The device tree graph bindings as used by V4L2 and documented in
Documentation/device-tree/bindings/media/video-interfaces.txt contain
generic parts that are not media specific but could be useful for any
subsystem with data flow between multiple devices. This document
describe the generic bindings.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/graph.txt | 98 +++++++++++++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/graph.txt
diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt
new file mode 100644
index 0000000..97c877e
--- /dev/null
+++ b/Documentation/devicetree/bindings/graph.txt
@@ -0,0 +1,98 @@
+Common bindings for device graphs
+
+General concept
+---------------
+
+The hierarchical organisation of the device tree is well suited to describe
+control flow to devices, but data flow between devices that work together to
+form a logical compound device can follow arbitrarily complex graphs.
+The device tree graph bindings allow to describe data bus connections between
+individual devices, that can not be inferred from device tree parent-child
+relationships. The common bindings do not contain any information about the
+direction or type of data flow, they just map connections. Specific properties
+of the connections are described by specialized bindings depending on the type
+of connection. To see how this binding applies to video pipelines, see for
+example Documentation/device-tree/bindings/media/video-interfaces.txt.
+
+Devices can have multiple data interfaces, each of which can be connected to
+the data interfaces of one or more remote devices via a data bus.
+Data interfaces are described by the device nodes' child 'port' nodes. A port
+node contains an 'endpoint' subnode for each remote device port connected to
+this port via a bus. If a port is connected to more than one remote device on
+the same bus, an 'endpoint' child node must be provided for each of them. If
+more than one port is present in a device node or there is more than one
+endpoint at a port, or port node needs to be associated with a selected
+hardware interface, a common scheme using '#address-cells', '#size-cells'
+and 'reg' properties is used.
+
+device {
+ ...
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ ...
+ endpoint@0 { ... };
+ endpoint@1 { ... };
+ };
+
+ port@1 { ... };
+};
+
+All 'port' nodes can be grouped under optional 'ports' node, which allows to
+specify #address-cells, #size-cells properties independently for the 'port'
+and 'endpoint' nodes and any child device nodes a device might have.
+
+device {
+ ...
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ ...
+ endpoint@0 { ... };
+ endpoint@1 { ... };
+ };
+
+ port@1 { ... };
+ };
+};
+
+Each endpoint can contain a 'remote-endpoint' phandle property that points to
+the corresponding endpoint in the port of the remote device. Two 'endpoint'
+nodes are linked with each other through their 'remote-endpoint' phandles.
+
+device_1 {
+ port {
+ device_1_output: endpoint {
+ remote-endpoint = <&device_2_input>;
+ };
+ };
+};
+
+device_1 {
+ port {
+ device_2_input: endpoint {
+ remote-endpoint = <&device_1_output>;
+ };
+ };
+};
+
+
+Required properties
+-------------------
+
+If there is more than one 'port' or more than one 'endpoint' node or 'reg'
+property is present in port and/or endpoint nodes the following properties
+are required in a relevant parent node:
+
+ - #address-cells : number of cells required to define port/endpoint
+ identifier, should be 1.
+ - #size-cells : should be zero.
+
+Optional endpoint properties
+----------------------------
+
+- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
+
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
