I have the same issue with w_scan: http://pastebin.com/vCFD2972 On Wed, Jul 9, 2014 at 12:28 PM, Quentin Denis <quentin.denis@xxxxxxxxx> wrote: > Hi all, > > I am running a Terratec DVB Cinergy T stick MKII under openSUSE and cannot find > all the channels available in my region (Brussels). I have all the channels > from on 482Mhz but none on 754mh, whereas on Windows I receive both. > > How can it be that it does not fully work under linux? Is there an > issue with the > driver? Neither kaffeine nor 'scan' will find it. The latter outputs a > tuning failure: > > quentin@linux-v3k0:~> scan be-All.txt > channels.conf > scanning be-All.txt > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 754000000 0 3 9 1 1 3 0 > initial transponder 482000000 0 1 9 3 1 3 0 > initial transponder 506000000 0 1 9 3 1 3 0 > initial transponder 666000000 0 3 9 1 1 3 0 > initial transponder 834000000 0 3 9 1 1 3 0 >>>> tune to: > 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > WARNING: >>> tuning failed!!! >>>> tune to: > 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!! >>>> tune to: > 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > Network Name 'VRTmux1' > 0x0001 0x1010: pmt_pid 0x1010 VRT -- EEN (running) > 0x0001 0x1020: pmt_pid 0x1020 VRT -- Canvas (running) > 0x0001 0x1030: pmt_pid 0x1030 VRT -- Ketnet op 12 (running) > 0x0001 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running) > 0x0001 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running) > 0x0001 0x1060: pmt_pid 0x1060 VRT -- Klara (running) > 0x0001 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running) > 0x0001 0x1080: pmt_pid 0x1080 VRT -- MNM (running) > 0x0001 0x1090: pmt_pid 0x1090 VRT -- Klara Continuo (running) > 0x0001 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running) > 0x0001 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running) > 0x0001 0x10d0: pmt_pid 0x10d0 VRT -- MNM Hits (running) >>>> tune to: > 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > WARNING: >>> tuning failed!!! >>>> tune to: > 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!! >>>> tune to: > 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > WARNING: >>> tuning failed!!! >>>> tune to: > 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!! >>>> tune to: > 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > WARNING: >>> tuning failed!!! >>>> tune to: > 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!! > dumping lists (12 services) > Done. > > Best regards, > Quentin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
