After confirming that it was supported I just bought a fusion hdtv dual express PCI adapter, only to find that I'd bought the 'dual express 2' version, which isn't supported (not the first time I've made such a mistake). This page http://www.linuxtv.org/wiki/index.php/DViCO_FusionHDTV_DVB-T_Dual_Express2 says that the new v2 card is still using CX23885 chipset but also uses DIB7070 (dib7000 + dib0070) which appears to be supported already but only via a few USB adapters. With a bit of cut and paste I have added some support for the card, to the point that dvbtune now says: # dvbtune -f 550500000 -bw 7 -c 2 -cr 3_4 -gi 16 -tm 8 -I 1 -m -i Using DVB card "DiBcom 7000PC" tuning DVB-T (in United Kingdom) to 550500000 Hz polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 0 Signal strength: 49390 SNR: 233 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC <transponder type="T" freq="550500000"> Nothing to read from fd_pat Nothing to read from fd_sdt </transponder> Signal=49402, Verror=0, SNR=228dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49397, Verror=0, SNR=226dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49377, Verror=0, SNR=235dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49336, Verror=0, SNR=230dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49345, Verror=0, SNR=235dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49374, Verror=0, SNR=232dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49352, Verror=0, SNR=254dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49396, Verror=0, SNR=241dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49344, Verror=0, SNR=243dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49353, Verror=0, SNR=258dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49309, Verror=0, SNR=248dB, BlockErrors=0, (S|L|C|V|SY|) Signal=49334, Verror=0, SNR=243dB, BlockErrors=0, (S|L|C|V|SY|) ^C Which all looks correct at the start, but obviously not as it can't actually read the information in the dvb streams. Is it likely that getting it working only requires a small amount of further tinkering, or am I likely wasting my time? I know next to nothing about dvb and how it all hangs together. Thanks James -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
