Moi Malcolm!
On 09.02.2014 10:59, Malcolm Priestley wrote:
On Sat, 2014-02-08 at 16:11 +0000, Malcolm Priestley wrote:
The generic v1 and v2 devices have been all tested.
IDs tested
USB_PID_ITETECH_IT9135 v1 & v2
USB_PID_ITETECH_IT9135_9005 v1
USB_PID_ITETECH_IT9135_9006 v2
Current Issues
There is no signal on
USB_PID_ITETECH_IT9135 v2
No SNR reported all devices.
All single devices tune and scan fine.
All remotes tested okay.
Dual device failed to register second adapter
USB_PID_KWORLD_UB499_2T_T09
It is not clear what the problem is at the moment.
Hi Antti
I have found the problem here.
state->eeprom_addr + EEPROM_2ND_DEMOD_ADDR
contains no value
So on 9135 devices register 0x4bfb and the I2C address
(state->af9033_config[1].i2c_addr) need to be set to 0x3a.
I have only manually changed these and both adapters work fine.
Also, I can't find pick up for register 0xcfff although it appears
to be on by default.
I will try and do a patch later and the patch for remaining ids in
it913x.
Good!
That non-working dual device must be IT9135 v2 as I have one dual
TerraTec, which is working and is build upon version 1 of IT9135. I have
no v2 dual device.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
