This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/media_tree.git tree: Subject: [media] media: rc: add sysfs scancode filtering interface Author: James Hogan <james.hogan@xxxxxxxxxx> Date: Fri Jan 17 10:58:49 2014 -0300 Add and document a generic sysfs based scancode filtering interface for making use of IR data matching hardware to filter out uninteresting scancodes. Two filters exist, one for normal operation and one for filtering scancodes which are permitted to wake the system from suspend. The following files are added to /sys/class/rc/rc?/: - filter: normal scancode filter value - filter_mask: normal scancode filter mask - wakeup_filter: wakeup scancode filter value - wakeup_filter_mask: wakeup scancode filter mask A new s_filter() driver callback is added which must arrange for the specified filter to be applied at the right time. Drivers can convert the scancode filter into a raw IR data filter, which can be applied immediately or later (for wake up filters). Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx> Cc: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Cc: linux-media@xxxxxxxxxxxxxxx Cc: Rob Landley <rob@xxxxxxxxxxx> Cc: linux-doc@xxxxxxxxxxxxxxx Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Documentation/ABI/testing/sysfs-class-rc | 58 +++++++++++++ drivers/media/rc/rc-main.c | 136 ++++++++++++++++++++++++++++++ include/media/rc-core.h | 29 +++++++ 3 files changed, 223 insertions(+), 0 deletions(-) --- http://git.linuxtv.org/media_tree.git?a=commitdiff;h=00942d1a1bd93ac108c1b92d504c568a37be1833 diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc index 52bc057..c0e1d14 100644 --- a/Documentation/ABI/testing/sysfs-class-rc +++ b/Documentation/ABI/testing/sysfs-class-rc @@ -32,3 +32,61 @@ Description: Writing "none" will disable all protocols. Write fails with EINVAL if an invalid protocol combination or unknown protocol name is used. + +What: /sys/class/rc/rcN/filter +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> +Description: + Sets the scancode filter expected value. + Use in combination with /sys/class/rc/rcN/filter_mask to set the + expected value of the bits set in the filter mask. + If the hardware supports it then scancodes which do not match + the filter will be ignored. Otherwise the write will fail with + an error. + This value may be reset to 0 if the current protocol is altered. + +What: /sys/class/rc/rcN/filter_mask +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> +Description: + Sets the scancode filter mask of bits to compare. + Use in combination with /sys/class/rc/rcN/filter to set the bits + of the scancode which should be compared against the expected + value. A value of 0 disables the filter to allow all valid + scancodes to be processed. + If the hardware supports it then scancodes which do not match + the filter will be ignored. Otherwise the write will fail with + an error. + This value may be reset to 0 if the current protocol is altered. + +What: /sys/class/rc/rcN/wakeup_filter +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> +Description: + Sets the scancode wakeup filter expected value. + Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to + set the expected value of the bits set in the wakeup filter mask + to trigger a system wake event. + If the hardware supports it and wakeup_filter_mask is not 0 then + scancodes which match the filter will wake the system from e.g. + suspend to RAM or power off. + Otherwise the write will fail with an error. + This value may be reset to 0 if the current protocol is altered. + +What: /sys/class/rc/rcN/wakeup_filter_mask +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> +Description: + Sets the scancode wakeup filter mask of bits to compare. + Use in combination with /sys/class/rc/rcN/wakeup_filter to set + the bits of the scancode which should be compared against the + expected value to trigger a system wake event. + If the hardware supports it and wakeup_filter_mask is not 0 then + scancodes which match the filter will wake the system from e.g. + suspend to RAM or power off. + Otherwise the write will fail with an error. + This value may be reset to 0 if the current protocol is altered. diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index f1b67db..fa8b957 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -969,6 +969,130 @@ out: return ret; } +/** + * struct rc_filter_attribute - Device attribute relating to a filter type. + * @attr: Device attribute. + * @type: Filter type. + * @mask: false for filter value, true for filter mask. + */ +struct rc_filter_attribute { + struct device_attribute attr; + enum rc_filter_type type; + bool mask; +}; +#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr) + +#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask) \ + struct rc_filter_attribute dev_attr_##_name = { \ + .attr = __ATTR(_name, _mode, _show, _store), \ + .type = (_type), \ + .mask = (_mask), \ + } + +/** + * show_filter() - shows the current scancode filter value or mask + * @device: the device descriptor + * @attr: the device attribute struct + * @buf: a pointer to the output buffer + * + * This routine is a callback routine to read a scancode filter value or mask. + * It is trigged by reading /sys/class/rc/rc?/[wakeup_]filter[_mask]. + * It prints the current scancode filter value or mask of the appropriate filter + * type in hexadecimal into @buf and returns the size of the buffer. + * + * Bits of the filter value corresponding to set bits in the filter mask are + * compared against input scancodes and non-matching scancodes are discarded. + * + * dev->lock is taken to guard against races between device registration, + * store_filter and show_filter. + */ +static ssize_t show_filter(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(attr); + u32 val; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + mutex_lock(&dev->lock); + if (!dev->s_filter) + val = 0; + else if (fattr->mask) + val = dev->scancode_filters[fattr->type].mask; + else + val = dev->scancode_filters[fattr->type].data; + mutex_unlock(&dev->lock); + + return sprintf(buf, "%#x\n", val); +} + +/** + * store_filter() - changes the scancode filter value + * @device: the device descriptor + * @attr: the device attribute struct + * @buf: a pointer to the input buffer + * @len: length of the input buffer + * + * This routine is for changing a scancode filter value or mask. + * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]filter[_mask]. + * Returns -EINVAL if an invalid filter value for the current protocol was + * specified or if scancode filtering is not supported by the driver, otherwise + * returns @len. + * + * Bits of the filter value corresponding to set bits in the filter mask are + * compared against input scancodes and non-matching scancodes are discarded. + * + * dev->lock is taken to guard against races between device registration, + * store_filter and show_filter. + */ +static ssize_t store_filter(struct device *device, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(attr); + struct rc_scancode_filter local_filter, *filter; + int ret; + unsigned long val; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + ret = kstrtoul(buf, 0, &val); + if (ret < 0) + return ret; + + /* Scancode filter not supported (but still accept 0) */ + if (!dev->s_filter) + return val ? -EINVAL : count; + + mutex_lock(&dev->lock); + + /* Tell the driver about the new filter */ + filter = &dev->scancode_filters[fattr->type]; + local_filter = *filter; + if (fattr->mask) + local_filter.mask = val; + else + local_filter.data = val; + ret = dev->s_filter(dev, fattr->type, &local_filter); + if (ret < 0) + goto unlock; + + /* Success, commit the new filter */ + *filter = local_filter; + +unlock: + mutex_unlock(&dev->lock); + return count; +} + static void rc_dev_release(struct device *device) { } @@ -1000,9 +1124,21 @@ static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env) */ static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR, show_protocols, store_protocols); +static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_NORMAL, false); +static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_NORMAL, true); +static RC_FILTER_ATTR(wakeup_filter, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_WAKEUP, false); +static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_WAKEUP, true); static struct attribute *rc_dev_attrs[] = { &dev_attr_protocols.attr, + &dev_attr_filter.attr.attr, + &dev_attr_filter_mask.attr.attr, + &dev_attr_wakeup_filter.attr.attr, + &dev_attr_wakeup_filter_mask.attr.attr, NULL, }; diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 2f6f1f7..4a72176 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -35,6 +35,29 @@ enum rc_driver_type { }; /** + * struct rc_scancode_filter - Filter scan codes. + * @data: Scancode data to match. + * @mask: Mask of bits of scancode to compare. + */ +struct rc_scancode_filter { + u32 data; + u32 mask; +}; + +/** + * enum rc_filter_type - Filter type constants. + * @RC_FILTER_NORMAL: Filter for normal operation. + * @RC_FILTER_WAKEUP: Filter for waking from suspend. + * @RC_FILTER_MAX: Number of filter types. + */ +enum rc_filter_type { + RC_FILTER_NORMAL = 0, + RC_FILTER_WAKEUP, + + RC_FILTER_MAX +}; + +/** * struct rc_dev - represents a remote control device * @dev: driver model's view of this device * @input_name: name of the input child device @@ -70,6 +93,7 @@ enum rc_driver_type { * @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler + * @scancode_filters: scancode filters (indexed by enum rc_filter_type) * @change_protocol: allow changing the protocol used on hardware decoders * @open: callback to allow drivers to enable polling/irq when IR input device * is opened. @@ -84,6 +108,7 @@ enum rc_driver_type { * device doesn't interrupt host until it sees IR pulses * @s_learning_mode: enable wide band receiver used for learning * @s_carrier_report: enable carrier reports + * @s_filter: set the scancode filter of a given type */ struct rc_dev { struct device dev; @@ -116,6 +141,7 @@ struct rc_dev { u32 max_timeout; u32 rx_resolution; u32 tx_resolution; + struct rc_scancode_filter scancode_filters[RC_FILTER_MAX]; int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); int (*open)(struct rc_dev *dev); void (*close)(struct rc_dev *dev); @@ -127,6 +153,9 @@ struct rc_dev { void (*s_idle)(struct rc_dev *dev, bool enable); int (*s_learning_mode)(struct rc_dev *dev, int enable); int (*s_carrier_report) (struct rc_dev *dev, int enable); + int (*s_filter)(struct rc_dev *dev, + enum rc_filter_type type, + struct rc_scancode_filter *filter); }; #define to_rc_dev(d) container_of(d, struct rc_dev, dev) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
