[PATCH 2/3] em28xx-camera: fix return value checks on sensor probing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit e63b009d6e the returned error code in case of not connected/responding
i2c clients is ENXIO isntead of ENODEV, which causes several error messages on
sensor probing.
Fix the i2c return value checks on sensor probing to silence these warnings.

Signed-off-by: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
---
 drivers/media/usb/em28xx/em28xx-camera.c |    4 ++--
 1 Datei geändert, 2 Zeilen hinzugefügt(+), 2 Zeilen entfernt(-)

diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
index c29f5c4..505e050 100644
--- a/drivers/media/usb/em28xx/em28xx-camera.c
+++ b/drivers/media/usb/em28xx/em28xx-camera.c
@@ -120,7 +120,7 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
 		reg = 0x00;
 		ret = i2c_master_send(&client, &reg, 1);
 		if (ret < 0) {
-			if (ret != -ENODEV)
+			if (ret != -ENXIO)
 				em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
 					      client.addr << 1, ret);
 			continue;
@@ -218,7 +218,7 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
 		reg = 0x1c;
 		ret = i2c_smbus_read_byte_data(&client, reg);
 		if (ret < 0) {
-			if (ret != -ENODEV)
+			if (ret != -ENXIO)
 				em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
 					      client.addr << 1, ret);
 			continue;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux