Re: [PATCH v5 04/49] media: davinci: vpif_display: release buffers in case start_streaming() call back fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/16/2014 03:33 PM, Lad, Prabhakar wrote:
> From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
> 
> this patch adds support to release the buffer by calling
> vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED
> if start_streaming() call back fails.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> ---
>  drivers/media/platform/davinci/vpif_display.c |   42 +++++++++++++++----------
>  1 file changed, 26 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
> index 8bb9f02..1a17a45 100644
> --- a/drivers/media/platform/davinci/vpif_display.c
> +++ b/drivers/media/platform/davinci/vpif_display.c
> @@ -196,26 +196,16 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	struct channel_obj *ch = vb2_get_drv_priv(vq);
>  	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
>  	struct vpif_params *vpif = &ch->vpifparams;
> -	unsigned long addr = 0;
> -	unsigned long flags;
> +	struct vpif_disp_buffer *buf, *tmp;
> +	unsigned long addr, flags;
>  	int ret;
>  
>  	spin_lock_irqsave(&common->irqlock, flags);
>  
> -	/* Get the next frame from the buffer queue */
> -	common->next_frm = common->cur_frm =
> -			    list_entry(common->dma_queue.next,
> -				       struct vpif_disp_buffer, list);
> -
> -	list_del(&common->cur_frm->list);
> -	spin_unlock_irqrestore(&common->irqlock, flags);
> -	/* Mark state of the current frame to active */
> -	common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE;
> -
>  	/* Initialize field_id and started member */
>  	ch->field_id = 0;
>  	common->started = 1;
> -	addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0);
> +
>  	/* Calculate the offset for Y and C data  in the buffer */
>  	vpif_calculate_offsets(ch);
>  
> @@ -225,7 +215,8 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		|| (!ch->vpifparams.std_info.frm_fmt
>  		&& (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) {
>  		vpif_err("conflict in field format and std format\n");
> -		return -EINVAL;
> +		ret = -EINVAL;
> +		goto err;
>  	}
>  
>  	/* clock settings */
> @@ -234,17 +225,28 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		ycmux_mode, ch->vpifparams.std_info.hd_sd);
>  		if (ret < 0) {
>  			vpif_err("can't set clock\n");
> -			return ret;
> +			goto err;
>  		}
>  	}
>  
>  	/* set the parameters and addresses */
>  	ret = vpif_set_video_params(vpif, ch->channel_id + 2);
>  	if (ret < 0)
> -		return ret;
> +		goto err;
>  
>  	common->started = ret;
>  	vpif_config_addr(ch, ret);
> +	/* Get the next frame from the buffer queue */
> +	common->next_frm = common->cur_frm =
> +			    list_entry(common->dma_queue.next,
> +				       struct vpif_disp_buffer, list);
> +
> +	list_del(&common->cur_frm->list);
> +	spin_unlock_irqrestore(&common->irqlock, flags);
> +	/* Mark state of the current frame to active */
> +	common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE;

There is no need to set this, all buffers queued to the driver are always in state
ACTIVE. The vb2 core sets that for you. In general drivers never need to change the
state manually.

It happens twice in this driver and in both cases the assignment can be removed.

Regards,

	Hans

> +
> +	addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0);
>  	common->set_addr((addr + common->ytop_off),
>  			    (addr + common->ybtm_off),
>  			    (addr + common->ctop_off),
> @@ -271,6 +273,14 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	}
>  
>  	return 0;
> +
> +err:
> +	list_for_each_entry_safe(buf, tmp, &common->dma_queue, list) {
> +		list_del(&buf->list);
> +		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
> +	}
> +
> +	return ret;
>  }
>  
>  /* abort streaming and wait for last buffer */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux