Add pinctrl definitions for i2c1 and i2c2 busses on the Lager board to ensure these are setup correctly at initialisation time. The i2c0 and i2c3 busses are connected to single function pins. Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/r8a7790-lager.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 8617755..4805c9f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -204,6 +204,16 @@ "msiof1_tx"; renesas,function = "msiof1"; }; + + i2c1_pins: i2c1 { + renesas,groups = "i2c1"; + renesas,function = "i2c1"; + }; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; }; ðer { @@ -324,10 +334,14 @@ &i2c1 { status = "ok"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; }; &i2c2 { status = "ok"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; }; &i2c3 { -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html