As promised results on the 9033 driver (with the patch to fix the tuner id/eeprom thingy): 3.42: Jun 26 19:30:56 crystal kernel: [ 102.250152] i2c i2c-11: af9033: firmware version: LINK=0.0.0.0 OFDM=3.29.3.3 root@crystal:~# tzap -c ~mythtv/channels -a 2 ONE using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' reading channels from file '/home/mythtv/channels' tuning to 219500000 Hz video pid 0x0202, audio pid 0x0000 status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0078 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0096 | ber 00000000 | unc 00000000 | ^C root@crystal:~# tzap -c ~mythtv/channels -a 3 ONE using '/dev/dvb/adapter3/frontend0' and '/dev/dvb/adapter3/demux0' reading channels from file '/home/mythtv/channels' tuning to 219500000 Hz video pid 0x0202, audio pid 0x0000 status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0046 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0046 | ber 73ffffe3 | unc 0000270f | status 07 | signal ffff | snr 0000 | ber 73ffffe3 | unc 00004e1e | status 00 | signal ffff | snr 0046 | ber 73ffffe3 | unc 0000752d | status 07 | signal ffff | snr 0000 | ber 73ffffe3 | unc 00009c3c | status 00 | signal ffff | snr 0046 | ber ffffffff | unc 0000c34c | 3.40: Jun 26 19:35:06 crystal kernel: [ 71.134391] i2c i2c-11: af9033: firmware version: LINK=0.0.0.0 OFDM=3.17.1.0 root@crystal:~# tzap -c ~mythtv/channels -a 2 ONE using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' reading channels from file '/home/mythtv/channels' tuning to 219500000 Hz video pid 0x0202, audio pid 0x0000 status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0078 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0078 | ber 00000000 | unc 00002685 | status 07 | signal ffff | snr 0000 | ber 00000000 | unc 00004d0a | status 00 | signal ffff | snr 008c | ber 00000000 | unc 0000738f | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00009a14 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 0000c099 | status 07 | signal ffff | snr 0078 | ber 00000000 | unc 0000e71e | status 00 | signal ffff | snr 0078 | ber ffffffff | unc 00010e2e | status 1f | signal ffff | snr 0000 | ber ffffffff | unc 0001353e | FE_HAS_LOCK status 00 | signal ffff | snr 0122 | ber ffffffff | unc 00015c4e | status 07 | signal ffff | snr 0078 | ber ffffffff | unc 0001835e | status 00 | signal ffff | snr 000a | ber ffffffff | unc 0001aa6e | status 07 | signal ffff | snr 0000 | ber ffffffff | unc 0001d17e | ^C root@crystal:~# tzap -c ~mythtv/channels -a 3 ONE using '/dev/dvb/adapter3/frontend0' and '/dev/dvb/adapter3/demux0' reading channels from file '/home/mythtv/channels' tuning to 219500000 Hz video pid 0x0202, audio pid 0x0000 status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 00aa | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0096 | ber 00000000 | unc 00000000 | status 07 | signal ffff | snr 0046 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0046 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0046 | ber 00000000 | unc 00000000 | status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 001e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 07 | signal ffff | snr 00aa | ber 00000000 | unc 0000211c | status 07 | signal ffff | snr 00aa | ber ffffffff | unc 0000482c | status 07 | signal ffff | snr 0000 | ber 76aaaa8d | unc 00006f39 | status 07 | signal ffff | snr 0046 | ber 76aaaa8d | unc 00009646 | status 07 | signal ffff | snr 0046 | ber ffffffff | unc 0000bd56 | status 07 | signal ffff | snr 0000 | ber ffffffff | unc 0000e466 | status 07 | signal ffff | snr 0046 | ber ffffffff | unc 00010b76 | status 1f | signal ffff | snr 0118 | ber ffffffff | unc 00013286 | FE_HAS_LOCK status 1f | signal ffff | snr 00dc | ber ffffffff | unc 00015996 | FE_HAS_LOCK status 07 | signal ffff | snr 00aa | ber ffffffff | unc 000180a6 | status 07 | signal ffff | snr 00aa | ber ffffffff | unc 0001a7b6 | ^C stock kernel driver (ftp/extract from ite.com.tw): Jun 26 19:38:31 crystal kernel: [ 276.422317] i2c i2c-11: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0 root@crystal:/lib/firmware# tzap -c ~mythtv/channels -a 2 ONE using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' reading channels from file '/home/mythtv/channels' tuning to 219500000 Hz video pid 0x0202, audio pid 0x0000 status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 082496b0 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 06a6ca1a | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 05336f08 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 05c002a6 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 03d55fd6 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 04a8b336 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 05c05148 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 06a6470c | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 00d2 | ber 04e7df5c | unc 00000000 | FE_HAS_LOCK ^C root@crystal:/lib/firmware# tzap -c ~mythtv/channels -a 3 ONE using '/dev/dvb/adapter3/frontend0' and '/dev/dvb/adapter3/demux0' reading channels from file '/home/mythtv/channels' tuning to 219500000 Hz video pid 0x0202, audio pid 0x0000 status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ffff | snr 0104 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0104 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0122 | ber 00000000 | unc 00000000 | FE_HAS_LOCK ^C As you can see the stock kernel/download-extract file gives best lock. The 3.42 doesn't lock at all, and the 3.40 has a hard time maintaining the lock. I will retest after new antenna goes on :) Regards David On 25 June 2014 22:59, David Shirley <tephra@xxxxxxxxx> wrote: > With the IT913X driver: > > I found that IT9135v2_3.42.3.3_3.29.3.3 wouldn't tune at all and > IT9135v2_3.40.1.0_3.17.1.0 appeared to be less happy to tune (rightly > so if the reception from the "kernel driver" (ie the one the script > ftp's and extracts) is anything to go by) > > I will retest now that i'm on the AF9035 driver, give me a few days :) > > On 25 June 2014 21:46, Antti Palosaari <crope@xxxxxx> wrote: >> On 06/25/2014 01:32 PM, David Shirley wrote: >>> >>> Patched vanilla 3.15.1, this is the dmesg: >>> >>> Jun 25 20:16:16 crystal kernel: [ 136.546403] usb 3-4.1.2: new >>> high-speed USB device number 9 using xhci_hcd >>> Jun 25 20:16:16 crystal kernel: [ 136.634428] usb 3-4.1.2: New USB >>> device found, idVendor=0413, idProduct=6a05 >>> Jun 25 20:16:16 crystal kernel: [ 136.634435] usb 3-4.1.2: New USB >>> device strings: Mfr=1, Product=2, SerialNumber=0 >>> Jun 25 20:16:16 crystal kernel: [ 136.634438] usb 3-4.1.2: Product: >>> WinFast DTV Dongle Dual >>> Jun 25 20:16:16 crystal kernel: [ 136.634441] usb 3-4.1.2: >>> Manufacturer: Leadtek >>> Jun 25 20:16:16 crystal kernel: [ 136.643754] usb 3-4.1.2: >>> dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135 >>> Jun 25 20:16:16 crystal kernel: [ 136.644100] usb 3-4.1.2: >>> dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in cold state >>> Jun 25 20:16:16 crystal kernel: [ 136.644429] usb 3-4.1.2: >>> dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw' >>> Jun 25 20:16:18 crystal kernel: [ 138.553335] usb 3-4.1.2: >>> dvb_usb_af9035: firmware version=3.39.1.0 >>> Jun 25 20:16:18 crystal kernel: [ 138.553350] usb 3-4.1.2: >>> dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in warm state >>> Jun 25 20:16:18 crystal kernel: [ 138.555176] usb 3-4.1.2: >>> dvb_usb_af9035: [0] overriding tuner from 38 to 60 >>> Jun 25 20:16:18 crystal kernel: [ 138.556515] usb 3-4.1.2: >>> dvb_usb_af9035: [1] overriding tuner from 38 to 60 >>> Jun 25 20:16:18 crystal kernel: [ 138.557900] usb 3-4.1.2: >>> dvb_usb_v2: will pass the complete MPEG2 transport stream to the >>> software demuxer >>> Jun 25 20:16:18 crystal kernel: [ 138.557957] DVB: registering new >>> adapter (Leadtek WinFast DTV Dongle Dual) >>> Jun 25 20:16:18 crystal kernel: [ 138.564417] i2c i2c-11: af9033: >>> firmware version: LINK=0.0.0.0 OFDM=3.9.1.0 >>> Jun 25 20:16:18 crystal kernel: [ 138.564446] usb 3-4.1.2: DVB: >>> registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))... >>> Jun 25 20:16:18 crystal kernel: [ 138.568091] i2c i2c-11: >>> tuner_it913x: ITE Tech IT913X successfully attached >>> Jun 25 20:16:18 crystal kernel: [ 138.568110] usb 3-4.1.2: >>> dvb_usb_v2: will pass the complete MPEG2 transport stream to the >>> software demuxer >>> Jun 25 20:16:18 crystal kernel: [ 138.568139] DVB: registering new >>> adapter (Leadtek WinFast DTV Dongle Dual) >>> Jun 25 20:16:18 crystal kernel: [ 138.580208] i2c i2c-11: af9033: >>> firmware version: LINK=0.0.0.0 OFDM=3.9.1.0 >>> Jun 25 20:16:18 crystal kernel: [ 138.580219] usb 3-4.1.2: DVB: >>> registering adapter 3 frontend 0 (Afatech AF9033 (DVB-T))... >>> Jun 25 20:16:18 crystal kernel: [ 138.580364] i2c i2c-11: >>> tuner_it913x: ITE Tech IT913X successfully attached >>> Jun 25 20:16:18 crystal kernel: [ 138.591871] Registered IR keymap >>> rc-empty >>> Jun 25 20:16:18 crystal kernel: [ 138.591995] input: Leadtek WinFast >>> DTV Dongle Dual as >>> /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.2/rc/rc2/input11 >>> Jun 25 20:16:18 crystal kernel: [ 138.592069] rc2: Leadtek WinFast >>> DTV Dongle Dual as >>> /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.2/rc/rc2 >>> Jun 25 20:16:18 crystal kernel: [ 138.592075] usb 3-4.1.2: >>> dvb_usb_v2: schedule remote query interval to 500 msecs >>> Jun 25 20:16:18 crystal kernel: [ 138.592078] usb 3-4.1.2: >>> dvb_usb_v2: 'Leadtek WinFast DTV Dongle Dual' successfully initialized >>> and connected >>> Jun 25 20:16:18 crystal kernel: [ 138.592113] usbcore: registered new >>> interface driver dvb_usb_af9035 >>> >>> I can confirm that this tuner now works on the 9035 driver. >>> >>> However, im not sure if its the tuner thats just crap or my signal >>> strength, as an AF9013 can tune and get ok reception, but this IT913X >>> can tune but barely maintain a good picture. ITE say this particular >>> tuner requires 2db more so I guess its feasible my 9013's are right on >>> the border and the 9137 just cant "do it" :) >>> >>> I have a new antenna going in on the weekend so I will report back then! >> >> >> Could you test newer firmwares? I have dumped out those initialization >> register tables from Windows driver version 12.07.06.1. Newer firmwares are >> dumped out from Windows driver version 12.10.04.1. Due to that newer >> firmwares will work better with this driver - you were using the oldest >> firmware. I have got few reports newer or even newest firmware 3.42.3.3 - >> 3.29.3.3 works most best. >> >> http://palosaari.fi/linux/v4l-dvb/firmware/IT9135/12.10.04.1/ >> >> If that does not help I have to get IT9135 v2 dual device in order to fix >> it. >> >> regards >> Antti >> >> >> >> >>> >>> Merci! >>> D. >>> >>> On 24 June 2014 23:15, Antti Palosaari <crope@xxxxxx> wrote: >>>> >>>> Tuner ID set into EEPROM is wrong in some cases, which causes driver >>>> to select wrong tuner profile. That leads device non-working. Fix >>>> issue by overriding known bad tuner IDs with suitable default value. >>>> >>>> Cc: stable@xxxxxxxxxxxxxxx # v3.15+ >>>> Signed-off-by: Antti Palosaari <crope@xxxxxx> >>>> --- >>>> drivers/media/usb/dvb-usb-v2/af9035.c | 40 >>>> +++++++++++++++++++++++++++++------ >>>> 1 file changed, 33 insertions(+), 7 deletions(-) >>>> >>>> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c >>>> b/drivers/media/usb/dvb-usb-v2/af9035.c >>>> index 021e4d3..7b9b75f 100644 >>>> --- a/drivers/media/usb/dvb-usb-v2/af9035.c >>>> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c >>>> @@ -704,15 +704,41 @@ static int af9035_read_config(struct dvb_usb_device >>>> *d) >>>> if (ret < 0) >>>> goto err; >>>> >>>> - if (tmp == 0x00) >>>> - dev_dbg(&d->udev->dev, >>>> - "%s: [%d]tuner not set, using >>>> default\n", >>>> - __func__, i); >>>> - else >>>> + dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n", >>>> + __func__, i, tmp); >>>> + >>>> + /* tuner sanity check */ >>>> + if (state->chip_type == 0x9135) { >>>> + if (state->chip_version == 0x02) { >>>> + /* IT9135 BX (v2) */ >>>> + switch (tmp) { >>>> + case AF9033_TUNER_IT9135_60: >>>> + case AF9033_TUNER_IT9135_61: >>>> + case AF9033_TUNER_IT9135_62: >>>> + state->af9033_config[i].tuner = >>>> tmp; >>>> + break; >>>> + } >>>> + } else { >>>> + /* IT9135 AX (v1) */ >>>> + switch (tmp) { >>>> + case AF9033_TUNER_IT9135_38: >>>> + case AF9033_TUNER_IT9135_51: >>>> + case AF9033_TUNER_IT9135_52: >>>> + state->af9033_config[i].tuner = >>>> tmp; >>>> + break; >>>> + } >>>> + } >>>> + } else { >>>> + /* AF9035 */ >>>> state->af9033_config[i].tuner = tmp; >>>> + } >>>> >>>> - dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n", >>>> - __func__, i, >>>> state->af9033_config[i].tuner); >>>> + if (state->af9033_config[i].tuner != tmp) { >>>> + dev_info(&d->udev->dev, >>>> + "%s: [%d] overriding tuner from >>>> %02x to %02x\n", >>>> + KBUILD_MODNAME, i, tmp, >>>> + state->af9033_config[i].tuner); >>>> + } >>>> >>>> switch (state->af9033_config[i].tuner) { >>>> case AF9033_TUNER_TUA9001: >>>> -- >>>> 1.9.3 >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in >>>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> -- >> http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
