Hi Mauro, thanks for taking the time to look at this. On Mon, Jun 30, 2014 at 11:56:33AM -0300, Mauro Carvalho Chehab wrote: > Em Mon, 30 Jun 2014 23:19:46 +1000 > Vincent McIntyre <vincent.mcintyre@xxxxxxxxx> escreveu: > > > Hi, > > > > I am reposting this since it got ignored/missed last time around... > > > > On 5/14/14, Vincent McIntyre <vincent.mcintyre@xxxxxxxxx> wrote: > > > Hi, > > > > > > Antti asked me to report this. > > > > > > I built the latest media_build git on Ubuntu 12.04, with 3.8.0 kernel, > > > using './build --main-git'. > > > The attached tarball has the relvant info. > > > > > > Without the media_build modules, firmware loads fine (file dmesg.1) > > > Once I build and install the media_build modules, the firmware no > > > longer loads. (dmesg.2) > > > > > > The firmware loading issue appears to have been reported to ubuntu (a > > > later kernel, 3.11) with a possible fix proposed, see > > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291459 > > > > > > I can post lspci etc details if people want. > > > > > > > An updated version of the tar file is attached. > > > > dmesg.1 is from 3.8.0-38 plus media-build modules and shows the > > firmware loading issue. > > The media-build HEAD revision was > > commit e4a8d40f63afa8b0276ea7758d9b4d32e64a964d > > Author: Hans Verkuil <hans.verkuil@xxxxxxxxx> > > Date: Wed Jun 18 10:27:51 2014 +0200 > > > > dmesg.2 is from 3.8.0-42 with the ubuntu-provided modules and does not > > show the issue. > > > > The issue occurs in later ubuntu kernels, 3.11 as noted previously > > and 3.13.0-30. > > > > The OS is ubuntu 12.04 LTS, amd64. > > > > I looked into bisecting this but could not figure out a procedure > > since the 'build' script tries really hard to use the latest > > media-build and kernel sources. It looks like one has to run the > > media-build 'make' against a checkout of the vanilla kernel that > > roughly corresponds in time (or at least is not from a time later than > > the current media-build revision that is checked out). > > > > > > > Please respond this time > > Next time, please add the logs directly at the email, as this makes > clearer about what's the problem and what driver has the issues. > Ok. I wanted to ensure it did not get mangled into unreadability by the journey through various email systems. > Anyway, based on this: > > [ 16.332247] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. > [ 16.344378] cxusb: i2c wr: len=64 is too big! > > I suspect that the enclosed patch should fix your issue. Please test. If it > works, please reply to this email with: > Tested-by: your name <your@email> > The patch is working for me. My tested-by is inline below. Test procedure: - git checkout git://linuxtv.org/media_build.git - cd media_build - ./build --main-git - grep "define MAX_XFER_SIZE" media/drivers/media/usb/dvb-usb/cxusb.c #define MAX_XFER_SIZE 64 - vi media/drivers/media/usb/dvb-usb/cxusb.c - grep "define MAX_XFER_SIZE" media/drivers/media/usb/dvb-usb/cxusb.c #define MAX_XFER_SIZE 80 - cd media; make -C ../v4l; cd .. - sudo make install - sudo halt - (after boot) dmesg - try to tune one of the receivers - works ok - dmesg The final dmesg output is inline below. > Cheers, > Mauro > > - > > cxusb: increase buffer lenght to 80 bytes > > As reported by Vincent: > [ 16.332247] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. > [ 16.344378] cxusb: i2c wr: len=64 is too big! > > 64 bytes is too short for firmware load on this device. So, increase it > to 80 bytes. > > Reported-by: Vincent McIntyre <vincent.mcintyre@xxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Tested-by: Vincent McIntyre <vincent.mcintyre@xxxxxxxxx> > > diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c > index 6acde5ee4324..a22726ccca64 100644 > --- a/drivers/media/usb/dvb-usb/cxusb.c > +++ b/drivers/media/usb/dvb-usb/cxusb.c > @@ -44,7 +44,7 @@ > #include "atbm8830.h" > > /* Max transfer size done by I2C transfer functions */ > -#define MAX_XFER_SIZE 64 > +#define MAX_XFER_SIZE 80 > > /* debug */ > static int dvb_usb_cxusb_debug; > Final dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-38-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #56~precise1-Ubuntu SMP Thu Mar 13 16:22:48 UTC 2014 (Ubuntu 3.8.0-38.56~precise1-generic 3.8.13.19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-38-generic root=UUID=00d24ba0-1c1a-420b-a0de-e811e8a8b90c ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ed12fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ed13000-0x000000007ed14fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ed15000-0x000000007ee2dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ee2e000-0x000000007eee4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007eee5000-0x000000007eee8fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eee9000-0x000000007eef2fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eef3000-0x000000007eef3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eef4000-0x000000007eefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007eeff000-0x000000007eefffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ef00000-0x000000007effffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: /DG33BU, BIOS DPP3510J.86A.0293.2007.1002.1519 10/02/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7ef00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F000000 mask FFF000000 uncachable [ 0.000000] 2 base 07EF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2032MB, range: 16MB, type UC [ 0.000000] reg 2, base: 2031MB, range: 1MB, type UC [ 0.000000] total RAM covered: 2031M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2031MB, range: 1MB, type UC [ 0.000000] reg 2, base: 2032MB, range: 16MB, type UC [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7eefffff] [ 0.000000] [mem 0x00000000-0x7edfffff] page 2M [ 0.000000] [mem 0x7ee00000-0x7eefffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x7eefffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x35f4c000-0x36f9dfff] [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 000000007eefd038 00060 (v01 INTEL DG33BU 00000125 01000013) [ 0.000000] ACPI: FACP 000000007eefc000 00074 (v01 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000007eef8000 03D05 (v01 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: FACS 000000007ee99000 00040 [ 0.000000] ACPI: APIC 000000007eef7000 00078 (v01 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: WDDT 000000007eef6000 00040 (v01 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000007eef5000 0003C (v01 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: ASF! 000000007eef4000 000A6 (v32 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: DMAR 000000007eef2000 00128 (v01 INTEL DG33BU 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eef1000 00204 (v01 INTEL CpuPm 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eef0000 00175 (v01 INTEL Cpu0Ist 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eeef000 00175 (v01 INTEL Cpu1Ist 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eeee000 00175 (v01 INTEL Cpu2Ist 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eeed000 00175 (v01 INTEL Cpu3Ist 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eeec000 000DD (v01 INTEL Cpu0Cst 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eeeb000 000DD (v01 INTEL Cpu1Cst 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eeea000 000DD (v01 INTEL Cpu2Cst 00000125 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007eee9000 000DD (v01 INTEL Cpu3Cst 00000125 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007eefffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7eefffff] [ 0.000000] NODE_DATA [mem 0x7ee29000-0x7ee2dfff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c400000-ffff88007e3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7ed12fff] [ 0.000000] node 0: [mem 0x7ed15000-0x7ee2dfff] [ 0.000000] node 0: [mem 0x7eee5000-0x7eee8fff] [ 0.000000] node 0: [mem 0x7eef3000-0x7eef3fff] [ 0.000000] node 0: [mem 0x7eeff000-0x7eefffff] [ 0.000000] On node 0 totalpages: 519616 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8060 pages used for memmap [ 0.000000] DMA32 zone: 507574 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007ed13000 - 000000007ed15000 [ 0.000000] PM: Registered nosave memory: 000000007ee2e000 - 000000007eee5000 [ 0.000000] PM: Registered nosave memory: 000000007eee9000 - 000000007eef3000 [ 0.000000] PM: Registered nosave memory: 000000007eef4000 - 000000007eeff000 [ 0.000000] e820: [mem 0x7f000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007ea00000 s84928 r8192 d21568 u524288 [ 0.000000] pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 511486 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-38-generic root=UUID=00d24ba0-1c1a-420b-a0de-e811e8a8b90c ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /build/buildd/linux-lts-raring-3.8.0/drivers/iommu/dmar.c:481 warn_invalid_dmar+0x8f/0xa0() [ 0.000000] Hardware name: [ 0.000000] Your BIOS is broken; DMAR reported at address feb00000 returns all ones! [ 0.000000] BIOS vendor: Intel Corp.; Ver: DPP3510J.86A.0293.2007.1002.1519; Product Version: [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 3.8.0-38-generic #56~precise1-Ubuntu [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81059bef>] warn_slowpath_common+0x7f/0xc0 [ 0.000000] [<ffffffff81059c8f>] warn_slowpath_fmt_taint+0x3f/0x50 [ 0.000000] [<ffffffff81d1de43>] ? __early_set_fixmap+0x96/0x9d [ 0.000000] [<ffffffff815bbf1f>] warn_invalid_dmar+0x8f/0xa0 [ 0.000000] [<ffffffff81d1e2ac>] ? early_iounmap+0xe4/0x12e [ 0.000000] [<ffffffff81d46c08>] check_zero_address+0xc8/0xf7 [ 0.000000] [<ffffffff817033b1>] ? bad_to_user+0x7bb/0x7bb [ 0.000000] [<ffffffff81d46c4e>] detect_intel_iommu+0x17/0xb8 [ 0.000000] [<ffffffff81d0f6c9>] pci_iommu_alloc+0x44/0x6e [ 0.000000] [<ffffffff81d1dc06>] mem_init+0x19/0xec [ 0.000000] [<ffffffff816db6fb>] ? set_nmi_gate+0x48/0x4a [ 0.000000] [<ffffffff81d06a61>] start_kernel+0x1e3/0x3de [ 0.000000] [<ffffffff81d067ff>] ? pass_bootoption.constprop.3+0xd3/0xd3 [ 0.000000] [<ffffffff81d06397>] x86_64_start_reservations+0x131/0x135 [ 0.000000] [<ffffffff81d06120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d06468>] x86_64_start_kernel+0xcd/0xdc [ 0.000000] ---[ end trace eed57aae45f200ef ]--- [ 0.000000] Memory: 2012692k/2079744k available (7180k kernel code, 1280k absent, 65772k reserved, 6063k data, 1016k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2332.895 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4665.79 BogoMIPS (lpj=9331580) [ 0.004112] pid_max: default: 32768 minimum: 301 [ 0.004192] Security Framework initialized [ 0.004260] AppArmor: AppArmor initialized [ 0.004311] Yama: becoming mindful. [ 0.008049] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009069] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.009599] Mount-cache hash table entries: 256 [ 0.009872] Initializing cgroup subsys cpuacct [ 0.009927] Initializing cgroup subsys memory [ 0.009987] Initializing cgroup subsys devices [ 0.010040] Initializing cgroup subsys freezer [ 0.010093] Initializing cgroup subsys blkio [ 0.010145] Initializing cgroup subsys perf_event [ 0.010200] Initializing cgroup subsys hugetlb [ 0.010280] CPU: Physical Processor ID: 0 [ 0.010331] CPU: Processor Core ID: 0 [ 0.010383] mce: CPU supports 6 MCE banks [ 0.010442] CPU0: Thermal monitoring enabled (TM2) [ 0.010498] process: using mwait in idle threads [ 0.010554] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.010554] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.010554] tlb_flushall_shift: -1 [ 0.010760] Freeing SMP alternatives: 24k freed [ 0.013429] ACPI: Core revision 20121018 [ 0.019044] ftrace: allocating 29410 entries in 115 pages [ 0.028112] dmar: Host address width 36 [ 0.028168] dmar: DRHD base: 0x000000feb00000 flags: 0x0 [ 0.028230] dmar: IOMMU: failed to map dmar0 [ 0.028282] dmar: parse DMAR table failure. [ 0.028682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070135] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (fam: 06, model: 0f, stepping: 0b) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] perf_event_intel: PEBS disabled due to CPU errata [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] smpboot: Booting Node 0, Processors #1 [ 0.082915] Brought up 2 CPUs [ 0.083016] smpboot: Total of 2 processors activated (9331.58 BogoMIPS) [ 0.083168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.084100] devtmpfs: initialized [ 0.085025] EVM: security.selinux [ 0.085076] EVM: security.SMACK64 [ 0.085127] EVM: security.capability [ 0.085189] PM: Registering ACPI NVS region [mem 0x7ee2e000-0x7eee4fff] (749568 bytes) [ 0.085189] regulator-dummy: no parameters [ 0.085274] NET: Registered protocol family 16 [ 0.085464] ACPI: bus type pci registered [ 0.088057] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.088132] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.102851] PCI: Using configuration type 1 for base access [ 0.103798] bio: create slab <bio-0> at 0 [ 0.103798] ACPI: Added _OSI(Module Device) [ 0.103798] ACPI: Added _OSI(Processor Device) [ 0.103798] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.103798] ACPI: Added _OSI(Processor Aggregator Device) [ 0.103798] ACPI: EC: Look up EC in DSDT [ 0.103798] ACPI: Interpreter enabled [ 0.103798] ACPI: (supports S0 S1 S3 S4 S5) [ 0.104186] ACPI: Using IOAPIC for interrupt routing [ 0.107398] ACPI: No dock devices found. [ 0.107452] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.108119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.108176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.109368] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.109371] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.109374] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.109376] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored) [ 0.109379] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] (ignored) [ 0.109381] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xefffffff] (ignored) [ 0.109383] PCI: root bus 00: using default resources [ 0.109386] pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.109487] PCI host bridge to bus 0000:00 [ 0.109540] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.109595] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.109651] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.109716] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.109756] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.109793] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.109810] pci 0000:00:03.0: [8086:29c4] type 00 class 0x078000 [ 0.109824] pci 0000:00:03.0: reg 10: [mem 0x93326100-0x9332610f 64bit] [ 0.109865] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.109906] pci 0000:00:19.0: [8086:294c] type 00 class 0x020000 [ 0.109923] pci 0000:00:19.0: reg 10: [mem 0x93300000-0x9331ffff] [ 0.109931] pci 0000:00:19.0: reg 14: [mem 0x93324000-0x93324fff] [ 0.109939] pci 0000:00:19.0: reg 18: [io 0x4400-0x441f] [ 0.109996] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.110015] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.110054] pci 0000:00:1a.0: reg 20: [io 0x40e0-0x40ff] [ 0.110101] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.110140] pci 0000:00:1a.1: reg 20: [io 0x40c0-0x40df] [ 0.110187] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.110226] pci 0000:00:1a.2: reg 20: [io 0x40a0-0x40bf] [ 0.110283] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.110303] pci 0000:00:1a.7: reg 10: [mem 0x93325c00-0x93325fff] [ 0.110386] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.110410] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.110424] pci 0000:00:1b.0: reg 10: [mem 0x93320000-0x93323fff 64bit] [ 0.110485] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.110505] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.110567] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.110589] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.110651] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.110672] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.110734] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.110755] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.110817] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.110839] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.110901] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.110925] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.110963] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f] [ 0.111012] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.111051] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f] [ 0.111099] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.111137] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f] [ 0.111193] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.111213] pci 0000:00:1d.7: reg 10: [mem 0x93325800-0x93325bff] [ 0.111295] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.111316] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.111373] pci 0000:00:1f.0: [8086:2912] type 00 class 0x060100 [ 0.111448] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.111521] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) [ 0.111636] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.111653] pci 0000:00:1f.2: reg 10: [io 0x4428-0x442f] [ 0.111661] pci 0000:00:1f.2: reg 14: [io 0x4434-0x4437] [ 0.111668] pci 0000:00:1f.2: reg 18: [io 0x4420-0x4427] [ 0.111676] pci 0000:00:1f.2: reg 1c: [io 0x4430-0x4433] [ 0.111683] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] [ 0.111691] pci 0000:00:1f.2: reg 24: [mem 0x93325000-0x933257ff] [ 0.111733] pci 0000:00:1f.2: PME# supported from D3hot [ 0.111750] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.111764] pci 0000:00:1f.3: reg 10: [mem 0x93326000-0x933260ff 64bit] [ 0.111783] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] [ 0.111840] pci 0000:01:00.0: [10de:0f00] type 00 class 0x030000 [ 0.111850] pci 0000:01:00.0: reg 10: [mem 0x92000000-0x92ffffff] [ 0.111860] pci 0000:01:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.111870] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit pref] [ 0.111878] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.111885] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.111939] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 [ 0.111949] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x93003fff] [ 0.112047] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.112102] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.112105] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff] [ 0.112110] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref] [ 0.112145] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.112202] pci 0000:00:1c.0: bridge window [mem 0x93400000-0x934fffff] [ 0.112258] pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f [ 0.112273] pci 0000:03:00.0: reg 10: [io 0x2018-0x201f] [ 0.112285] pci 0000:03:00.0: reg 14: [io 0x2024-0x2027] [ 0.112297] pci 0000:03:00.0: reg 18: [io 0x2010-0x2017] [ 0.112308] pci 0000:03:00.0: reg 1c: [io 0x2020-0x2023] [ 0.112320] pci 0000:03:00.0: reg 20: [io 0x2000-0x200f] [ 0.112332] pci 0000:03:00.0: reg 24: [mem 0x93200000-0x932001ff] [ 0.112394] pci 0000:03:00.0: supports D1 [ 0.112396] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.112416] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.112497] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.112552] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.112556] pci 0000:00:1c.1: bridge window [mem 0x93200000-0x932fffff] [ 0.112595] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.112652] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x935fffff] [ 0.112691] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.112748] pci 0000:00:1c.3: bridge window [mem 0x93600000-0x936fffff] [ 0.112786] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.112843] pci 0000:00:1c.4: bridge window [mem 0x93700000-0x937fffff] [ 0.112875] pci 0000:07:00.0: [1106:3038] type 00 class 0x0c0300 [ 0.112919] pci 0000:07:00.0: reg 20: [io 0x1040-0x105f] [ 0.112960] pci 0000:07:00.0: supports D1 D2 [ 0.112962] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot [ 0.112981] pci 0000:07:00.2: [1106:3104] type 00 class 0x0c0320 [ 0.112997] pci 0000:07:00.2: reg 10: [mem 0x93104900-0x931049ff] [ 0.113066] pci 0000:07:00.2: supports D1 D2 [ 0.113068] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot [ 0.113091] pci 0000:07:01.0: [1106:3038] type 00 class 0x0c0300 [ 0.113135] pci 0000:07:01.0: reg 20: [io 0x1020-0x103f] [ 0.113175] pci 0000:07:01.0: supports D1 D2 [ 0.113178] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.113195] pci 0000:07:01.1: [1106:3038] type 00 class 0x0c0300 [ 0.113239] pci 0000:07:01.1: reg 20: [io 0x1000-0x101f] [ 0.113279] pci 0000:07:01.1: supports D1 D2 [ 0.113282] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.113299] pci 0000:07:01.2: [1106:3104] type 00 class 0x0c0320 [ 0.113315] pci 0000:07:01.2: reg 10: [mem 0x93104800-0x931048ff] [ 0.113383] pci 0000:07:01.2: supports D1 D2 [ 0.113386] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.113410] pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010 [ 0.113427] pci 0000:07:03.0: reg 10: [mem 0x93104000-0x931047ff] [ 0.113437] pci 0000:07:03.0: reg 14: [mem 0x93100000-0x93103fff] [ 0.113502] pci 0000:07:03.0: supports D1 D2 [ 0.113504] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot [ 0.113545] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.113604] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.113608] pci 0000:00:1e.0: bridge window [mem 0x93100000-0x931fffff] [ 0.113613] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.113616] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.113646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.113745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.113780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.113813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.113847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.113883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.113950] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.114022] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.115348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.115763] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 0.116185] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.116596] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.117006] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12) [ 0.117420] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) [ 0.117830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 0.118241] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.120017] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.120090] vgaarb: loaded [ 0.120140] vgaarb: bridge control possible 0000:01:00.0 [ 0.120393] SCSI subsystem initialized [ 0.120445] ACPI: bus type scsi registered [ 0.120505] libata version 3.00 loaded. [ 0.120505] ACPI: bus type usb registered [ 0.120505] usbcore: registered new interface driver usbfs [ 0.120505] usbcore: registered new interface driver hub [ 0.120505] usbcore: registered new device driver usb [ 0.120505] PCI: Using ACPI for IRQ routing [ 0.122208] PCI: pci_cache_line_size set to 64 bytes [ 0.122290] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.122295] e820: reserve RAM buffer [mem 0x7ed13000-0x7fffffff] [ 0.122297] e820: reserve RAM buffer [mem 0x7ee2e000-0x7fffffff] [ 0.122299] e820: reserve RAM buffer [mem 0x7eee9000-0x7fffffff] [ 0.122301] e820: reserve RAM buffer [mem 0x7eef4000-0x7fffffff] [ 0.122303] e820: reserve RAM buffer [mem 0x7ef00000-0x7fffffff] [ 0.122390] NetLabel: Initializing [ 0.122440] NetLabel: domain hash size = 128 [ 0.122492] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.122555] NetLabel: unlabeled traffic allowed by default [ 0.124033] Switching to clocksource refined-jiffies [ 0.129247] AppArmor: AppArmor Filesystem Enabled [ 0.129331] pnp: PnP ACPI init [ 0.129395] ACPI: bus type pnp registered [ 0.129535] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.129593] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved [ 0.129650] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved [ 0.129707] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.129764] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.129821] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.129878] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.129935] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.129992] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved [ 0.130049] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.130107] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.130164] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved [ 0.130223] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130350] pnp 00:01: [dma 4] [ 0.130371] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.130406] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.130437] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.130463] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.130511] system 00:05: [io 0x0500-0x053f] has been reserved [ 0.130567] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.130623] system 00:05: [io 0x0680-0x06ff] has been reserved [ 0.130680] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130755] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131091] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.131142] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.131188] pnp: PnP ACPI: found 9 devices [ 0.131240] ACPI: ACPI bus type pnp unregistered [ 0.137231] Switching to clocksource acpi_pm [ 0.140001] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.140001] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.140001] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.140001] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.140001] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.140001] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 0.140001] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.140001] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 [ 0.140001] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.140001] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 [ 0.140001] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.140001] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.140001] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.140001] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.140001] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.140001] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.140001] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.140001] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.140001] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.140001] pci 0000:00:1c.0: BAR 15: assigned [mem 0x93800000-0x939fffff 64bit pref] [ 0.140001] pci 0000:00:1c.1: BAR 15: assigned [mem 0x93a00000-0x93bfffff 64bit pref] [ 0.140001] pci 0000:00:1c.2: BAR 15: assigned [mem 0x93c00000-0x93dfffff 64bit pref] [ 0.140001] pci 0000:00:1c.3: BAR 15: assigned [mem 0x93e00000-0x93ffffff 64bit pref] [ 0.140001] pci 0000:00:1c.4: BAR 15: assigned [mem 0x94000000-0x941fffff 64bit pref] [ 0.140001] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.140001] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 0.140001] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff] [ 0.140001] pci 0000:00:1c.4: BAR 13: assigned [io 0x8000-0x8fff] [ 0.140001] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref] [ 0.140001] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.140001] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.140001] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff] [ 0.140001] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref] [ 0.140001] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.140001] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.140001] pci 0000:00:1c.0: bridge window [mem 0x93400000-0x934fffff] [ 0.140001] pci 0000:00:1c.0: bridge window [mem 0x93800000-0x939fffff 64bit pref] [ 0.140001] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.140001] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.140001] pci 0000:00:1c.1: bridge window [mem 0x93200000-0x932fffff] [ 0.140001] pci 0000:00:1c.1: bridge window [mem 0x93a00000-0x93bfffff 64bit pref] [ 0.140001] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.140001] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.140001] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x935fffff] [ 0.140001] pci 0000:00:1c.2: bridge window [mem 0x93c00000-0x93dfffff 64bit pref] [ 0.140001] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.140001] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff] [ 0.140001] pci 0000:00:1c.3: bridge window [mem 0x93600000-0x936fffff] [ 0.140001] pci 0000:00:1c.3: bridge window [mem 0x93e00000-0x93ffffff 64bit pref] [ 0.140001] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.140001] pci 0000:00:1c.4: bridge window [io 0x8000-0x8fff] [ 0.140001] pci 0000:00:1c.4: bridge window [mem 0x93700000-0x937fffff] [ 0.140001] pci 0000:00:1c.4: bridge window [mem 0x94000000-0x941fffff 64bit pref] [ 0.140001] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.140001] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.140001] pci 0000:00:1e.0: bridge window [mem 0x93100000-0x931fffff] [ 0.140001] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.140001] pci 0000:00:1c.2: enabling device (0000 -> 0003) [ 0.140001] pci 0000:00:1c.3: enabling device (0000 -> 0003) [ 0.142722] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 0.142784] pci 0000:00:1e.0: setting latency timer to 64 [ 0.142788] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.142790] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.142793] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.142795] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff] [ 0.142798] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref] [ 0.142800] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.142802] pci_bus 0000:02: resource 1 [mem 0x93400000-0x934fffff] [ 0.142805] pci_bus 0000:02: resource 2 [mem 0x93800000-0x939fffff 64bit pref] [ 0.142807] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.142809] pci_bus 0000:03: resource 1 [mem 0x93200000-0x932fffff] [ 0.142812] pci_bus 0000:03: resource 2 [mem 0x93a00000-0x93bfffff 64bit pref] [ 0.142814] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.142816] pci_bus 0000:04: resource 1 [mem 0x93500000-0x935fffff] [ 0.142819] pci_bus 0000:04: resource 2 [mem 0x93c00000-0x93dfffff 64bit pref] [ 0.142821] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff] [ 0.142823] pci_bus 0000:05: resource 1 [mem 0x93600000-0x936fffff] [ 0.142826] pci_bus 0000:05: resource 2 [mem 0x93e00000-0x93ffffff 64bit pref] [ 0.142828] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff] [ 0.142830] pci_bus 0000:06: resource 1 [mem 0x93700000-0x937fffff] [ 0.142833] pci_bus 0000:06: resource 2 [mem 0x94000000-0x941fffff 64bit pref] [ 0.142835] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.142837] pci_bus 0000:07: resource 1 [mem 0x93100000-0x931fffff] [ 0.142840] pci_bus 0000:07: resource 4 [io 0x0000-0xffff] [ 0.142842] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff] [ 0.142877] NET: Registered protocol family 2 [ 0.143084] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.143269] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.143420] TCP: Hash tables configured (established 16384 bind 16384) [ 0.143513] TCP: reno registered [ 0.143568] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.143640] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.143752] NET: Registered protocol family 1 [ 0.144217] pci 0000:01:00.0: Boot video device [ 0.144323] PCI: CLS 64 bytes, default 64 [ 0.144366] Trying to unpack rootfs image as initramfs... [ 0.443923] Freeing initrd memory: 16712k freed [ 0.450346] Initialise module verification [ 0.450452] audit: initializing netlink socket (disabled) [ 0.450519] type=2000 audit(1404393012.447:1): initialized [ 0.480880] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.482565] VFS: Disk quotas dquot_6.5.2 [ 0.483767] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.484367] fuse init (API version 7.20) [ 0.484499] msgmni has been set to 3963 [ 0.484985] Key type asymmetric registered [ 0.485039] Asymmetric key parser 'x509' registered [ 0.485124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.485225] io scheduler noop registered [ 0.485279] io scheduler deadline registered (default) [ 0.485336] io scheduler cfq registered [ 0.485528] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.485599] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.485681] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.485760] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.485839] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.485916] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X [ 0.485985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.486053] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.486157] intel_idle: does not run on family 6 model 15 [ 0.486233] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.486309] ACPI: Sleep Button [SLPB] [ 0.486407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.486478] ACPI: Power Button [PWRF] [ 0.486608] ACPI: Requesting acpi_cpufreq [ 0.486869] Monitor-Mwait will be used to enter C-1 state [ 0.488984] GHES: HEST is not enabled! [ 0.489117] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.509526] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.510880] Linux agpgart interface v0.103 [ 0.512307] brd: module loaded [ 0.513049] loop: module loaded [ 0.513460] libphy: Fixed MDIO Bus: probed [ 0.513579] tun: Universal TUN/TAP device driver, 1.6 [ 0.513633] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.513727] PPP generic driver version 2.4.2 [ 0.513833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.513889] ehci-pci: EHCI PCI platform driver [ 0.513974] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 0.513978] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.514038] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.514119] ehci-pci 0000:00:1a.7: debug port 1 [ 0.518064] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.518081] ehci-pci 0000:00:1a.7: irq 17, io mem 0x93325c00 [ 0.528026] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.528104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.528162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.528234] usb usb1: Product: EHCI Host Controller [ 0.528293] usb usb1: Manufacturer: Linux 3.8.0-38-generic ehci_hcd [ 0.528349] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.528492] hub 1-0:1.0: USB hub found [ 0.528547] hub 1-0:1.0: 6 ports detected [ 0.528714] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.528718] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.528775] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.528855] ehci-pci 0000:00:1d.7: debug port 1 [ 0.532807] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.532820] ehci-pci 0000:00:1d.7: irq 23, io mem 0x93325800 [ 0.544030] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.544117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.544176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.544253] usb usb2: Product: EHCI Host Controller [ 0.544306] usb usb2: Manufacturer: Linux 3.8.0-38-generic ehci_hcd [ 0.544362] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.544497] hub 2-0:1.0: USB hub found [ 0.544551] hub 2-0:1.0: 6 ports detected [ 0.544714] ehci-pci 0000:07:00.2: EHCI Host Controller [ 0.544772] ehci-pci 0000:07:00.2: new USB bus registered, assigned bus number 3 [ 0.544869] ehci-pci 0000:07:00.2: irq 23, io mem 0x93104900 [ 0.556031] ehci-pci 0000:07:00.2: USB 2.0 started, EHCI 1.00 [ 0.556105] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.556163] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.556240] usb usb3: Product: EHCI Host Controller [ 0.556294] usb usb3: Manufacturer: Linux 3.8.0-38-generic ehci_hcd [ 0.556350] usb usb3: SerialNumber: 0000:07:00.2 [ 0.556485] hub 3-0:1.0: USB hub found [ 0.556539] hub 3-0:1.0: 2 ports detected [ 0.556663] ehci-pci 0000:07:01.2: EHCI Host Controller [ 0.556721] ehci-pci 0000:07:01.2: new USB bus registered, assigned bus number 4 [ 0.556824] ehci-pci 0000:07:01.2: irq 20, io mem 0x93104800 [ 0.568031] ehci-pci 0000:07:01.2: USB 2.0 started, EHCI 1.00 [ 0.568113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.568172] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.568249] usb usb4: Product: EHCI Host Controller [ 0.568302] usb usb4: Manufacturer: Linux 3.8.0-38-generic ehci_hcd [ 0.568358] usb usb4: SerialNumber: 0000:07:01.2 [ 0.568493] hub 4-0:1.0: USB hub found [ 0.568547] hub 4-0:1.0: 4 ports detected [ 0.568678] ehci-platform: EHCI generic platform driver [ 0.568739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.568809] uhci_hcd: USB Universal Host Controller Interface driver [ 0.568881] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.568884] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.568942] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5 [ 0.569039] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040e0 [ 0.569120] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.569178] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.569248] usb usb5: Product: UHCI Host Controller [ 0.569302] usb usb5: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.569358] usb usb5: SerialNumber: 0000:00:1a.0 [ 0.569493] hub 5-0:1.0: USB hub found [ 0.569547] hub 5-0:1.0: 2 ports detected [ 0.569668] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.569671] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.569728] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6 [ 0.569825] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0 [ 0.569908] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.569965] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.570036] usb usb6: Product: UHCI Host Controller [ 0.570089] usb usb6: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.570145] usb usb6: SerialNumber: 0000:00:1a.1 [ 0.570276] hub 6-0:1.0: USB hub found [ 0.570330] hub 6-0:1.0: 2 ports detected [ 0.570454] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.570458] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.570515] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7 [ 0.570604] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000040a0 [ 0.570687] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.570745] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.570815] usb usb7: Product: UHCI Host Controller [ 0.570869] usb usb7: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.570925] usb usb7: SerialNumber: 0000:00:1a.2 [ 0.571062] hub 7-0:1.0: USB hub found [ 0.571116] hub 7-0:1.0: 2 ports detected [ 0.571235] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.571238] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.571295] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 [ 0.571384] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 0.571466] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.571524] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.571594] usb usb8: Product: UHCI Host Controller [ 0.571648] usb usb8: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.571704] usb usb8: SerialNumber: 0000:00:1d.0 [ 0.571832] hub 8-0:1.0: USB hub found [ 0.571886] hub 8-0:1.0: 2 ports detected [ 0.572017] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.572020] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.572088] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 [ 0.572185] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 0.572266] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.572323] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.572394] usb usb9: Product: UHCI Host Controller [ 0.572447] usb usb9: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.572503] usb usb9: SerialNumber: 0000:00:1d.1 [ 0.572637] hub 9-0:1.0: USB hub found [ 0.572691] hub 9-0:1.0: 2 ports detected [ 0.572813] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.572816] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.572873] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [ 0.572962] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 0.573043] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.573101] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.573171] usb usb10: Product: UHCI Host Controller [ 0.573225] usb usb10: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.573281] usb usb10: SerialNumber: 0000:00:1d.2 [ 0.573412] hub 10-0:1.0: USB hub found [ 0.573466] hub 10-0:1.0: 2 ports detected [ 0.573587] uhci_hcd 0000:07:00.0: UHCI Host Controller [ 0.573644] uhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 11 [ 0.573735] uhci_hcd 0000:07:00.0: irq 21, io base 0x00001040 [ 0.573817] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.573874] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.573945] usb usb11: Product: UHCI Host Controller [ 0.573999] usb usb11: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.574055] usb usb11: SerialNumber: 0000:07:00.0 [ 0.574185] hub 11-0:1.0: USB hub found [ 0.574239] hub 11-0:1.0: 2 ports detected [ 0.574361] uhci_hcd 0000:07:01.0: UHCI Host Controller [ 0.574420] uhci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 12 [ 0.574519] uhci_hcd 0000:07:01.0: irq 22, io base 0x00001020 [ 0.574601] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.574658] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.574729] usb usb12: Product: UHCI Host Controller [ 0.575893] usb usb12: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.575949] usb usb12: SerialNumber: 0000:07:01.0 [ 0.576093] hub 12-0:1.0: USB hub found [ 0.576147] hub 12-0:1.0: 2 ports detected [ 0.576266] uhci_hcd 0000:07:01.1: UHCI Host Controller [ 0.576324] uhci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 13 [ 0.576413] uhci_hcd 0000:07:01.1: irq 21, io base 0x00001000 [ 0.576495] usb usb13: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.576553] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.576623] usb usb13: Product: UHCI Host Controller [ 0.576677] usb usb13: Manufacturer: Linux 3.8.0-38-generic uhci_hcd [ 0.576733] usb usb13: SerialNumber: 0000:07:01.1 [ 0.576868] hub 13-0:1.0: USB hub found [ 0.576922] hub 13-0:1.0: 2 ports detected [ 0.577093] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.580293] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.580353] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.580514] mousedev: PS/2 mouse device common for all mice [ 0.580688] rtc_cmos 00:02: RTC can wake from S4 [ 0.580844] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.580918] rtc0: alarms up to one month, 114 bytes nvram [ 0.581060] device-mapper: uevent: version 1.0.3 [ 0.581171] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@xxxxxxxxxx [ 0.581249] cpuidle: using governor ladder [ 0.581301] cpuidle: using governor menu [ 0.581354] ledtrig-cpu: registered to indicate activity on CPUs [ 0.581409] EFI Variables Facility v0.08 2004-May-17 [ 0.581649] ashmem: initialized [ 0.581811] TCP: cubic registered [ 0.581963] NET: Registered protocol family 10 [ 0.582186] NET: Registered protocol family 17 [ 0.582249] Key type dns_resolver registered [ 0.582492] Loading module verification certificates [ 0.583614] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a3011e4e8f874734b1f26672fda04dadcdf86f9b' [ 0.583700] registered taskstats version 1 [ 0.585890] Key type trusted registered [ 0.587739] Key type encrypted registered [ 0.590005] rtc_cmos 00:02: setting system clock to 2014-07-03 13:10:12 UTC (1404393012) [ 0.590296] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.590352] EDD information not available. [ 0.592187] Freeing unused kernel memory: 1016k freed [ 0.592488] Write protecting the kernel read-only data: 12288k [ 0.595758] Freeing unused kernel memory: 1000k freed [ 0.599067] Freeing unused kernel memory: 952k freed [ 0.614187] udevd[95]: starting version 175 [ 0.665256] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 0.665317] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 0.665410] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.665484] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.665591] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 0.674630] scsi0 : pata_marvell [ 0.679201] scsi1 : pata_marvell [ 0.679308] ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17 [ 0.679366] ata2: DUMMY [ 0.764071] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 0.900049] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 0.969975] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:22:1d:46 [ 0.970049] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.970126] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF [ 0.970207] ahci 0000:00:1f.2: version 3.0 [ 0.970266] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X [ 0.970344] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.970421] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems [ 0.970505] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.008545] scsi2 : ahci [ 1.008674] scsi3 : ahci [ 1.008790] scsi4 : ahci [ 1.008906] scsi5 : ahci [ 1.009021] scsi6 : ahci [ 1.009131] scsi7 : ahci [ 1.009250] ata3: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325100 irq 47 [ 1.009321] ata4: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325180 irq 47 [ 1.009392] ata5: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325200 irq 47 [ 1.009463] ata6: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325280 irq 47 [ 1.009533] ata7: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325300 irq 47 [ 1.009604] ata8: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325380 irq 47 [ 1.032438] usb 1-2: New USB device found, idVendor=0424, idProduct=2514 [ 1.032497] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.032710] hub 1-2:1.0: USB hub found [ 1.032807] hub 1-2:1.0: 4 ports detected [ 1.264102] firewire_core 0000:07:03.0: created device fw0: GUID 0090270001fd63fb, S400 [ 1.328056] ata5: SATA link down (SStatus 0 SControl 300) [ 1.328125] ata6: SATA link down (SStatus 0 SControl 300) [ 1.448056] tsc: Refined TSC clocksource calibration: 2333.067 MHz [ 1.448116] Switching to clocksource tsc [ 1.500023] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.500091] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.500156] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.500660] ata7.00: ATA-9: WDC WD30EURS-73TLHY0, 80.00A80, max UDMA/133 [ 1.500720] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.500837] ata3.00: ATA-9: WDC WD30EURS-73TLHY0, 80.00A80, max UDMA/133 [ 1.500895] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.501319] ata7.00: configured for UDMA/133 [ 1.501486] ata3.00: configured for UDMA/133 [ 1.501646] scsi 2:0:0:0: Direct-Access ATA WDC WD30EURS-73T 80.0 PQ: 0 ANSI: 5 [ 1.501856] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 1.501881] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.501990] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 1.502086] sd 2:0:0:0: [sda] Write Protect is off [ 1.502140] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.502159] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.511315] ata8.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133 [ 1.511373] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.512036] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.521701] ata8.00: configured for UDMA/133 [ 1.586356] sda: sda1 [ 1.586615] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.654195] usb 3-1: New USB device found, idVendor=0413, idProduct=6f12 [ 1.654255] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.654315] usb 3-1: Product: WinFast DTV2000 DS Plus [ 1.654371] usb 3-1: Manufacturer: Realtek [ 1.668028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.669485] ata4.00: ATAPI: PIONEER DVD-RW DVR-215, 1.13, max UDMA/66 [ 1.671002] ata4.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 1.695129] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.13 PQ: 0 ANSI: 5 [ 1.713124] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.713197] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.713361] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.713420] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.713609] scsi 6:0:0:0: Direct-Access ATA WDC WD30EURS-73T 80.0 PQ: 0 ANSI: 5 [ 1.713786] sd 6:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 1.713860] sd 6:0:0:0: [sdb] 4096-byte physical blocks [ 1.713940] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1.713966] sd 6:0:0:0: [sdb] Write Protect is off [ 1.713968] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.713988] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.714218] scsi 7:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5 [ 1.714405] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 1.714495] sd 7:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.714644] sd 7:0:0:0: [sdc] Write Protect is off [ 1.714700] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.714724] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.716464] sdc: sdc1 sdc2 [ 1.716788] sd 7:0:0:0: [sdc] Attached SCSI disk [ 1.768030] usb 3-2: new high-speed USB device number 3 using ehci-pci [ 1.796618] sdb: sdb1 [ 1.796900] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.956154] bio: create slab <bio-1> at 1 [ 1.990243] usb 3-2: New USB device found, idVendor=0413, idProduct=6f12 [ 1.990306] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.990367] usb 3-2: Product: WinFast DTV2000 DS Plus [ 1.990434] usb 3-2: Manufacturer: Realtek [ 2.104084] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 2.237868] usb 4-1: New USB device found, idVendor=0fe9, idProduct=db78 [ 2.237933] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 2.238007] usb 4-1: Product: Bluebird [ 2.238061] usb 4-1: Manufacturer: Dvico [ 2.238115] usb 4-1: SerialNumber: 0000827b [ 2.348033] usb 4-2: new high-speed USB device number 3 using ehci-pci [ 2.522028] usb 4-2: New USB device found, idVendor=0fe9, idProduct=db78 [ 2.522090] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 2.522152] usb 4-2: Product: Bluebird [ 2.522206] usb 4-2: Manufacturer: Dvico [ 2.522266] usb 4-2: SerialNumber: 0000027b [ 2.760025] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 2.936126] usb 5-1: New USB device found, idVendor=413c, idProduct=2107 [ 2.937303] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.937361] usb 5-1: Product: Dell USB Entry Keyboard [ 2.937417] usb 5-1: Manufacturer: Dell [ 2.961178] usbcore: registered new interface driver usbhid [ 2.961240] usbhid: USB HID core driver [ 2.964344] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.0/input/input2 [ 2.964853] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1a.0-1/input0 [ 3.180036] usb 6-2: new low-speed USB device number 2 using uhci_hcd [ 3.361915] usb 6-2: New USB device found, idVendor=045e, idProduct=0040 [ 3.361976] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.362035] usb 6-2: Product: Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae [ 3.362092] usb 6-2: Manufacturer: Microsoft [ 3.380238] input: Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/input/input3 [ 3.380410] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:1a.1-2/input0 [ 3.824028] usb 10-1: new low-speed USB device number 2 using uhci_hcd [ 3.979052] usb 10-1: New USB device found, idVendor=15c2, idProduct=ffdc [ 3.979113] usb 10-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.839872] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 6.943823] init: ureadahead main process (347) terminated with status 5 [ 7.039423] Adding 3903484k swap on /dev/mapper/welly-swap. Priority:-1 extents:1 across:3903484k SS [ 7.046386] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.055036] udevd[480]: starting version 175 [ 7.091836] lp: driver loaded but no devices found [ 7.143105] mei 0000:00:03.0: setting latency timer to 64 [ 7.143150] mei 0000:00:03.0: irq 48 for MSI/MSI-X [ 7.213541] Disabling lock debugging due to kernel taint [ 7.213910] WARNING: You are using an experimental version of the media stack. [ 7.213910] As the driver is backported to an older kernel, it doesn't offer [ 7.213910] enough quality for its usage in production. [ 7.213910] Use it with care. [ 7.213910] Latest git patches (needed if you report a bug to linux-media@xxxxxxxxxxxxxxx): [ 7.213910] b5b620584b9c4644b85e932895a742e0c192d66c [media] technisat-sub2: Fix stream curruption on high bitrate [ 7.213910] 1fe3a8fe494463cfe2556a25ae41a1499725c178 [media] au0828: don't hardcode height/width [ 7.213910] 64ea37bbd8a5815522706f0099ad3f11c7537e15 [media] au0828: Only alt setting logic when needed [ 7.216664] input: iMON Panel, Knob and Mouse(15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input4 [ 7.240022] imon 10-1:1.0: 0xffdc iMON LCD, MCE IR [ 7.240026] (id 0x9f) [ 7.264168] nvidia: module license 'NVIDIA' taints kernel. [ 7.283068] Registered IR keymap rc-imon-mce [ 7.283251] input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/rc/rc0/input5 [ 7.283303] rc0: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/rc/rc0 [ 7.283732] type=1400 audit(1404393019.186:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=583 comm="apparmor_parser" [ 7.284167] type=1400 audit(1404393019.190:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser" [ 7.284398] type=1400 audit(1404393019.190:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser" [ 7.293733] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.294067] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.116 Mon Oct 28 20:39:03 PDT 2013 [ 7.294708] type=1400 audit(1404393019.198:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=594 comm="apparmor_parser" [ 7.296981] imon 10-1:1.0: iMON device (15c2:ffdc, intf0) on usb<10:2> initialized [ 7.297028] usbcore: registered new interface driver imon [ 7.312794] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \IGPO 1 (20121018/utaddress-251) [ 7.312802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.342291] WARNING: You are using an experimental version of the media stack. [ 7.342291] As the driver is backported to an older kernel, it doesn't offer [ 7.342291] enough quality for its usage in production. [ 7.342291] Use it with care. [ 7.342291] Latest git patches (needed if you report a bug to linux-media@xxxxxxxxxxxxxxx): [ 7.342291] b5b620584b9c4644b85e932895a742e0c192d66c [media] technisat-sub2: Fix stream curruption on high bitrate [ 7.342291] 1fe3a8fe494463cfe2556a25ae41a1499725c178 [media] au0828: don't hardcode height/width [ 7.342291] 64ea37bbd8a5815522706f0099ad3f11c7537e15 [media] au0828: Only alt setting logic when needed [ 7.346769] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state. [ 7.347003] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 7.378165] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4) [ 7.428051] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb3 [ 7.430814] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 7.456089] hda_codec: ALC888: SKU not ready 0x411111f0 [ 7.486670] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 7.487458] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 7.487961] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 7.488542] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.489237] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.491758] hda_intel: Disabling MSI [ 7.491770] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 7.593377] usb 4-1: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 7.607952] xc2028 0-0061: creating new instance [ 7.607956] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 7.608725] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 7.608796] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:07:01.2/usb4/4-1/input/input11 [ 7.609438] dvb-usb: schedule remote query interval to 100 msecs. [ 7.609577] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initialized and connected. [ 7.609601] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state. [ 7.610117] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 7.639237] gpio_ich: GPIO from 195 to 255 on gpio_ich [ 7.640862] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4) [ 7.653863] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb3 [ 7.666506] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 7.688469] cxusb: No IR receiver detected on this device. [ 7.688477] usb 4-2: DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)... [ 7.688617] xc2028 1-0061: creating new instance [ 7.688620] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 7.688700] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 7.692793] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initialized and connected. [ 7.692837] usbcore: registered new interface driver dvb_usb_cxusb [ 7.696187] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 7.701327] coretemp coretemp.0: Using relative temperature scale! [ 7.701356] coretemp coretemp.0: Using relative temperature scale! [ 7.800160] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 7.800256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.924426] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [ 7.961503] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.975619] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 7.986499] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 7.995089] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 8.093133] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 8.131774] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 8.236994] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 8.297467] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.302241] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 8.308146] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 8.308360] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 8.308511] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 8.308657] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 8.396608] init: udev-fallback-graphics main process (995) terminated with status 1 [ 9.044891] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.044898] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 9.044927] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.964606] init: failsafe main process (1020) killed by TERM signal [ 11.019602] type=1400 audit(1404393022.922:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1333 comm="apparmor_parser" [ 11.020227] type=1400 audit(1404393022.926:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1333 comm="apparmor_parser" [ 11.020457] type=1400 audit(1404393022.926:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1333 comm="apparmor_parser" [ 11.024597] type=1400 audit(1404393022.930:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1335 comm="apparmor_parser" [ 11.025150] type=1400 audit(1404393022.930:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1332 comm="apparmor_parser" [ 11.029241] type=1400 audit(1404393022.934:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1336 comm="apparmor_parser" [ 11.177388] imon 10-1:1.0: Looks like you're trying to use an IR protocol this device does not support [ 11.177392] imon 10-1:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol [ 11.370636] Bridge firewalling registered [ 11.430063] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.520881] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.563754] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 12.227377] Ebtables v2.0 registered [ 12.249522] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.276404] cgroup: libvirtd (1539) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 12.276407] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 12.276452] cgroup: libvirtd (1539) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 12.276507] cgroup: libvirtd (1539) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 13.844421] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 15.374285] init: plymouth-stop pre-start process (2749) terminated with status 1 [ 15.604159] xc2028 0-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 15.631529] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 15.824328] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 17.535571] xc2028 1-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 17.562332] xc2028 1-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 260.268408] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 261.988655] xc2028 0-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 262.015032] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
