Em Sun, 27 Apr 2014 20:43:52 -0300 Roberto Alcantara <roberto@xxxxxxxxxxxxxx> escreveu: > Scan problem (not all) solved. > > Just to update thread, my backport driver was using MSG_SMS_GET_STATISTICS_REQ but firmware version for my isdb-t device do not respond. I need to use MSG_SMS_GET_STATISTICS_EX_REQ and handle MSG_SMS_GET_STATISTICS_EX_RES to get answer. Ah. Yeah, depending on the firmware, only one of those options is available. There is a code at the Siano driver that tries to detect it, but it seems that the logic there is not 100% (well, it works with the devices I have, but I don't have much Siano samples). Maybe we could add a different strategy: - test first if MSG_SMS_GET_STATISTICS_EX_RES work. If it doesn't, fall back to MSG_SMS_GET_STATISTICS_REQ. That is likely better than the current logic, that tries to guess what's available based on a firmware version. I'm out this week for a meeting in San Jose. Could you please try to write such patch and submit to the ML? I'll test it after returning back to Brazil. > I still with problems on scan but as i’m without antenna, tomorrow I will try again. Well, you generally need an external antenna to get ISDB-T broadcast signals on most places, and a good RC6 cabling with low noise TAPs, if you're using a common building antenna. A very high gain internal antenna, placed at the window sometimes work. Regards, Mauro > > Thank you for help! > > Cheers, > - Roberto > > root@awsom:~# dvbv5-scan freq.conf > INFO Scanning frequency #1 473142857 > Lock (0x1f) Signal= 0.06% C/N= 0.00% UCB= 0 postBER= 8 > error while waiting for PAT table > INFO Scanning frequency #2 479142857 > Lock (0x1f) Signal= 0.06% C/N= 0.00% UCB= 0 postBER= 8 > error while waiting for PAT table > INFO Scanning frequency #3 485142857 > Lock (0x1f) Signal= 0.06% C/N= 0.00% UCB= 0 postBER= 8 > error while waiting for PAT table > INFO Scanning frequency #4 491142857 > Lock (0x1f) Signal= 0.07% C/N= 0.00% UCB= 0 postBER= 8 > error while waiting for PAT table > > > > Em 27/04/2014, à(s) 10:00, Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> escreveu: > > > Em Sun, 27 Apr 2014 09:31:17 -0300 > > Roberto Alcantara <roberto@xxxxxxxxxxxxxx> escreveu: > > > >> Hello, > >> > >> After a lot of tries with a few commits I obtained an version from siano drivers that loads fine in my 3.4.75.sun7i kernel @A20 device. > > > > This message looks weird: > > [ 1267.803903] data rate 0 bytes/secs > > > > > > I’m using checkout from 2a7643159d commit. > >> > >> Firmware is loading without any issue reported. But when I try to scan with dvbv5-scan I see: > >> > >> root@awsom:~# dvbv5-scan freq.conf > >> INFO Scanning frequency #1 473142857 > >> ERROR FE_READ_STATUS: Timer expired > >> ERROR: dvb_fe_get_stats failed (Timer expired) > >> ERROR Error: no adapter status > >> ERROR FE_READ_STATUS: Timer expired > >> ERROR: dvb_fe_get_stats failed (Timer expired) > >> ERROR Error: no adapter status > >> ERROR FE_READ_STATUS: Timer expired > >> ERROR: dvb_fe_get_stats failed (Timer expired) > >> ERROR Error: no adapter status > >> > >> In my desktop using same firmware I can scan without this errors. I tried with device directly connected and via usb powered hub with same results. > > > > You should search for ETIME at the Siano driver. There are lots of > > cases where this is returned at: > > drivers/media/common/siano/smscoreapi.c > > > > Probably, it is due to those: > >> [ 1050.516057] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1052.516059] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1054.516049] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1056.516057] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1058.516047] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > > > > I'm not seeing any receive packet from those requested stats. > > > >> > >> Did you have any tips for debug this error? Any ideas will be appreciated :-) > > > > I suspect that this is due to driver's bad backport to Kernel 3.4. > > > > Another possibility would be some troubles with URB settings or with the USB > > driver. > > > > Regards, > > Mauro > > > >> Thank you very much! > >> > >> - Roberto > >> > >> > >> dmesg: > >> > >> [ 6.012466] init: plymouth-splash main process (271) terminated with status 2 > >> [ 6.301960] init: bluetooth main process (231) terminated with status 1 > >> [ 6.359855] init: bluetooth main process ended, respawning > >> [ 6.706961] smsusb_probe: interface number 0 > >> [ 6.709849] smsusb_probe: smsusb_probe 0 > >> [ 6.764522] smsusb_probe: endpoint 0 81 02 512 > >> [ 6.825161] smsusb_probe: endpoint 1 02 02 512 > >> [ 6.863769] smsusb_init_device: in_ep = 81, out_ep = 02 > >> [ 6.927804] smscore_register_device: allocated 50 buffers > >> [ 6.932445] smscore_register_device: device ee6a7c00 created > >> [ 7.040405] smsusb_init_device: smsusb_start_streaming(...). > >> [ 7.158579] smscore_set_device_mode: set device mode to 6 > >> [ 7.212493] smsusb_sendrequest: sending MSG_SMS_GET_VERSION_EX_REQ(668) size: 8 > >> [ 7.275489] smsusb_onresponse: received MSG_SMS_GET_VERSION_EX_RES(669) size: 100 > >> [ 7.280571] smscore_onresponse: Firmware id 255 prots 0x0 ver 8.1 > >> [ 7.289832] smscore_get_fw_filename: trying to get fw name from sms_boards board_id 18 mode 6 > >> [ 7.362775] smscore_get_fw_filename: cannot find fw name in sms_boards, getting from lookup table mode 6 type 7 > >> [ 7.425728] smscore_load_firmware_from_file: Firmware name: isdbt_rio.inp > >> [ 7.492292] smscore_load_firmware_from_file: read fw isdbt_rio.inp, buffer size=0x14f50 > >> [ 7.520049] smscore_load_firmware_family2: loading FW to addr 0x40260 size 85828 > >> [ 7.531771] smsusb_sendrequest: sending MSG_SMS_DATA_DOWNLOAD_REQ(660) size: 252 > >> [ 7.546317] smsusb_onresponse: received MSG_SMS_DATA_DOWNLOAD_RES(661) size: 12 > >> [ 7.556369] smsusb_sendrequest: sending MSG_SMS_DATA_DOWNLOAD_REQ(660) size: 252 > >> [ 7.572398] smsusb_onresponse: received MSG_SMS_DATA_DOWNLOAD_RES(661) size: 12 > >> ... > >> [ 1037.808015] smscore_set_device_mode: firmware download success > >> [ 1037.814104] smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 > >> [ 1037.820918] smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 > >> [ 1037.827058] smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 > >> [ 1037.833273] smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 > >> [ 1037.838957] smscore_set_device_mode: Success setting device mode. > >> [ 1037.844360] DVB: registering new adapter (Siano Rio Digital Receiver) > >> [ 1037.852324] DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... > >> [ 1037.856897] smscore_register_client: eccd2800 693 1 > >> [ 1037.861345] smscore_init_ir: IR port has not been detected > >> [ 1037.866723] smscore_start_device: device ee575c00 started, rc 0 > >> [ 1037.871092] smsusb_init_device: device 0xeccd2000 created > >> [ 1037.873514] smsusb_probe: rc 0 > >> [ 1048.492613] smsusb_sendrequest: sending MSG_SMS_ISDBT_TUNE_REQ(776) size: 24 > >> [ 1048.499073] smsusb_onresponse: received MSG_SMS_ISDBT_TUNE_RES(777) size: 12 > >> [ 1048.503532] smscore_onresponse: > >> [ 1048.503540] data rate 275 bytes/secs > >> [ 1048.509963] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1048.926409] smsusb_onresponse: received MSG_SMS_NO_SIGNAL_IND(828) size: 8 > >> [ 1050.516057] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1052.516059] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1054.516049] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1056.516057] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1058.516047] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1075.740431] smsusb_sendrequest: sending MSG_SMS_ISDBT_TUNE_REQ(776) size: 24 > >> [ 1075.747999] smsusb_onresponse: received MSG_SMS_ISDBT_TUNE_RES(777) size: 12 > >> [ 1075.752285] smscore_onresponse: > >> [ 1075.752293] data rate 0 bytes/secs > >> [ 1075.759951] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1075.941272] smsusb_onresponse: received MSG_SMS_NO_SIGNAL_IND(828) size: 8 > >> [ 1077.766050] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1135.457780] smsusb_sendrequest: sending MSG_SMS_ISDBT_TUNE_REQ(776) size: 24 > >> [ 1135.463989] smsusb_onresponse: received MSG_SMS_ISDBT_TUNE_RES(777) size: 12 > >> [ 1135.468278] smscore_onresponse: > >> [ 1135.468286] data rate 0 bytes/secs > >> [ 1135.474758] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1135.657430] smsusb_onresponse: received MSG_SMS_NO_SIGNAL_IND(828) size: 8 > >> [ 1137.496749] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1139.496050] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1141.496582] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1267.793252] smsusb_sendrequest: sending MSG_SMS_ISDBT_TUNE_REQ(776) size: 24 > >> [ 1267.799608] smsusb_onresponse: received MSG_SMS_ISDBT_TUNE_RES(777) size: 12 > >> [ 1267.803895] smscore_onresponse: > >> [ 1267.803903] data rate 0 bytes/secs > >> [ 1267.810356] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1267.992273] smsusb_onresponse: received MSG_SMS_NO_SIGNAL_IND(828) size: 8 > >> [ 1269.816058] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1271.816059] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1273.816488] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1275.816050] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> [ 1277.816965] smsusb_sendrequest: sending MSG_SMS_GET_STATISTICS_REQ(615) size: 8 > >> > >> > >> > >> root@awsom:~# lsmod > >> Module Size Used by > >> smsdvb 13909 0 > >> disp_ump 854 0 > >> smsusb 10021 0 > >> smsmdtv 43874 2 smsdvb,smsusb > >> mali_drm 2638 0 > >> mali 116265 0 > >> ump 56392 2 disp_ump,mali > >> lcd 3646 0 > >> root@awsom:~# > >> > >> > >> > >> > >> root@awsom:~# lsusb -v > >> > >> Bus 001 Device 005: ID 187f:0600 Siano Mobile Silicon > >> Device Descriptor: > >> bLength 18 > >> bDescriptorType 1 > >> bcdUSB 2.00 > >> bDeviceClass 0 (Defined at Interface level) > >> bDeviceSubClass 0 > >> bDeviceProtocol 0 > >> bMaxPacketSize0 64 > >> idVendor 0x187f Siano Mobile Silicon > >> idProduct 0x0600 > >> bcdDevice 0.08 > >> iManufacturer 1 MDTV Receiver > >> iProduct 2 MDTV Receiver > >> iSerial 0 > >> bNumConfigurations 1 > >> Configuration Descriptor: > >> bLength 9 > >> bDescriptorType 2 > >> wTotalLength 32 > >> bNumInterfaces 1 > >> bConfigurationValue 1 > >> iConfiguration 0 > >> bmAttributes 0x80 > >> (Bus Powered) > >> MaxPower 100mA > >> Interface Descriptor: > >> bLength 9 > >> bDescriptorType 4 > >> bInterfaceNumber 0 > >> bAlternateSetting 0 > >> bNumEndpoints 2 > >> bInterfaceClass 255 Vendor Specific Class > >> bInterfaceSubClass 255 Vendor Specific Subclass > >> bInterfaceProtocol 255 Vendor Specific Protocol > >> iInterface 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x81 EP 1 IN > >> bmAttributes 2 > >> Transfer Type Bulk > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0200 1x 512 bytes > >> bInterval 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x02 EP 2 OUT > >> bmAttributes 2 > >> Transfer Type Bulk > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0200 1x 512 bytes > >> bInterval 0 > >> Device Qualifier (for other device speed): > >> bLength 10 > >> bDescriptorType 6 > >> bcdUSB 2.00 > >> bDeviceClass 255 Vendor Specific Class > >> bDeviceSubClass 255 Vendor Specific Subclass > >> bDeviceProtocol 255 Vendor Specific Protocol > >> bMaxPacketSize0 64 > >> bNumConfigurations 1 > >> Device Status: 0x0000 > >> (Bus Powered) > >> > >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > >> Device Descriptor: > >> bLength 18 > >> bDescriptorType 1 > >> bcdUSB 2.00 > >> bDeviceClass 9 Hub > >> bDeviceSubClass 0 Unused > >> bDeviceProtocol 0 Full speed (or root) hub > >> bMaxPacketSize0 64 > >> idVendor 0x1d6b Linux Foundation > >> idProduct 0x0002 2.0 root hub > >> bcdDevice 3.04 > >> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd > >> iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver > >> iSerial 1 sw-ehci > >> bNumConfigurations 1 > >> Configuration Descriptor: > >> bLength 9 > >> bDescriptorType 2 > >> wTotalLength 25 > >> bNumInterfaces 1 > >> bConfigurationValue 1 > >> iConfiguration 0 > >> bmAttributes 0xe0 > >> Self Powered > >> Remote Wakeup > >> MaxPower 0mA > >> Interface Descriptor: > >> bLength 9 > >> bDescriptorType 4 > >> bInterfaceNumber 0 > >> bAlternateSetting 0 > >> bNumEndpoints 1 > >> bInterfaceClass 9 Hub > >> bInterfaceSubClass 0 Unused > >> bInterfaceProtocol 0 Full speed (or root) hub > >> iInterface 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x81 EP 1 IN > >> bmAttributes 3 > >> Transfer Type Interrupt > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0004 1x 4 bytes > >> bInterval 12 > >> Hub Descriptor: > >> bLength 9 > >> bDescriptorType 41 > >> nNbrPorts 1 > >> wHubCharacteristic 0x000a > >> No power switching (usb 1.0) > >> Per-port overcurrent protection > >> bPwrOn2PwrGood 10 * 2 milli seconds > >> bHubContrCurrent 0 milli Ampere > >> DeviceRemovable 0x00 > >> PortPwrCtrlMask 0xff > >> Hub Port Status: > >> Port 1: 0000.0503 highspeed power enable connect > >> Device Status: 0x0001 > >> Self Powered > >> > >> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > >> Device Descriptor: > >> bLength 18 > >> bDescriptorType 1 > >> bcdUSB 1.10 > >> bDeviceClass 9 Hub > >> bDeviceSubClass 0 Unused > >> bDeviceProtocol 0 Full speed (or root) hub > >> bMaxPacketSize0 64 > >> idVendor 0x1d6b Linux Foundation > >> idProduct 0x0001 1.1 root hub > >> bcdDevice 3.04 > >> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd > >> iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver > >> iSerial 1 sw-ohci > >> bNumConfigurations 1 > >> Configuration Descriptor: > >> bLength 9 > >> bDescriptorType 2 > >> wTotalLength 25 > >> bNumInterfaces 1 > >> bConfigurationValue 1 > >> iConfiguration 0 > >> bmAttributes 0xe0 > >> Self Powered > >> Remote Wakeup > >> MaxPower 0mA > >> Interface Descriptor: > >> bLength 9 > >> bDescriptorType 4 > >> bInterfaceNumber 0 > >> bAlternateSetting 0 > >> bNumEndpoints 1 > >> bInterfaceClass 9 Hub > >> bInterfaceSubClass 0 Unused > >> bInterfaceProtocol 0 Full speed (or root) hub > >> iInterface 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x81 EP 1 IN > >> bmAttributes 3 > >> Transfer Type Interrupt > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0002 1x 2 bytes > >> bInterval 255 > >> Hub Descriptor: > >> bLength 9 > >> bDescriptorType 41 > >> nNbrPorts 1 > >> wHubCharacteristic 0x0012 > >> No power switching (usb 1.0) > >> No overcurrent protection > >> bPwrOn2PwrGood 2 * 2 milli seconds > >> bHubContrCurrent 0 milli Ampere > >> DeviceRemovable 0x00 > >> PortPwrCtrlMask 0xff > >> Hub Port Status: > >> Port 1: 0000.0100 power > >> Device Status: 0x0001 > >> Self Powered > >> > >> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > >> Device Descriptor: > >> bLength 18 > >> bDescriptorType 1 > >> bcdUSB 2.00 > >> bDeviceClass 9 Hub > >> bDeviceSubClass 0 Unused > >> bDeviceProtocol 0 Full speed (or root) hub > >> bMaxPacketSize0 64 > >> idVendor 0x1d6b Linux Foundation > >> idProduct 0x0002 2.0 root hub > >> bcdDevice 3.04 > >> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd > >> iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver > >> iSerial 1 sw-ehci > >> bNumConfigurations 1 > >> Configuration Descriptor: > >> bLength 9 > >> bDescriptorType 2 > >> wTotalLength 25 > >> bNumInterfaces 1 > >> bConfigurationValue 1 > >> iConfiguration 0 > >> bmAttributes 0xe0 > >> Self Powered > >> Remote Wakeup > >> MaxPower 0mA > >> Interface Descriptor: > >> bLength 9 > >> bDescriptorType 4 > >> bInterfaceNumber 0 > >> bAlternateSetting 0 > >> bNumEndpoints 1 > >> bInterfaceClass 9 Hub > >> bInterfaceSubClass 0 Unused > >> bInterfaceProtocol 0 Full speed (or root) hub > >> iInterface 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x81 EP 1 IN > >> bmAttributes 3 > >> Transfer Type Interrupt > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0004 1x 4 bytes > >> bInterval 12 > >> Hub Descriptor: > >> bLength 9 > >> bDescriptorType 41 > >> nNbrPorts 1 > >> wHubCharacteristic 0x000a > >> No power switching (usb 1.0) > >> Per-port overcurrent protection > >> bPwrOn2PwrGood 10 * 2 milli seconds > >> bHubContrCurrent 0 milli Ampere > >> DeviceRemovable 0x00 > >> PortPwrCtrlMask 0xff > >> Hub Port Status: > >> Port 1: 0000.0100 power > >> Device Status: 0x0001 > >> Self Powered > >> > >> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > >> Device Descriptor: > >> bLength 18 > >> bDescriptorType 1 > >> bcdUSB 1.10 > >> bDeviceClass 9 Hub > >> bDeviceSubClass 0 Unused > >> bDeviceProtocol 0 Full speed (or root) hub > >> bMaxPacketSize0 64 > >> idVendor 0x1d6b Linux Foundation > >> idProduct 0x0001 1.1 root hub > >> bcdDevice 3.04 > >> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd > >> iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver > >> iSerial 1 sw-ohci > >> bNumConfigurations 1 > >> Configuration Descriptor: > >> bLength 9 > >> bDescriptorType 2 > >> wTotalLength 25 > >> bNumInterfaces 1 > >> bConfigurationValue 1 > >> iConfiguration 0 > >> bmAttributes 0xe0 > >> Self Powered > >> Remote Wakeup > >> MaxPower 0mA > >> Interface Descriptor: > >> bLength 9 > >> bDescriptorType 4 > >> bInterfaceNumber 0 > >> bAlternateSetting 0 > >> bNumEndpoints 1 > >> bInterfaceClass 9 Hub > >> bInterfaceSubClass 0 Unused > >> bInterfaceProtocol 0 Full speed (or root) hub > >> iInterface 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x81 EP 1 IN > >> bmAttributes 3 > >> Transfer Type Interrupt > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0002 1x 2 bytes > >> bInterval 255 > >> Hub Descriptor: > >> bLength 9 > >> bDescriptorType 41 > >> nNbrPorts 1 > >> wHubCharacteristic 0x0012 > >> No power switching (usb 1.0) > >> No overcurrent protection > >> bPwrOn2PwrGood 2 * 2 milli seconds > >> bHubContrCurrent 0 milli Ampere > >> DeviceRemovable 0x00 > >> PortPwrCtrlMask 0xff > >> Hub Port Status: > >> Port 1: 0000.0100 power > >> Device Status: 0x0001 > >> Self Powered > >> root@awsom:~# > >> > >> > > > > > > -- > > > > Cheers, > > Mauro > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
