Hi Daniel,
Thanks for the update.
Daniel Jeong wrote:
> Add addtional falult bits for FLASH
> V4L2_FLASH_FAULT_UNDER_VOLTAGE : UVLO
> V4L2_FLASH_FAULT_INPUT_VOLTAGE : input voltage is adjusted by IVFM
> V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE : NTC Trip point is crossed.
>
> Signed-off-by: Daniel Jeong <gshark.jeong@xxxxxxxxx>
> ---
> Documentation/DocBook/media/v4l/controls.xml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
> index a5a3188..8121f7e 100644
> --- a/Documentation/DocBook/media/v4l/controls.xml
> +++ b/Documentation/DocBook/media/v4l/controls.xml
> @@ -4370,6 +4370,22 @@ interface and may change in the future.</para>
> <entry>The flash controller has detected a short or open
> circuit condition on the indicator LED.</entry>
> </row>
> + <row>
> + <entry><constant>V4L2_FLASH_FAULT_UNDER_VOLTAGE</constant></entry>
> + <entry>Flash controller voltage to the flash LED
> + has been below the minimum limit specific to the flash
> + controller.</entry>
> + </row>
> + <row>
> + <entry><constant>V4L2_FLASH_FAULT_INPUT_VOLTAGE</constant></entry>
> + <entry>The flash controller has detected adjustment of input
> + voltage by Input Volage Flash Monitor(IVFM).</entry>
Volage -> Voltage; space before "(".
I still feel uncomfortable with the reference to the IVFM. That appears
clearely an implementation specific term.
You previously mentioned the flash current may be adjusted by the flash
controller. It should be mentioned here.
Is it possible to read the adjusted value from the chip?
> + </row>
> + <row>
> + <entry><constant>V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE</constant></entry>
> + <entry>The flash controller has detected that TEMP input has
> + crossed NTC Trip Voltage.</entry>
Even if the NTC resistor might be the actual implementation, I wouldn't
refer to it here. There could be a real temperature sensor, for instance.
> + </row>
> </tbody>
> </entrytbl>
> </row>
>
--
Kind regards,
Sakari Ailus
sakari.ailus@xxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
