On Sun, Feb 09, 2014 at 10:22:19AM +0100, Jean-Francois Moine wrote: > On Fri, 7 Feb 2014 20:23:51 +0000 > Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> wrote: > > > Here's my changes to the TDA998x driver to add support for the component > > helper. The TDA998x driver retains support for the old way so that > > drivers can be transitioned. For any one DRM "card" the transition to > > I rewrote the tda998x as a simple encoder+connector (i.e. not a > slave_encoder) with your component helper, and the code is much clearer > and simpler: the DRM driver has nothing to do except to know that the > tda998x is a component and to set the possible_crtcs. That's exactly what I've done - the slave encoder veneer can be simply deleted when tilcdc is converted. > AFAIK, only the tilcdc drm driver is using the tda998x as a > slave_encoder. It does a (encoder+connector) conversion to > (slave_encoder). Then, in your changes in the TDA998x, you do a > (slave_encoder) translation to (encoder+connector). > This seems rather complicated! No. I first split out the slave encoder functions to be a veneer onto the tda998x backend, and then add the encoder & connector component support. Later, the slave encoder veneer can be deleted. The reason for this is that virtually all the tda998x backend is what's required by the encoder & connector support - which is completely logical when you realise that the generic slave encoder support is just a veneer itself adapting the encoder & connector support to a slave encoder. So, we're basically getting rid of two veneers, but we end up with exactly the same functionality. > > And yes, I'm thinking that maybe moving compare_of() into the component > > support so that drivers can share this generic function may be a good > > idea. > > This function exists already in drivers/of/platform.c as > of_dev_node_match(). It just needs to be exported. Good, thanks for pointing that out. -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was "up to 13.2Mbit". -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
