Since v3.12, specifically 153a60bb0fac ([media] rc: add feedback led trigger for rc keypresses), an LED trigger is activated on IR keydown whether or not a keypress is generated (i.e. even if there's no matching keycode). However the repeat and keyup logic isn't used unless there is a keypress, which results in non-keypress keydown events turning on the LED and not turning it off again. On the assumption that the intent was for the LED only to light up on valid key presses (you probably don't want it lighting up for the wrong remote control for example), move the led_trigger_event() call inside the keycode check. Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx> Cc: Sean Young <sean@xxxxxxxx> Cc: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Cc: linux-media@xxxxxxxxxxxxxxx --- Was that the original intent? If not it could be tweaked to set dev->keypressed in either case instead, so that they LED trigger works for unmapped scancodes too. --- drivers/media/rc/rc-main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 46da365..cff9d53 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -649,9 +649,10 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode, "key 0x%04x, scancode 0x%04x\n", dev->input_name, keycode, scancode); input_report_key(dev->input_dev, keycode, 1); + + led_trigger_event(led_feedback, LED_FULL); } - led_trigger_event(led_feedback, LED_FULL); input_sync(dev->input_dev); } -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
