This is operate great if before connect devices I execute: sudo rmmod em28xx_rc sudo rmmod em28xx sudo modprobe em28xx card=2,2,2,2 24.03.2014, 13:54, "Evgeny Sagatov" <sagatov@xxxxx>: > Hi! > > I have the EasyCap device with EM2860 + SAA7113 + STAC9752 chips. > Video from composite and from S-Video operate great. > But I not have the sound. I do not see any errors in my logs. > I tried VLC and gstreamer for open alsa device with any rates and options. > > I work on Ubuntu 12.04 and tried 3.2, 3.11 and 3.13 kernels. > > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1125.942116] usb 3-2: new high-speed USB device number 4 using xhci_hcd > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1125.958937] em28xx: New device @ 480 Mbps (eb1a:2861, interface 0, class 0) > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1125.958984] em28xx #0: chip ID is em2860 > Mar 24 13:47:38 ip4tv-st2 mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2" > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.050300] em28xx #0: board has no eeprom > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.117043] em28xx #0: found i2c device @ 0x4a [saa7113h] > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.132110] em28xx #0: Your board has no unique USB ID. > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.132117] em28xx #0: A hint were successfully done, based on i2c devicelist hash. > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.132120] em28xx #0: This method is not 100% failproof. > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.132123] em28xx #0: If the board were missdetected, please email this log to: > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.132126] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> > Mar 24 13:47:38 ip4tv-st2 kernel: [ 1126.132129] em28xx #0: Board detected as EM2860/SAA711X Reference Design > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.209810] em28xx #0: Identified as EM2860/SAA711X Reference Design (card=19) > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.209816] em28xx #0: Registering snapshot button... > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.209934] input: em28xx snapshot button as /devices/pci0000:00/0000:00:14.0/usb3/3-2/input/input13 > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.569889] em28xx #0: Config register raw data: 0x10 > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.593471] em28xx #0: AC97 vendor ID = 0x83847652 > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.605474] em28xx #0: AC97 features = 0x6a90 > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1126.605480] em28xx #0: Sigmatel audio processor detected(stac 9752) > Mar 24 13:47:39 ip4tv-st2 kernel: [ 1127.016889] em28xx #0: v4l2 driver version 0.1.3 > Mar 24 13:47:40 ip4tv-st2 mtp-probe: bus: 3, device: 4 was not an MTP device > Mar 24 13:47:40 ip4tv-st2 kernel: [ 1127.944248] em28xx #0: V4L2 video device registered as video1 > Mar 24 13:47:40 ip4tv-st2 kernel: [ 1127.944256] em28xx #0: V4L2 VBI device registered as vbi0 > Mar 24 13:47:40 ip4tv-st2 kernel: [ 1127.944377] em28xx audio device (eb1a:2861): interface 1, class 1 > > 0 [PCH ]: HDA-Intel - HDA Intel PCH > HDA Intel PCH at 0xf7e10000 irq 45 > 1 [U0xeb1a0x2861 ]: USB-Audio - USB Device 0xeb1a:0x2861 > USB Device 0xeb1a:0x2861 at usb-0000:00:14.0-2, high speed > > 1: : sequencer > 2: [ 1- 0]: digital audio capture > 3: [ 1] : control > 4: [ 0- 3]: digital audio playback > 5: [ 0- 0]: digital audio playback > 6: [ 0- 0]: digital audio capture > 7: [ 0- 3]: hardware dependent > 8: [ 0- 0]: hardware dependent > 9: [ 0] : control > 33: : timer > > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M > |__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M > |__ Port 2: Dev 4, If 0, Class=vend., Driver=em28xx, 480M > |__ Port 2: Dev 4, If 1, Class=audio, Driver=snd-usb-audio, 480M > |__ Port 2: Dev 4, If 2, Class=audio, Driver=snd-usb-audio, 480M > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M > |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/6p, 480M > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M > |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/6p, 480M > |__ Port 1: Dev 3, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M > |__ Port 1: Dev 3, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M > |__ Port 3: Dev 4, If 0, Class='bInterfaceClass 0x0e not yet handled', Driver=uvcvideo, 480M > |__ Port 3: Dev 4, If 1, Class='bInterfaceClass 0x0e not yet handled', Driver=uvcvideo, 480M > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 003 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120 > Bus 003 Device 004: ID eb1a:2861 eMPIA Technology, Inc. > Bus 001 Device 003: ID 8087:07da Intel Corp. > Bus 001 Device 004: ID 04f2:b33e Chicony Electronics Co., Ltd > > -- > Sincerely, Evgeny Sagatov > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
