Hi All, Recently purchased one of these (0413:6a05), the instructions @ http://www.linuxtv.org/wiki/index.php/Leadtek_WinFast_DTV_Dual_Dongle appear to be wrong. Running 3.14.5 I didn't need to patch drivers/media/usb/dvb-usb-v2/af9035.c, however the tuner wouldn't work (it would be detected, but not able to tune) After a lot of stuffing around, I ended up patching it913x.c instead and everything is working well, here is my dmesg output: [ 3.981516] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 4.149345] usb 3-2: New USB device found, idVendor=0413, idProduct=6a05 [ 4.149355] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.149361] usb 3-2: Product: WinFast DTV Dongle Dual [ 4.149366] usb 3-2: Manufacturer: Leadtek [ 380.529378] it913x: Chip Version=02 Chip Type=9135 [ 380.530913] it913x: Remote propriety (raw) modeit913x: Dual mode=3 Tuner Type=38 [ 380.531310] it913x: Unknown tuner ID applying default 0x60it913x: Chip Version=02 Chip Type=9135 [ 380.637528] usb 3-2: dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in cold state [ 380.638195] usb 3-2: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw' [ 380.638598] it913x: FRM Starting Firmware Download [ 381.130961] it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=02 Chip Type=9135 [ 381.164104] it913x: Firmware Version 52887808<6> [ 381.226204] usb 3-2: dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in warm state [ 381.226300] usb 3-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 381.226519] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual) [ 381.231125] it913x-fe: ADF table value :00 [ 381.234465] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01 [ 381.262283] it913x-fe: Tuner LNA type :60 [ 381.493014] usb 3-2: DVB: registering adapter 0 frontend 0 (Leadtek WinFast DTV Dongle Dual_1)... [ 381.493251] usb 3-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 381.493446] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual) [ 381.494234] it913x-fe: ADF table value :00 [ 381.519335] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01 [ 381.750290] it913x-fe: Tuner LNA type :60 [ 382.280671] usb 3-2: DVB: registering adapter 1 frontend 0 (Leadtek WinFast DTV Dongle Dual_2)... [ 382.304097] IR keymap rc-it913x-v2 not found [ 382.304282] input: Leadtek WinFast DTV Dongle Dual as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0/input9 [ 382.304443] rc0: Leadtek WinFast DTV Dongle Dual as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0 [ 382.304453] usb 3-2: dvb_usb_v2: schedule remote query interval to 250 msecs [ 382.304462] usb 3-2: dvb_usb_v2: 'Leadtek WinFast DTV Dongle Dual' successfully initialized and connected [ 382.304551] usbcore: registered new interface driver dvb_usb_it913x My kernel config: CONFIG_DVB_USB_V2=m CONFIG_DVB_USB_IT913X=m CONFIG_DVB_IT913X_FE=m Do you want the output when it was using the af9035 driver? Regards David -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
