On 07/14/2014 09:55 PM, Antti Palosaari wrote: > Moikka Hans! > > On 07/14/2014 10:34 PM, Hans Verkuil wrote: >> On 07/14/2014 09:27 PM, Antti Palosaari wrote: >>> AirSpy SDR driver. >>> >>> Thanks to Youssef Touil and Benjamin Vernoux for support, help and >>> hardware! >>> http://airspy.com/ >>> >>> Signed-off-by: Antti Palosaari <crope@xxxxxx> >>> --- >>> drivers/staging/media/Kconfig | 1 + >>> drivers/staging/media/Makefile | 1 + >>> drivers/staging/media/airspy/Kconfig | 5 + >>> drivers/staging/media/airspy/Makefile | 1 + >>> drivers/staging/media/airspy/airspy.c | 1120 +++++++++++++++++++++++++++++++++ >>> 5 files changed, 1128 insertions(+) >>> create mode 100644 drivers/staging/media/airspy/Kconfig >>> create mode 100644 drivers/staging/media/airspy/Makefile >>> create mode 100644 drivers/staging/media/airspy/airspy.c >>> >> >> It's a new driver, so the usual question: can you post the output from the >> latest v4l2-compliance? 'v4l2-compliance -S /dev/swradioX -s' >> >> It looks good, but I always like to see the output of that as a record and >> as a verification that someone actually ran it :-) > > I actually ran v4l2-compliance and there was problem with ADC band > enumeration. v4l2-compliance didn't liked as ADC freq was just 20MHz, > both upper and lower limit. Due to that I added even small hack to driver, > > + .rangelow = 20000000, > + .rangehigh = 20000001, /* FIXME: make v4l2-compliance happy */ Hmm, does the latest v4l2-compliance (direct from the git repo) still fail on that? That shouldn't be a problem, and I don't see that here either if I try that myself. If it still fails, can you show me the error message? > But here is new ran, brand new v4l2-compliance: Thanks, 0 fails, that's what I like to see :-) Regards, Hans > > [crope@localhost v4l-utils]$ which v4l2-compliance > /usr/local/bin/v4l2-compliance > [crope@localhost v4l-utils]$ ls -l /usr/local/bin/v4l2-compliance > -rwxr-xr-x. 1 root root 1497964 Jul 14 22:50 /usr/local/bin/v4l2-compliance > [crope@localhost v4l-utils]$ /usr/local/bin/v4l2-compliance -S > /dev/swradio0 -s > Driver Info: > Driver name : airspy > Card type : AirSpy SDR > Bus info : usb-0000:00:13.2-1 > Driver version: 3.15.0 > Capabilities : 0x85110000 > SDR Capture > Tuner > Read/Write > Streaming > Device Capabilities > Device Caps : 0x05110000 > SDR Capture > Tuner > Read/Write > Streaming > > Compliance test for device /dev/swradio0 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second sdr open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER: OK > test VIDIOC_G/S_FREQUENCY: OK > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 2 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERYCTRL/MENU: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 6 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK (Not Supported) > > Streaming ioctls: > test read/write: OK > test MMAP: OK > test USERPTR: OK > test DMABUF: OK > > Total: 42, Succeeded: 42, Failed: 0, Warnings: 0 > [crope@localhost v4l-utils]$ > > regards > Antti > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
