On Thu, Feb 27, 2014 at 4:52 PM, James Hogan <james.hogan@xxxxxxxxxx> wrote:
> Hi Rob, Mark + DT maintainers,
>
> On Friday 07 February 2014 15:49:15 James Hogan wrote:
>> Add device tree binding for ImgTec Consumer Infrared block, specifically
>> major revision 1 of the hardware.
>>
>> Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx>
>> Cc: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
>> Cc: linux-media@xxxxxxxxxxxxxxx
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>> Cc: devicetree@xxxxxxxxxxxxxxx
>> Cc: Rob Landley <rob@xxxxxxxxxxx>
>> Cc: linux-doc@xxxxxxxxxxxxxxx
>> Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
>> ---
>> v3:
>> - Rename compatible string to "img,ir-rev1" (Rob Herring).
>> - Specify ordering of clocks explicitly (Rob Herring).
>
> I'd appreciate if somebody could give this another glance after the two
> changes listed above and Ack it (I'll probably be posting a v4 patchset
> tomorrow).
Looks fine.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
>>
>> v2:
>> - Future proof compatible string from "img,ir" to "img,ir1", where the 1
>> corresponds to the major revision number of the hardware (Tomasz
>> Figa).
>> - Added clock-names property and three specific clock names described in
>> the manual, only one of which is used by the current driver (Tomasz
>> Figa).
>> ---
>> .../devicetree/bindings/media/img-ir-rev1.txt | 34
>> ++++++++++++++++++++++ 1 file changed, 34 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/img-ir-rev1.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt
>> b/Documentation/devicetree/bindings/media/img-ir-rev1.txt new file mode
>> 100644
>> index 000000000000..5434ce61b925
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt
>> @@ -0,0 +1,34 @@
>> +* ImgTec Infrared (IR) decoder version 1
>> +
>> +This binding is for Imagination Technologies' Infrared decoder block,
>> +specifically major revision 1.
>> +
>> +Required properties:
>> +- compatible: Should be "img,ir-rev1"
>> +- reg: Physical base address of the controller and length of
>> + memory mapped region.
>> +- interrupts: The interrupt specifier to the cpu.
>> +
>> +Optional properties:
>> +- clocks: List of clock specifiers as described in standard
>> + clock bindings.
>> + Up to 3 clocks may be specified in the following order:
>> + 1st: Core clock (defaults to 32.768KHz if omitted).
>> + 2nd: System side (fast) clock.
>> + 3rd: Power modulation clock.
>> +- clock-names: List of clock names corresponding to the clocks
>> + specified in the clocks property.
>> + Accepted clock names are:
>> + "core": Core clock.
>> + "sys": System clock.
>> + "mod": Power modulation clock.
>> +
>> +Example:
>> +
>> + ir@02006200 {
>> + compatible = "img,ir-rev1";
>> + reg = <0x02006200 0x100>;
>> + interrupts = <29 4>;
>> + clocks = <&clk_32khz>;
>> + clock-names = "core";
>> + };
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
