099992] au0828: Stopping RC [ 143.101694] au0828: stopping V4L2 [ 143.101695] au0828: stopping V4L2 active URBs [ 144.988637] au0828: Resume [ 145.342026] au0828: Restarting RC [ 145.343296] au0828: restarting V4L2 [ 145.464413] xc5000: xc5000_is_firmware_loaded() returns True id = 0xffff [ 145.464414] xc5000: xc_set_signal_source(1) Source = CABLE [ 146.370861] xc5000: xc_set_signal_source(1) failed I suspect that it has to do with a wrong value for the I2C gateway. The proper fix is likely to convert au0828 to use the I2C mux support, and remove the old i2c_gate_ctrl approach. However, such patch would require more work, to avoid breaking other drivers. Mauro Carvalho Chehab (3): au0828: fix checks if dvb is initialized au0828: Fix DVB resume when streaming xc5000: be sure that the firmware is there before set params drivers/media/tuners/xc5000.c | 10 +++++----- drivers/media/usb/au0828/au0828-dvb.c | 24 ++++++++++++++---------- drivers/media/usb/au0828/au0828.h | 4 ++-- 3 files changed, 21 insertions(+), 17 deletions(-) -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
