[PATCH 1/4 v2] support for DVBSky dvb-s2 usb: Add ts clock and clock polarity, lnb set voltage for m88ds3103

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add ts clock and clock polarity, lnb set voltage.

Signed-off-by: Nibble Max <nibble.max@xxxxxxxxx>
---
 drivers/media/dvb-frontends/m88ds3103.c | 77 +++++++++++++++++++++------------
 drivers/media/dvb-frontends/m88ds3103.h | 25 ++++++++---
 2 files changed, 70 insertions(+), 32 deletions(-)

diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index dfe0c2f..142f9a6 100644
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -247,7 +247,7 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 	u8 u8tmp, u8tmp1, u8tmp2;
 	u8 buf[2];
 	u16 u16tmp, divide_ratio;
-	u32 tuner_frequency, target_mclk, ts_clk;
+	u32 tuner_frequency, target_mclk;
 	s32 s32tmp;
 	dev_dbg(&priv->i2c->dev,
 			"%s: delivery_system=%d modulation=%d frequency=%d symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n",
@@ -316,9 +316,6 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 				target_mclk = 144000;
 			break;
 		case M88DS3103_TS_PARALLEL:
-		case M88DS3103_TS_PARALLEL_12:
-		case M88DS3103_TS_PARALLEL_16:
-		case M88DS3103_TS_PARALLEL_19_2:
 		case M88DS3103_TS_CI:
 			if (c->symbol_rate < 18000000)
 				target_mclk = 96000;
@@ -352,33 +349,17 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 	switch (priv->cfg->ts_mode) {
 	case M88DS3103_TS_SERIAL:
 		u8tmp1 = 0x00;
-		ts_clk = 0;
-		u8tmp = 0x46;
+		u8tmp = 0x06;
 		break;
 	case M88DS3103_TS_SERIAL_D7:
 		u8tmp1 = 0x20;
-		ts_clk = 0;
-		u8tmp = 0x46;
+		u8tmp = 0x06;
 		break;
 	case M88DS3103_TS_PARALLEL:
-		ts_clk = 24000;
-		u8tmp = 0x42;
-		break;
-	case M88DS3103_TS_PARALLEL_12:
-		ts_clk = 12000;
-		u8tmp = 0x42;
-		break;
-	case M88DS3103_TS_PARALLEL_16:
-		ts_clk = 16000;
-		u8tmp = 0x42;
-		break;
-	case M88DS3103_TS_PARALLEL_19_2:
-		ts_clk = 19200;
-		u8tmp = 0x42;
+		u8tmp = 0x02;
 		break;
 	case M88DS3103_TS_CI:
-		ts_clk = 6000;
-		u8tmp = 0x43;
+		u8tmp = 0x03;
 		break;
 	default:
 		dev_dbg(&priv->i2c->dev, "%s: invalid ts_mode\n", __func__);
@@ -386,6 +367,9 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 		goto err;
 	}
 
+	if (priv->cfg->ts_clk_pol)
+		u8tmp |= 0x40;
+
 	/* TS mode */
 	ret = m88ds3103_wr_reg(priv, 0xfd, u8tmp);
 	if (ret)
@@ -399,8 +383,8 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 			goto err;
 	}
 
-	if (ts_clk) {
-		divide_ratio = DIV_ROUND_UP(target_mclk, ts_clk);
+	if (priv->cfg->ts_clk) {
+		divide_ratio = DIV_ROUND_UP(target_mclk, priv->cfg->ts_clk);
 		u8tmp1 = divide_ratio / 2;
 		u8tmp2 = DIV_ROUND_UP(divide_ratio, 2);
 	} else {
@@ -411,7 +395,7 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 
 	dev_dbg(&priv->i2c->dev,
 			"%s: target_mclk=%d ts_clk=%d divide_ratio=%d\n",
-			__func__, target_mclk, ts_clk, divide_ratio);
+			__func__, target_mclk, priv->cfg->ts_clk, divide_ratio);
 
 	u8tmp1--;
 	u8tmp2--;
@@ -1053,6 +1037,44 @@ err:
 	return ret;
 }
 
+static int m88ds3103_set_voltage(struct dvb_frontend *fe,
+	fe_sec_voltage_t voltage)
+{
+	struct m88ds3103_priv *priv = fe->demodulator_priv;
+	u8 data;
+
+	dev_dbg(&priv->i2c->dev, "%s: pin_ctrl = (%02x)\n",
+			__func__, priv->cfg->pin_ctrl);
+
+	m88ds3103_rd_reg(priv, 0xa2, &data);
+
+	if (priv->cfg->pin_ctrl & 0x80) { /*If control pin is assigned.*/
+		data &= ~0x03; /* bit0 V/H, bit1 off/on */
+		if (priv->cfg->pin_ctrl & 0x02)
+			data |= 0x02;
+
+		switch (voltage) {
+		case SEC_VOLTAGE_18:
+		     if ((priv->cfg->pin_ctrl & 0x01) == 0)
+			data |= 0x01;
+		     break;
+		case SEC_VOLTAGE_13:
+		     if (priv->cfg->pin_ctrl & 0x01)
+			data |= 0x01;
+		     break;
+		case SEC_VOLTAGE_OFF:
+		     if (priv->cfg->pin_ctrl & 0x02)
+			data &= ~0x02;
+		     else
+			data |= 0x02;
+		     break;
+		}
+	}
+	m88ds3103_wr_reg(priv, 0xa2, data);
+
+	return 0;
+}
+
 static int m88ds3103_diseqc_send_master_cmd(struct dvb_frontend *fe,
 		struct dvb_diseqc_master_cmd *diseqc_cmd)
 {
@@ -1370,6 +1392,7 @@ static struct dvb_frontend_ops m88ds3103_ops = {
 	.diseqc_send_burst = m88ds3103_diseqc_send_burst,
 
 	.set_tone = m88ds3103_set_tone,
+	.set_voltage = m88ds3103_set_voltage,
 };
 
 MODULE_AUTHOR("Antti Palosaari <crope@xxxxxx>");
diff --git a/drivers/media/dvb-frontends/m88ds3103.h b/drivers/media/dvb-frontends/m88ds3103.h
index bbb7e3a..ed9c2045 100644
--- a/drivers/media/dvb-frontends/m88ds3103.h
+++ b/drivers/media/dvb-frontends/m88ds3103.h
@@ -47,14 +47,23 @@ struct m88ds3103_config {
 	 */
 #define M88DS3103_TS_SERIAL             0 /* TS output pin D0, normal */
 #define M88DS3103_TS_SERIAL_D7          1 /* TS output pin D7 */
-#define M88DS3103_TS_PARALLEL           2 /* 24 MHz, normal */
-#define M88DS3103_TS_PARALLEL_12        3 /* 12 MHz */
-#define M88DS3103_TS_PARALLEL_16        4 /* 16 MHz */
-#define M88DS3103_TS_PARALLEL_19_2      5 /* 19.2 MHz */
-#define M88DS3103_TS_CI                 6 /* 6 MHz */
+#define M88DS3103_TS_PARALLEL           2 /* TS Parallel mode */
+#define M88DS3103_TS_CI                 3 /* TS CI Mode */
 	u8 ts_mode;
 
 	/*
+	 * TS clk in KHz
+	 * Default: 0.
+	 */
+	u32 ts_clk;
+
+	/*
+	 * TS clk polarity.
+	 * Default: 0. 1-active at falling edge; 0-active at rising edge.
+	 */
+	u8 ts_clk_pol:1;
+
+	/*
 	 * spectrum inversion
 	 * Default: 0
 	 */
@@ -86,6 +95,12 @@ struct m88ds3103_config {
 	 * Default: none, must set
 	 */
 	u8 agc;
+
+	/*
+	 * LNB pin control
+	 *
+	 */
+	u8 pin_ctrl;
 };
 
 /*

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux