On Tue, Jul 29, 2014 at 07:06:25PM +0200, Philipp Zabel wrote: > > I followed the step to generate the firmware v4l-coda960-imx6q, and > > tested it on next-20140725 with patch 'ARM: dts: imx6qdl: Enable CODA960 > > VPU' applied on top of it. But I got the error of 'Wrong firmwarel' as > > below. > > > > [ 2.582837] coda 2040000.vpu: requesting firmware 'v4l-coda960-imx6q.bin' for CODA960 > > [ 2.593344] coda 2040000.vpu: Firmware code revision: 0 > > [ 2.598649] coda 2040000.vpu: Wrong firmware. Hw: CODA960, Fw: (0x0000), Version: 0.0.0 > > I just tried with the same kernel, and the above download, converted > with the program in the referenced mail, and I get this: > > coda 2040000.vpu: Firmware code revision: 36350 > coda 2040000.vpu: Initialized CODA960. > coda 2040000.vpu: Unsupported firmware version: 2.1.9 > coda 2040000.vpu: codec registered as /dev/video0 Okay, the reason I'm running into the issue is that I'm using the FSL U-Boot which turns off VDDPU at initialization. Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
