Hi Hans,
Hans Verkuil wrote:
On 02/20/2014 08:41 PM, Sakari Ailus wrote:
Some devices do not produce timestamps that correspond to the end of the
frame. The user space should be informed on the matter. This patch achieves
that by adding buffer flags (and a mask) for timestamp sources since more
possible timestamping points are expected than just two.
A three-bit mask is defined (V4L2_BUF_FLAG_TSTAMP_SRC_MASK) and two of the
eight possible values is are defined V4L2_BUF_FLAG_TSTAMP_SRC_EOF for end of
frame (value zero) V4L2_BUF_FLAG_TSTAMP_SRC_SOE for start of exposure (next
value).
Sorry, but I still have two small notes:
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
---
since v5:
- Add a note on software generated timestamp inaccuracy.
Documentation/DocBook/media/v4l/io.xml | 38 +++++++++++++++++++++++++-----
drivers/media/v4l2-core/videobuf2-core.c | 4 +++-
include/media/videobuf2-core.h | 2 ++
include/uapi/linux/videodev2.h | 4 ++++
4 files changed, 41 insertions(+), 7 deletions(-)
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index 46d24b3..22b87bc 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -653,12 +653,6 @@ plane, are stored in struct <structname>v4l2_plane</structname> instead.
In that case, struct <structname>v4l2_buffer</structname> contains an array of
plane structures.</para>
- <para>For timestamp types that are sampled from the system clock
-(V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC) it is guaranteed that the timestamp is
-taken after the complete frame has been received (or transmitted in
-case of video output devices). For other kinds of
-timestamps this may vary depending on the driver.</para>
-
<table frame="none" pgwide="1" id="v4l2-buffer">
<title>struct <structname>v4l2_buffer</structname></title>
<tgroup cols="4">
@@ -1119,6 +1113,38 @@ in which case caches have not been used.</entry>
<entry>The CAPTURE buffer timestamp has been taken from the
corresponding OUTPUT buffer. This flag applies only to mem2mem devices.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_TSTAMP_SRC_MASK</constant></entry>
+ <entry>0x00070000</entry>
+ <entry>Mask for timestamp sources below. The timestamp source
+ defines the point of time the timestamp is taken in relation to
+ the frame. Logical and operation between the
+ <structfield>flags</structfield> field and
+ <constant>V4L2_BUF_FLAG_TSTAMP_SRC_MASK</constant> produces the
+ value of the timestamp source.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_TSTAMP_SRC_EOF</constant></entry>
+ <entry>0x00000000</entry>
+ <entry>End Of Frame. The buffer timestamp has been taken
+ when the last pixel of the frame has been received or the
+ last pixel of the frame has been transmitted. In practice,
+ software generated timestamps will typically be read from
+ the clock a small amount of time after the last pixel has
+ been received, depending on the system and other activity
s/been received/been received or transmitted/
I'll fix that.
+ in it.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_TSTAMP_SRC_SOE</constant></entry>
+ <entry>0x00010000</entry>
+ <entry>Start Of Exposure. The buffer timestamp has been
+ taken when the exposure of the frame has begun. In
+ practice, software generated timestamps will typically be
+ read from the clock a small amount of time after the last
+ pixel has been received, depending on the system and other
+ activity in it. This is only valid for buffer type
+ <constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant>.</entry>
I would move the last sentence up to just before "In practice...". The
way it is now it looks like an afterthought.
Same here.
I am also not sure whether the whole "In practice" sentence is valid
here. Certainly the bit about "the last pixel" isn't since this is the
"SOE" case and not the End Of Frame. In the case of the UVC driver (and that's
the only one using this timestamp source) the timestamps come from the
hardware as I understand it, so the "software generated" bit doesn't
apply.
Indeed. I don't know how the timestamp is even produced by the hardware.
It's possible to calculate it (decrementing the readout time + exposure
time from the end of frame timestamp) and that's what the devices
supposedly do. The pre-frame exposure time isn't available to the host,
so the end of frame timestamp cannot be calculated by the host from the
camera generated timestamp.
However the link to the host is USB which has a lot more latency than
almost anything else which makes even hardware generated timestamps a
little imprecise.
--
Regards,
Sakari Ailus
sakari.ailus@xxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
