The PCM audio hardware is not properly described. This causes the driver
to use a period shorter than it should be, causing problems with USB 3.0.
This is a first attempt to fix it.
PS.:
1) This patch is not to be applied. It contains an ugly debug added for
testing purposes, and uses a C99 comment;
2) em28xx can accept other sample rates. It would be good to add support
for those other rates, as some audio playback hardware may not support
48KHz (I have one such hardware here).
Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c
index 30ee389a07f0..1de4fac3db97 100644
--- a/drivers/media/usb/em28xx/em28xx-audio.c
+++ b/drivers/media/usb/em28xx/em28xx-audio.c
@@ -87,6 +87,14 @@ static void em28xx_audio_isocirq(struct urb *urb)
struct snd_pcm_substream *substream;
struct snd_pcm_runtime *runtime;
+size_t size = 0;
+
+if (!urb->status)
+for (i = 0; i < urb->number_of_packets; i++)
+ size =+ urb->iso_frame_desc[i].actual_length;
+
+printk("%s, status %d, %d packets (size %d)\n", __func__, urb->status, urb->number_of_packets, size);
+
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
@@ -215,14 +223,15 @@ static struct snd_pcm_hardware snd_em28xx_hw_capture = {
.formats = SNDRV_PCM_FMTBIT_S16_LE,
- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT,
+// .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT,
+ .rates = SNDRV_PCM_RATE_48000,
.rate_min = 48000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */
- .period_bytes_min = 64, /* 12544/2, */
+ .period_bytes_min = 188,
.period_bytes_max = 12544,
.periods_min = 2,
.periods_max = 98, /* 12544, */
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
